journal article·2015-06

Rear-side All-by-Laser Point-contact Scheme for liquid-phase-crystallized silicon on glass solar cells

M. Weizman, H. Rhein, K. Bhatti, R. Duman, C. Schultz, M. Schüle, O. Gabriel, S. Ring, S. Kirner, C. Klimm, M. Nittel, S. Gall, B. Rau, B. Stannowski, R. Schlatmann, F. Fink

Publisher page

Abstract

Abstract We report here on the development of a rear-side point-contact scheme for liquid-phase-crystallized silicon on glass solar cells, which uses laser for all structuring and contact-post-treatment steps. Our contact scheme is based on the procedure developed by CSG Solar and contains two main innovations. First, we demonstrate here that it is possible to form contact holes in the back-reflector resist layer by laser ablation instead of printing droplets of an etch solution with inkjet. The use of laser for forming holes in the resist holds promise for enhancing the precision and reliability of this process. Second, we show that for both p and n-type absorbers, laser firing at the absorber-point-contacts can be used to increase the doping concentration beneath the metal contact and thereby achieve low-resistance contacts. Using the All-by-Laser Point-contact Scheme (ALPS) we were able to reach a solar cell conversion efficiency of 11.5% for a planar n-type laser-crystallized silicon absorber with an amorphous/crystalline heterojunction structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Remarkable progress in thin-film silicon solar cells using high-efficiency triple-junction technology10.1016/j.solmat.2013.04.016 ↗
2. Electron-beam crystallized large grained silicon solar cell on glass substrate10.1002/pip.1098 ↗
3. Conversion efficiency and process stability improvement of electron beam crystallized thin film silicon solar cells on glass10.1016/j.solmat.2013.12.021 ↗
4. Thin-film polycrystalline silicon solar cells formed by diode laser crystallization10.1002/pip.2282 ↗
5. Progress in laser-crystallised thin-film polycrystalline silicon solar cells10.1109/JPHOTOV.2013.2280016 ↗
6. Micro-structural defects in polycrystalline silicon thin-film solar cells on glass by solid-phase crystallisation and laser-induced liquid-phase crystallisation10.1016/j.solmat.2014.09.021 ↗
7. Impact of dislocations and dangling bond defects on the electrical performance of crystalline silicon thin films10.1063/1.4890625 ↗
8. Silicon thin-film solar cells on glass with open-circuit voltages above 620mV formed by liquid-phase crystallization10.1109/JPHOTOV.2014.2358799 ↗
9. Towards wafer quality crystalline silicon thin-film solar cells on glass10.1016/j.solmat.2014.04.035 ↗
10. Crystalline silicon on glass (CSG) thin-film solar cell modules10.1016/j.solener.2004.06.023 ↗
11. Efficiency and stability enhancement of laser-crystallized polycrystalline silicon thin-film solar cells by laser firing of the absorber contacts10.1016/j.solmat.2013.09.033 ↗
12. D.L. Meier, H.P. Davis, R.A. Garcia, J.A. Jessup, A.F. Carroll, Self-doping contacts to silicon using silver coated with a dopant source, in: Proceedings of the Conference Record of theTwenty-Eighth IEEE Photovoltaic Specialists Conference, 2000, 69–74.10.1109/PVSC.2000.915755 ↗
13. Interplay of amorphous silicon disorder and hydrogen content with interface defects in amorphous/crystalline silicon heterojunctions10.1063/1.3455900 ↗
14. The role of hydrogen in a-Si:H—results of evolution and annealing studies10.1016/0022-3093(83)90547-1 ↗
15. Improving the performance of amorphous and crystalline silicon heterojunction solar cells by monitoring surface passivation10.1016/j.jnoncrysol.2011.12.063 ↗
16. Passivation of textured silicon wafers: influence of pyramid size distribution, a-Si:H deposition temperature, and post-treatment10.1016/j.egypro.2013.07.360 ↗
17. PECVD intermediate and absorber layers applied in liquid-phase crystallized silicon solar cells on glass substrates10.1109/JPHOTOV.2014.2354257 ↗
18. Influence of hydrogen plasma on the defect passivation of polycrystalline si thin film solar cells10.1002/ppap.200930202 ↗
19. Analysis of short circuit current gains by an anti-reflective textured cover on silicon thin film solar cells10.1002/pip.2249 ↗
20. Impact of the transparent conductive oxide work function on injection-dependent a-Si:H/c-Si band bending and solar cell parameters10.1063/1.4799042 ↗
21. Direct determination of the band offset in atomic layer deposited ZnO/hydrogenated amorphous silicon heterojunctions from X-ray photoelectron spectroscopy valence band spectra10.1063/1.4879915 ↗
22. Improving the a-Si:H(p) rear emitter contact of n-type silicon solar cells10.1016/j.solmat.2012.06.036 ↗
23. Role of front contact work function on amorphous silicon/crystalline silicon heterojunction solar cell performance10.1109/LED.2003.811405 ↗