journal article·2017-11

Thermal stability of sodium nitrate microcapsules for high-temperature thermal energy storage

Junfeng Li, Wu Lu, Zhengping Luo, Yibing Zeng

Publisher page

Abstract

Abstract The NaNO3 microcapsules (MCP-NaNO3-2) with good thermal stability were prepared by twice repeating the process of microencapsulation. The thermal stability of MCP-NaNO3-2 was tested by thermal cycles and high-temperature heating in the furnace. The thermal properties, such as latent heat, melting point, supercooling degree, were determined by thermogravimetric analyzer (TG) and differential scanning calorimetry (DSC). The microcapsule morphologies were observed by optical microscope and scanning electron microscope. After 80 thermal cycles mainly between 250 and 350 ℃, the latent heat of MCP-NaNO3-2 only had a small reduction of about 3.6%, the melting point of MCP-NaNO3-2 only decreased by about 1 ℃, and the supercooling degree of MCP-NaNO3-2 slightly fluctuated within about 2 ℃. Additionally, the thermal properties of the MCP-NaNO3-2 heated for 5 h at 350, 450, 500, and 550 ℃ showed that the latent heat of MCP-NaNO3-2 was relatively stable until 500 ℃, from 136.1 to 130.3 J/g, but sharply decreased to 110.2 J/g at 550 ℃. It is concluded that MCP-NaNO3-2 has good thermal stability in thermal cycles and at the high temperature up to 500 ℃ and has a good potential for high-temperature thermal energy storage.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Design of new molten salt thermal energy storage material for solar thermal power plant10.1016/j.apenergy.2012.10.048 ↗
2. Development of new molten salts with LiNO3 and Ca(NO3)2 for energy storage in CSP plants10.1016/j.apenergy.2013.12.061 ↗
3. Preparation and thermal properties of high-purified molten nitrate salt materials with heat transfer and storage10.1515/htmp-2014-0147 ↗
4. The preparation and properties of multi-component molten salts10.1016/j.apenergy.2009.06.022 ↗
5. Thermal compatibility of Sodium Nitrate/Expanded Perlite composite phase change materials10.1016/j.applthermaleng.2016.03.108 ↗
6. Energy storage for desalination processes powered by renewable energy and waste heat sources10.1016/j.apenergy.2014.06.061 ↗
7. Study on preparation and thermal properties of sodium nitrate/silica composite as shape-stabilized phase change material10.1016/j.tca.2015.05.023 ↗
8. Latent heat storage with tubular-encapsulated phase change materials (PCMs)10.1016/j.energy.2014.03.067 ↗
9. Thermal characterisation of binary sodium/lithium nitrate salts for latent heat storage at medium temperatures10.1016/j.solmat.2016.08.017 ↗
10. Two–tank molten salt storage for parabolic trough solar power plants10.1016/S0360-5442(03)00193-2 ↗
11. Thermal reliability test of Al–34%Mg–6%Zn alloy as latent heat storage material and corrosion of metal with respect to thermal cycling10.1016/j.enconman.2006.05.017 ↗
12. Thermal reliability test of some fatty acids as PCMs used for solar thermal latent heat storage applications10.1016/S0196-8904(02)00251-0 ↗
13. Preparation, thermal properties and thermal reliability of capric acid/expanded perlite composite for thermal energy storage10.1016/j.matchemphys.2007.12.016 ↗
14. Preparation, thermal properties and thermal reliability of palmitic acid/expanded graphite composite as form-stable PCM for thermal energy storage10.1016/j.solmat.2008.11.057 ↗
15. One thousand thermal cycles of magnesium chloride hexahydrate as a promising PCM for indoor solar cooking10.1016/j.enconman.2010.10.043 ↗
16. Thermal cycle testing of calcium chloride hexahydrate as a possible PCM for latent heat storage10.1016/j.solmat.2008.02.021 ↗
17. Accelerated thermal cycle test of latent heat-storage materials10.1016/S0038-092X(99)00045-6 ↗
18. Accelerated thermal cycle test of acetamide, stearic acid and paraffin wax for solar thermal latent heat storage applications10.1016/S0196-8904(01)00131-5 ↗
19. Characterization of sodium nitrate as phase change material10.1007/s10765-011-1113-9 ↗
20. Thermal stability of the eutectic composition in LiNO3–NaNO3–KNO3 ternary system used for thermal energy storage10.1016/j.solmat.2012.01.009 ↗
21. LiNO3–NaNO3–KNO3 salt for thermal energy storage: thermal stability evaluation in different atmospheres10.1016/j.tca.2013.02.029 ↗
22. Review on shell materials used in the encapsulation of phase change materials for high temperature thermal energy storage10.1016/j.rser.2015.03.038 ↗
23. Synthesis and thermal properties of novel sodium nitrate microcapsules for high-temperature thermal energy storage10.1016/j.solmat.2016.09.051 ↗
24. Conversion behavior and resulting mechanical properties of polysilazane-based coatings10.1016/j.jeurceramsoc.2011.09.005 ↗