Morphology control in co-evaporated bulk heterojunction solar cells
Source abstract
Abstract
Bulk heterojunction solar cells made by vacuum co-evaporation of polythiophene (PTh) and fullerene (C60) are reported and the blend morphology control through donor-acceptor composition and post-situ annealing demonstrated. Co-deposited heterojunctions are shown to generate about 60% higher photocurrents than their thickness-optimized PTh/C60 planar heterojunction counterparts. Furthermore, by annealing the devices post-situ the power conversion efficiency is improved by as much as 80%. UV-vis, XRD and AFM analysis shows that the enhanced photoresponse is a result of favorable morphological development of PTh upon annealing. Annealing-induced improvement of the donor-acceptor network is demonstrated across a wide range of compositions (20-80% PTh). This illustrates that good morphology control is possible in co-evaporated polymer-fullerene blends through multiple parameters and differentiates this donor-acceptor combination from the standard small-molecule systems. © 2013 The Authors.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Heliatek Consolidates its Technology Leadership by Establishing a New World Record for Organic Solar Technology with a Cell Efficiency of 12%, 〈http://www.heliatek.com〉 (accessed February, 2013).
2. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
3. On the morphology of polymer-based photovoltaics10.1002/polb.23063 ↗
4. Controlling nanoscale morphology in polymer photovoltaic devices10.1016/j.nantod.2010.05.004 ↗
5. Solar cells based on block copolymer semiconductor nanowires: effects of nanowire aspect ratio10.1021/nn1017632 ↗
6. Efficient organic tandem solar cells based on small molecules10.1002/adfm.201002760 ↗
7. C. Bishop, Vacuum Deposition onto Webs, Films and Foils William Andrew, 2007.
8. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
9. Polymer photovoltaic cells—enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
10. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
11. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
12. Conjugated polymer aggregates in solution: control of interchain interactions10.1063/1.478288 ↗
13. Nanoscale morphology of conjugated polymer/fullerene-based bulk-heterojunction solar cells10.1002/adfm.200305026 ↗
14. Effects of postproduction treatment on plastic solar cells10.1002/adfm.200390011 ↗
15. Toward high-performance polymer solar cells: the importance of morphology control10.1021/ma0618732 ↗
16. Influence of molecular architecture and intermixing on the photovoltaic, morphological and spectroscopic properties of CuPc-C-60 heterojunctions10.1016/j.solmat.2004.02.027 ↗
17. Graded donor–acceptor heterojunctions for efficient organic photovoltaic cells10.1002/adma.201002454 ↗
18. Thick C-60:ZnPc bulk heterojunction solar cells with improved performance by film deposition on heated substrates10.1063/1.3154554 ↗
19. Increase in internal quantum efficiency in small molecular oligothiophene: C(60) mixed heterojunction solar cells by substrate heating10.1063/1.3475766 ↗
20. Efficient bulk heterojunction photovoltaic cells using small-molecular-weight organic thin films10.1038/nature01949 ↗
21. Annealing effect in the sexithiophene: C(70) small molecule bulk heterojunction organic photovoltaic cells10.1016/j.solmat.2009.02.007 ↗
22. Co-evaporant induced crystalline donor: acceptor blends in organic solar cells10.1002/adma.201101305 ↗
23. Small molecular weight organic thin-film photodetectors and solar cells10.1063/1.1534621 ↗
24. Solar cells utilizing small molecular weight organic semiconductors10.1002/pip.788 ↗
25. Organic solar-cell based on multistep charge separation system10.1063/1.108133 ↗
26. Vacuum-processed small molecule solar cells based on terminal acceptor-substituted low-band gap oligothiophenes10.1039/c0cc04541a ↗
27. Mixed donor–acceptor molecular heterojunctions for photovoltaic applications II. Device performance10.1063/1.2142073 ↗
28. Organic small molecule solar cells with a homogeneously mixed copper phthalocyanine: C-60 active layer10.1063/1.1755833 ↗
29. Efficient, ordered bulk heterojunction nanocrystalline solar cells by annealing of ultrathin squaraine thin films10.1021/nl1018194 ↗
30. Crystal network formation in organic solar cells10.1016/S0927-0248(99)00096-3 ↗
