The influence of UV radiation and ozone exposure on the electronic properties of poly-3-octyl-thiophene thin films
Source abstract
Abstract
The modification of the conductivity as well as the nanoscale morphology and electrostatic properties of poly-3-octyl-thiophene (P3OT) thin films have been studied as these films are irradiated by ultraviolet light (UV). Films of about 100 nm thickness were prepared by spin-coating a P3OT solution in toluene on glass substrates. The samples were characterized by electronic transport measurements and non-contact scanning force microscopy (NC-SFM) for every cycle of UV radiation. Nanoscale topographic and electrostatic characterization using NC-SFM were performed on the same location using a specially designed sample holder. A two stage degradation process has been observed, the first one presents a chemical modification of the polymer (decoloration of sample) and free carrier mobility reduction, the second one is characterized by a strong structural modification, thickness reduction, oxygen doping and further mobility reduction. The comparison of these results on P3OT with other studies performed on P3HT will allow for a detailed analysis of the role of side-chains in the degradation mechanism upon UV irradiation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Plastic solar cells10.1002/1616-3028(200102)11:1<15::AID-ADFM15>3.0.CO;2-A ↗
2. 1986
3. Morphological characterization of poly(3-octylthiophene) plasticizer: C60 blends10.1016/S0040-6090(01)01577-2 ↗
4. X-ray-diffraction studies of the three-dimensional structure within iodine-intercalated poly(3-octylthiophene)10.1103/PhysRevB.51.159 ↗
5. Structurally ordered polythiophene nanoparticles for high-performance organic thin-film transistors10.1002/adma.200401660 ↗
6. Optical studies of regioregular poly(3-octylthiophene)s under pressure10.1016/S0379-6779(97)04154-4 ↗
7. Effect of thermal annealing on surface morphology and physical properties of poly(3-octylthiophene) films10.1016/j.polymer.2005.07.032 ↗
8. The mechanism of photo- and thermooxidation of poly(3-hexylthiophene) (P3HT) reconsidered10.1016/j.polymdegradstab.2009.03.005 ↗
9. Analysis of the failure mechanism for a stable organic photovoltaic during 10,000h of testing10.1002/pip.794 ↗
10. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
11. Photo- and thermal degradation of MDMO–PPV:PCBM blends10.1016/j.solmat.2006.10.015 ↗
12. Further insights into the photodegradation of poly(3-hexylthiophene) by means of X-ray photoelectron spectroscopy10.1016/j.tsf.2010.06.042 ↗
13. Effects of long-term UV-visible light irradiation in the absence of oxygen on P3HT and P3HT:PCBM blend10.1016/j.solmat.2010.03.012 ↗
14. High open-circuit voltage photovoltaic devices from carbon-nanotube-polymer composites10.1063/1.1535231 ↗
15. Photovoltaic properties of dye functionalized single-wall carbon nanotube/conjugated polymer devices10.1021/cm0496063 ↗
16. Rabek · 1995
17. Hamid S · 2000
18. Effects of molecular oxygen and ozone on polythiophene-based thin-film transistors10.1063/1.2715445 ↗
19. Ozonization of electronic conducting polymers, part III: the action of ozone on poly[3-pentylthiophene] film10.1016/j.polymdegradstab.2008.04.005 ↗
20. Doping and dedoping processes in poly(3-alkylthiopehenes)10.1016/0379-6779(91)91111-M ↗
21. Degradation studies of doped and dedoped poly(3-octyl thiophene)10.1016/0379-6779(91)91134-V ↗
22. Reversible charge transfer complex between molecular oxygen and poly(3-alkylthiophenes)10.1002/adma.19940061106 ↗
23. Interaction of oxygen with conjugated polymers: charge transfer complex formation with poly(3-alkylthiophenes)10.1021/ja964229j ↗
24. Emission spectroscopic analysis of poly(3-octylthiophene) exposed to plasmas10.1002/app.26509 ↗
25. Dynamics and reversibility of oxygen doping and de-doping for conjugated polymer10.1063/1.2917419 ↗
26. Dopant density determination in disordered organic field-effect transistors10.1063/1.1559933 ↗
27. K. Norrman. Stability and Degradation of Polymer Solar cells. In: Proceedings of ISOS-3, 21–29 October, 2010, Risø (DK), (Invited conference contribution).
28. The electronic behavior of poly(3-octylthiophene) electrochemically synthesized onto Au substrate10.1590/S0103-97332003000200043 ↗
29. Oxygen doping of P3HT:PCBM blends: influence on trap states, charge carrier mobility and solar cell performance10.1016/j.orgel.2010.07.016 ↗
30. Trap distribution and the impact of oxygen-induced traps on the charge transport in poly 3-hexylthiophene10.1063/1.2978237 ↗
31. Hole doping by molecular oxygen in organic semiconductors: band-structure calculations10.1103/PhysRevB.75.235206 ↗
32. Effect of defect-enhanced molecular oxygen adsorption on the imbalance of hole versus electron mobility in conjugated polymers10.1103/PhysRevB.75.195206 ↗
33. The effect of post-processing treatments on inflection points in current–voltage curves of roll-to-roll processed polymer photovoltaics10.1016/j.solmat.2010.06.007 ↗
34. X-ray structural studies of various octyl-substituted polythiophenes macromol
35. WSXM: a software for scanning probe microscopy and a tool for nanotechnology10.1063/1.2432410 ↗
36. Quantitative electrostatic force microscopy-phase measurements10.1088/0957-4484/15/5/038 ↗
37. Enhancing dynamic scanning force microscopy in air: as close as possible10.1088/0957-4484/20/8/085707 ↗
38. Surface potential domains on lamellar P3OT structures10.1088/0957-4484/19/6/065709 ↗
39. J. Abad, A. Urbina, J. Colchero, Organic Electronics Journal, submitted for publication.
40. Charge injection and photooxidation of single conjugated polymer molecules10.1021/ja031929x ↗