journal article·2016-12

Flexographic printing – towards an advanced front side metallization approach with high throughput and low silver consumption

A. Lorenz, C. Gredy, S. Beyer, Y. Yao, P. Papet, J. Ufheil, A. Senne, H. Reinecke, F. Clement

Publisher page

Abstract

Abstract Rotational flexographic printing technology is a highly promising approach to increase the productivity of the cost-intensive solar cell metallization process. The ability to realize narrow contact fingers with very low silver consumption makes this technology particularly attractive for the front side metallization of busbarless solar cells in combination with multi-wire interconnection like Meyer Burger’s SmartWire Connection Technology (SWCT). Within this work, we investigate the feasibility of this approach on solar cells with 156 mm edge length. Two types of silver inks are prepared and evaluated with focus on optical and electrical properties of the printed front side grid. Both inks achieve sufficient lateral finger resistances below 20 Ω/cm. A low specific contact resistance of ρc,95%=3.0±0.6 m Ω cm2 is obtained with ink A. Using flexographic printing, Aluminum back surface field Czrochalski-grown Silicon busbarless solar cells with a maximum conversion efficiency of η=19.4% (η∅=19.0%) are fabricated and interconnected to a mini-module. The mini-module obtains an aperture conversion efficiency of η=15.8%. The origin of the cell-to-module (CTM) losses are examined in detail. It is shown that a certain part of the CTM-losses originates from the characteristics of the used GridTOUCH I–V-measurement device. Further sources of possible CTM losses are investigated using electroluminescence measurement (EL) and discussed in detail.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanowire Synthesis and Applications · Silicon and Solar Cell Technologies · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. M. Hörteis, P. Richter, S.W. Glunz, Improved front side metallization by aerosol jet printing of hotmelt inks, in: WIP (Ed.), Proceedings of the 23rd EUPVSEC, 2008, pp. 1402–1405.
2. M. Hörteis, A. Mette, P. Richter, F. Fidorra, S. Glunz, Further progress in metal aerosol jet printing for front side metallization of silicon solar cells, in: WIP (Ed.), Proceedings of the 22nd EUPVSEC, 2007, pp. 1039–1042.
3. A. Ebong, B. Rounsaville, I.B. Cooper, K. Tate, A. Rohatgi, S. Glunz, M. Horteis, A. Met, M. Gundermann, Xjet. High efficiency silicon solar cells with ink jetted seed and plated grid on high sheet resistance emitter, in: IEEE (Ed.), Proceedings of the 35th IEEE Photovoltaic Specialists Conference, 2010, pp. 1363–1367.10.1109/PVSC.2010.5614376 ↗
4. Inkjet technology for crystalline silicon photovoltaics
5. Electrical properties of fine line printed and light-induced plated contacts on silicon solar cells10.1002/pip.938 ↗
6. Fine-line silver pastes for seed layer screen printing with varied glass content10.1016/j.egypro.2013.11.086 ↗
7. K. Hashimoto, M. Ouchi, N. Nakamura, E. Kobayashi, Y. Watabe, Low Cost module with heterojunction solar cells applied gravure offset printing and multi-wire technologies, in: WIP (Ed.), Proceedings of the 28th EUPVSEC, 2013, pp. 1073–1076.
8. Patterning of micro-scale conductive networks using reel-to-reel flexographic printing10.1016/j.tsf.2010.05.125 ↗
9. Impact of metered ink volume on reel-to-reel flexographic printed conductive networks for enhanced thin film conductivity10.1016/j.tsf.2011.08.050 ↗
10. Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing10.1039/c0jm01178a ↗
11. Development of MnO2 cathode inks for flexographically printed rechargeable zinc-based battery10.1016/j.jpowsour.2014.06.032 ↗
