Characteristics of indium zinc oxide thin films prepared by direct current magnetron sputtering for flexible solar cells
Source abstract
Abstract
Abstract The In 2 O 3 –ZnO (IZO) thin films were prepared on polyethylene terephthalate substrate at room temperature by direct current (dc) magnetron sputtering. The properties of IZO thin films were studied in terms of O 2 concentration and deposition parameters. As the O 2 concentration in O 2 /Ar gas increased, the transmittances of the films were increased up to 90% and the resistivities were decreased. The systematic variation of process parameters including dc power, gas pressure and target-to-substrate distance was performed to examine the properties of the deposited films. It was disclosed that there was an optimum O 2 concentration for high transmittance and low resistivity. With decrease in dc power and gas pressure and increase in target-to-substrate distance, the IZO films with high transmittance and low resistivity were obtained. The observation of the IZO films by atomic force microscopy indicated that the microstructure and surface morphology of the films were responsible for the transmittance. It was demonstrated that IZO films with a resistivity of 5.1×10 −4 Ω cm and an optical transmission of 90% in the visible spectrum could be prepared at room temperature on flexible substrates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Thin-Film Transistor Technologies · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. The use of tin oxide thin films as a transparent electrode in PPV based light-emitting diodes10.1016/S0040-6090(00)00967-6 ↗
2. Morphological and electrical properties of indium tin oxide films prepared at a low processing temperature for flexible organic light-emitting devices10.1016/S0921-5107(01)00541-4 ↗
3. Electrical and optical characteristics of indium tin oxide thin films deposited by cathodic sputtering for top emitting organic electroluminescent devices
4. Comparative study on structure and internal stress in tin-doped indium oxide and indium-zinc oxide films deposited by r.f. magnetron sputtering10.1016/j.tsf.2003.08.047 ↗
5. Enhancement of photocurrent and photovoltage of dye-sensitized solar cells with TiO2 film deposited on indium zinc oxide substrate10.1021/cm030542q ↗
6. Amorphous ITO thin films prepared by DC sputtering for electrochromic applications10.1016/S0040-6090(02)00656-9 ↗
7. A study of indium tin oxide thin film deposited at low temperature using facing target sputtering system10.1016/S0257-8972(01)01693-0 ↗
8. Preparation and characteristic of ZnO thin film with high and low resistivity for an application of solar cell10.1016/j.tsf.2005.08.213 ↗
9. Effects of step-deposition on structures and properties of transparent conducting aluminum-doped zinc oxide films prepared by DC magnetron sputtering10.1016/j.solmat.2006.04.012 ↗
10. Preparation and characterization of sprayed FTO thin films10.1051/epjap:2007090 ↗
11. Indium-doped zinc oxide films prepared by simultaneous radio-frequency and d.c. magnetron sputtering10.1002/(SICI)1096-9918(199908)28:1<271::AID-SIA592>3.0.CO;2-1 ↗
12. Organic light-emitting diode on indium zinc oxide films prepared by ion-assisted deposition/d.c. sputtering system10.1016/S0038-1101(01)00307-0 ↗
13. Influence of DC magnetron sputtering parameters on the properties of amorphous indium zinc oxide thin film10.1016/j.tsf.2003.09.014 ↗
14. Temperature dependence of the microstructure and resistivity of indium zinc oxide films deposited by direct current magnetron reactive sputtering10.1016/j.tsf.2007.07.181 ↗