journal article·2011-02

Microstructure evolution of CuInSe2 thin films prepared by single-bath electrodeposition

Tong Ren, Rui Yu, Min Zhong, Jingying Shi, Can Li

Publisher page

Abstract

The composition and the microstructure evolutions of CuInSe2 thin films under single-bath electrodeposition processes were investigated. It was found that the film composition was mainly determined by the [Se4+]/[Cu2+] ratios in solution, but the film microstructure is strongly dependent on the initial concentrations of Se4+, Cu2+, and In3+ precursors. Higher initial concentrations of Cu2+ and In3+ in solution are beneficial for the fabrication of compact CuInSe2 thin films with highly crystallized and large grain sized chalcopyrite phase. The microstructure evolution suggests that prior adsorption and reduction of Cu2+ ions and the formation of Cu2Se compound on the substrate can promote the nucleation, growth, and coarsening of CuInSe2 crystal to form a high quality thin film during the electrodeposition processes. (C) 2010 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Properties of 19.2% efficiency ZnO/CdS/CuInGaSe2 thin-film solar cells10.1002/pip.494 ↗
2. Development of thin-film Cu(In,Ga)Se2 and CdTe solar cells10.1002/pip.527 ↗
3. Three-stage growth of Cu–In–Se polycrystalline thin films by chemical spray pyrolysis10.1016/j.solmat.2006.06.063 ↗
4. Growth, structural and optical properties of non-stoichiometric CuIn(SSe) thin films deposited by solution growth technique for photovoltaic application10.1016/j.jpcs.2005.11.013 ↗
5. Electrodeposition of CuInGaSe precursor films: optimization of film composition and morphology10.1016/j.tsf.2004.02.104 ↗
6. CuIn1−xGaxSe2-based photovoltaic cells from electrodeposited precursor films10.1016/S0927-0248(02)00285-4 ↗
7. Solar cells with improved efficiency based on electrodepositied copper indium diselenide thin films10.1002/adma.19940060508 ↗
8. Real-time investigation on the formation of CuInSe2 from ED10.1016/j.solmat.2006.12.012 ↗
9. Controlling growth chemistry and morphology of single-bath electrodeposited Cu(In,Ga)Se2 thin films for photovoltaic application10.1149/1.2186764 ↗
10. First stages of CuInSe2 electrodeposition from Cu(II)–In(III)–Se(IV) acidic solutions on polycrystalline Mo films10.1149/1.2815476 ↗
11. Thin film CuIn1−xGaxSe2 photovoltaic cells from solution-based precursor layers10.1063/1.124716 ↗
12. Chalcopyrite thin film solar cells by electrodeposition10.1016/j.solener.2004.05.024 ↗
13. A voltammetric study of the electrodeposition chemistry in the Cu+In+Se system10.1016/0022-0728(89)80082-8 ↗
14. Formation of copper indium diselenide by electrodeposition10.1016/0022-0728(94)03352-8 ↗
15. Electrodeposition and characterization of CuInSe2 thin films10.1149/1.2048675 ↗
16. Relation between physical properties and deposition conditions of electrodeposited CuInSe210.1149/1.1836977 ↗
17. Photoluminescence study of γ-In2Se3 epitaxial films grown by molecular beam epitaxy10.1016/S0022-2313(99)00319-1 ↗
18. Buffer layers in Cu(In,Ga)Se2 solar cells and modules10.1016/j.tsf.2004.11.118 ↗
19. Analysis of S-rich CuIn(S,Se)2 layers for photovoltaic applications: influence of the sulfurization temperature on the crystalline properties of electrodeposited and sulfurized CuInSe2 precursors10.1063/1.2734103 ↗
20. Analysis of S-rich CuIn(S,Se)2 layers for photovoltaic applications: influence of the sulfurization temperature on the crystalline properties of electrodeposited and sulfurized CuInSe2 precursors10.1063/1.2939833 ↗
21. One-step electrodeposited CuInSe2 thin films studied by Raman spectroscopy10.1016/j.tsf.2007.02.109 ↗
22. Key role of Cu–Se binary phases in electrodeposited CuInSe2 precursors on final distribution of Cu–S phases in CuIn(S,Se)2 absorbers10.1016/j.tsf.2008.10.144 ↗
23. Structural properties of Cu(In,Ga)Se thin films prepared from chemically processed precursor layers10.1016/j.tsf.2008.10.094 ↗
24. Lux–Steiner, Composition and growth procedure-dependent properties of electrodeposited CuInSe2 thin films10.1016/j.jcrysgro.2004.11.147 ↗
25. One step electrodeposition of CuInSe2: improved structural, electronic, and photovoltaic properties by annealing under high selenium pressure10.1063/1.361446 ↗
26. Influence of Cu content on electronic transport and shunting behavior of Cu(In,Ga)Se2 solar cells10.1063/1.2159548 ↗
27. Junction formation studies of one-step electrodeposited CuInSe2 on CdS10.1149/1.1391578 ↗
28. Large area electrodeposition of CuInGaSe10.1016/S0040-6090(99)00863-9 ↗
29. A cadimum-free CuInSe2 superstrate solar cell fabricated by electrodeposition using a ITO/In2Se3/CuInSe2/Au structure10.1002/(SICI)1099-159X(199903/04)7:2<129::AID-PIP252>3.0.CO;2-R ↗
30. Characterization of electrodeposited CuInSe2 (CIS) film10.1016/j.electacta.2005.12.021 ↗
31. A model for the successful growth of polycrystalline films of CuInSe2 by multisource physical vacuum evaporation10.1002/adma.19930050209 ↗