12. Fabrication of conductive metal lines by plate-to-roll pattern transfer utilizing edge dewetting and flexographic printing10.1016/j.jcis.2009.11.003 ↗
13. Front-side metalization by means of flexographic printing10.1016/j.egypro.2011.06.186 ↗
14. S. Thibert, J. Jourdan, B. Bechevet, S. Mialon, D. Beneventi, D. Chaussy, N. Reverdy-Bruas, Flexographic process for front side metallization of silicon solar Cell, in: WIP (Ed.), Proceedings of the 28th EUPVSEC, 2013, pp. 1013–1016.
15. S. Thibert, D. Chaussy, D. Beneventi, N. Reverdy-Bruas, J. Jourdan, B. Bechevet, S. Mialon, Silver ink experiments for silicon solar cell metallization by flexographic process, in: Proceedings of the 38th IEEE PVSC, 2012 pp. 2266–2270.10.1109/PVSC.2012.6318049 ↗
16. Developing a high throughput printing technology for silicon solar cell front side metallisation using flexography
17. T. Söderström, P. Papet, Y. Yao, J. Ufheil, SmartWire Connection Technology, 2014.
18. Solar cell improvement by using a multi busbar design as front electrode10.1016/j.egypro.2012.07.056 ↗
19. Evaluation of flexographic printing technology for multi-busbar solar cells10.1016/j.egypro.2015.03.296 ↗
20. A. Lorenz, A. Kalio, G.T. Hofmeister, S. Nold, A. Kraft, J. Bartsch, A. Wolf, M. Dreher, F. Clement, D. Biro, Flexographic printing – high throughput technology for fine line seed layer printing on silicon solar cells, in: WIP (Ed.), Proceedings of the 28th EUPVSEC, 2013, pp. 1017–1023.
21. Spatially resolved contact-resistance measurements on crystalline silicon solar cells10.1002/pssa.200925077 ↗
22. Comprehensive analysis of advanced solar cell contacts consisting of printed fine-line seed layers thickened by silver plating10.1002/pip.855 ↗
23. J.P. Hermans, P. Papet, K. Pacheco, W. Brok, B. Strahm, J. Rochat, T. Söderström, Y. Yao, Advanced metallization concepts by inkjet printing. in: WIP (Ed.),. Proceedings of the 29th EUPVSEC, 2014, pp. 518–522.
24. A.G. Meyer Burger, The GridTouch contacting system: Article PV Production Annual 2014. Available at: 〈http://www.meyerburger.com/fileadmin/user_upload/meyerburger.com/Downloads/Publikationen/Dokumente/2014_PV_Annual_GridTouch.pdf〉. 2014 (accessed 10.12.15).
25. Impact of texture roughness on the front-side metallization of stencil-printed silicon solar cells10.1109/JPHOTOV.2015.2416916 ↗
26. Analytical modeling of industrial-related silicon solar cells10.1109/JPHOTOV.2013.2281105 ↗
27. T. Fellmeth, Silicon Solar Cells for the Application in Low Concentrator Systems-Development and Characterization (Dissertation), Eberhard Karls Universität Tübingen, Tübingen, 2014.
28. A. Mette, New Concepts For Front Side Metallization of Industrial Silicon Solar Cells (Dissertation), Albert-Ludwigs-Universität, Freiburg, 2007.
29. Goetzberger · 1998
30. Fill factor analysis of solar cells' current-voltage curves10.1002/pip.979 ↗
31. Optimized Interconnection of passivated emitter and rear cells by experimentally verified modeling10.1109/JPHOTOV.2016.2514706 ↗
32. Unified methodology for determining CTM ratios: systematic prediction of module power10.1016/j.solmat.2014.06.025 ↗
33. New cell metallization patterns for heterojunction solar cells interconnected by the smart wire connection technology10.1016/j.egypro.2015.03.039 ↗
34. Y. Yao, P. Papet, J. Hermans, T. Soderstrom, H. Mehlich, M. Konig, A. Waltinger, D. Habermann, A. Richter, Module integration of solar cells with diverse metallization schemes enabled by SmartWire connection technology. in: Proceedings of the 2015 IEEE 42nd Photovoltaic Specialists Conference (PVSC), pp. 1–5.10.1109/PVSC.2015.7355648 ↗