31. Efficiency enhancement of P3HT/PCBM bulk heterojunction solar cells by attaching zinc phthalocyanine to the chain-end of P3HT10.1039/c1jm11563d ↗
32. Vacuum-deposited planar heterojunction polymer solar cells10.1021/am1008985 ↗
33. Infrared and photoelectron spectroscopy study of vapor phase deposited poly (3-hexylthiophene)10.1016/j.apsusc.2009.06.031 ↗
34. Effect of CuI anode buffer layer on the growth of polymers thin films and on the performances of organic solar cells10.4236/nr.2013.41A016 ↗
35. Determination of the optical constants of a vacuum evaporated polythiophene thin film10.1088/0031-8949/84/04/045801 ↗
36. Bilayer heterojunction polymer solar cells using unsubstituted polythiophene via oxidative chemical vapor deposition10.1016/j.solmat.2011.11.040 ↗
37. Effect of side groups on the vacuum thermal evaporation of polythiophenes for organic electronics10.1016/j.orgel.2012.01.005 ↗
38. Structure properties of conjugated conductive polymers 1. Neutral poly(3-alkylthiophene)S10.1021/ma00049a001 ↗
39. Dynamics of crystallization and disorder during annealing of P3HT/PCBM bulk heterojunctions10.1021/ma102817z ↗
40. Influence of nanomorphology on the photovoltaic action of polymer–fullerene composites10.1088/0957-4484/15/9/035 ↗
41. Compositional dependence of the performance of poly(p-phenylene vinylene): methanofullerene bulk-heterojunction solar cells10.1002/adfm.200400345 ↗
42. Design rules for donors in bulk-heterojunction solar cells—towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
43. Cathode dependence of the open-circuit voltage of polymer: fullerene bulk heterojunction solar cells10.1063/1.1620683 ↗
44. P3HT/PCBM bulk heterojunction solar cells: impact of blend composition and 3D morphology on device performance10.1002/adfm.200902247 ↗
45. Efficient oligothiophene: fullerene bulk heterojunction organic photovoltaic cells10.1016/j.orgel.2008.03.008 ↗
46. Postfabrication annealing of pentacene-based photovoltaic cells10.1063/1.1842358 ↗
47. Effect of annealing on bulk heterojunction organic solar cells based on copper phthalocyanine and perylene derivative10.1016/j.synthmet.2011.11.018 ↗
48. A hybrid planar-mixed molecular heterojunction photovoltaic cell10.1002/adma.200400617 ↗
49. P-I-N Like behavior in 3-Layered organic solar-cells having a co-deposited interlayer of pigments10.1063/1.352274 ↗
50. Effect of crystallization on the electronic energy levels and thin film morphology of P3HT:PCBM blends10.1021/ma102841e ↗
51. Multiscale molecular simulations of the nanoscale morphologies of P3HT: PCBM blends for bulk heterojunction organic photovoltaic cells10.1039/c1ee01508g ↗
52. Bulk heterojunctions based on native polythiophene10.1021/cm800431s ↗
53. Effect of LiF/metal electrodes on the performance of plastic solar cells10.1063/1.1446988 ↗
54. Very-high-efficiency double-heterostructure copper phthalocyanine/C-60 photovoltaic cells10.1063/1.1384001 ↗
55. On the function of a bathocuproine buffer layer in organic photovoltaic cells10.1063/1.2362624 ↗
56. Interface materials for organic solar cells10.1039/b921624c ↗
57. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
58. Charge transport and photocurrent generation in poly (3-hexylthiophene): methanofullerene bulk-heterojunction solar cells10.1002/adfm.200500420 ↗
59. X-ray-scattering from polythiophene—crystallinity and crystallographic structure10.1021/ma00152a028 ↗
60. Correlations between structure and far-infrared active modes in polythiophenes10.1021/jp804813p ↗
61. Structural transitions and electrical conductivity of C-60 films at high temperature10.1557/JMR.1996.0260 ↗
62. Nanoscale morphology of high-performance polymer solar cells10.1021/nl048120i ↗
63. The molecular structure of polymer–fullerene composite solar cells and its influence on device performance10.1021/ma902211u ↗
64. P3HT/PCBM bulk heterojunction organic photovoltaics: correlating efficiency and morphology10.1021/nl103482n ↗
65. Competition between fullerene aggregation and poly(3-hexylthiophene) crystallization upon annealing of bulk heterojunction solar cells10.1021/nn2010816 ↗
66. Alexander · 1969
67. Exciton diffusion and charge transfer dynamics in nano phase-separated P3HT/PCBM blend films10.1039/c0nr01002b ↗
68. V.V. Tsukruk, S. Singamaneni, Scanning Probe Microscopy of Soft Matter, 2011.10.1002/9783527639953 ↗
69. P3HT:PCBM, best seller in polymer photovoltaic research10.1002/adma.201100792 ↗