journal article·2019-01

Predictive simulation framework for boron diffused p+ layer optimization: Sensitivity analysis of boron tube diffusion process parameters of industrial n-type silicon wafer solar cells

Mengjie Li, Johnson Wong, Er-Chien Wang, John Rodriguez, Shubham Duttagupta, Ganesh Samudra, Armin G. Aberle, Rolf Stangl

Publisher page

Abstract

Abstract A predictive simulation framework, combining process and device simulation, is developed in order to assist in BBr3 boron tube furnace diffusion process optimization for n-type silicon wafer solar cells. After an appropriate calibration, the influence of the tube diffusion process parameters (drive-in temperature, oxidation temperature, etc) on the final solar cell efficiency can be predicted. The key process parameters of BBr3 tube furnace diffusion are identified and their sensitivity on the final solar cell efficiency is calculated. An efficiency gain of 0.6% absolute to 20.0% is realized by optimizing only the front-side boron diffused layer of the front and back contacted cells. The efficiency is further improved to 20.9% by introduction of a local back-surface field design. A further optimization potential of up to 0.2% absolute is predicted by modifying the boron diffusion profile.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Impact of boron doping profiles on the specific contact resistance of screen printed Ag–Al contacts on silicon10.1016/j.solmat.2015.04.039 ↗
2. Extending the limits of screen-printed metallization of phosphorus- and boron-doped surfaces10.1016/j.solmat.2016.05.064 ↗
3. Microscopic origin of the aluminium assisted spiking effects in n-type silicon solar cells10.1016/j.solmat.2014.05.036 ↗
4. F. Kiefer, R. Peibst, T. Ohrdes, J. Krügener, H. J. Osten, and R. Brendel, Emitter recombination current densities of boron emitters with silver/aluminum pastes, in: Proceedings of the 2014 IEEE 40th Photovoltaic Specialist Conference (PVSC), 2014, pp. 2808–2812.10.1109/PVSC.2014.6925514 ↗
5. Metallization–induced recombination losses of bifacial silicon solar cells10.1002/pip.2479 ↗
6. Formation of Ag/Al screen-printing contacts on B emitters10.1109/JPHOTOV.2014.2364117 ↗
7. Two-dimensional modeling of the metallization-induced recombination losses of screen-printed solar cells10.1109/JPHOTOV.2014.2365453 ↗
8. Structural investigation of printed Ag/Al contacts on silicon and numerical modeling of their contact recombination10.1109/JPHOTOV.2016.2591318 ↗
9. Towards understanding the characteristics of Ag–Al spiking on boron-doped silicon for solar cells10.1016/j.solmat.2015.11.032 ↗
10. Determination of metallization induced recombination losses of screen printed solar cell contacts and its dependence on the doping profile10.1109/JPHOTOV.2018.2866177 ↗
11. D.E. Kane, R.M. Swanson, Measurement of the Emitter Saturation Current by a Contactless Photoconductivity Decay Method, 1985, pp. 578–583.
12. J. Wong, Griddler: intelligent computer aided design of complex solar cell metallization patterns, in: Proceedings of the 39th IEEE Photovoltaic Specialists Conference (PVSC), 2013, pp. 0933–0938.10.1109/PVSC.2013.6744296 ↗
13. Synopsys, Synopsys TCAD, version L-2016.03, Available at: 〈http://www.synopsys.com〉, ed.
14. Numerical simulation of doping process by BBr3 tube diffusion for industrial n-type silicon wafer solar cells10.1109/JPHOTOV.2017.2679342 ↗
15. K.R. McIntosh, P.P. Altermatt, A freeware 1D emitter model for silicon solar cells, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference (PVSC), 2010, pp. 002188–002193.10.1109/PVSC.2010.5616124 ↗
16. K.R. McIntosh et al., An examination of three common assumptions used to simulate recombination in heavily doped silicon, in: Proceedings of the 28th European Photovoltaic Solar Energy Conference and Exhibition, 2013.
17. P. Lighthouse. Available at: 〈https://www.pvlighthouse.com.au/〉.
18. Models for numerical device simulations of crystalline silicon solar cells—a review10.1007/s10825-011-0367-6 ↗
19. On effective surface recombination parameters10.1063/1.4886595 ↗
20. H. Wagner et al., Analyzing emitter dopant inhomogeneities at textured Si surfaces by using 3D process and device simulations in combination with SEM imaging, in: Proceedings of the 38th IEEE Photovoltaics Specialists Conference, Austin, Texas, June 3–8, 2012.10.1109/PVSC.2012.6317625 ↗