journal article·2016-01

Thermal radiation from silicon microcavity coated with thermochromic film

Desong Fan, Qiang Li, Yimin Xuan, Yuchun Xia

Publisher page

Abstract

Abstract A high thermochromic performance is required for the thermochromic film application in space radiator. The performance can be improved by material selection or structure design. Here, we constructed a two-dimensional structure composed of silicon microcavity array coated with thermochromic film. From detailed numerical simulation, we found that periodic microcavity array plays a key role in enhancing the spectral emittance. For 1.5 μm deep microcavity with a 500 nm thick thermochromic film, an emittance peak appears at the wavelength of 12.7 μm, which corresponds to the Fabry–Perot (FP) resonance mode. Another microcavity excitation was observed in the shorter wavelength region, which matches well with its resonance wavelength. Based on the simulations, the optimal structure was fabricated by etching and sputtering methods. The fabricated structure shows a high tunable emittance behavior with emittance increment reaching 0.41. Both the experiment and simulation identified that the microcavity beneath thermochromic film can improve its thermochromic performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermal Radiation and Cooling Technologies · Optical Coatings and Gratings · Metamaterials and Metasurfaces Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Radiative and optical properties of La1−xSrxMnO3 (0<x<0.4) in the vicinity of metal-insulator transition temperatures from 173 to 413K10.1023/A:1012813625195 ↗
2. Temperature dependence of total hemispherical emittance in perovskite-type manganese oxides, La1−xSrxMnO310.1068/htwu129 ↗
3. Development of a variable emittance radiator based on a perovskite manganese oxide10.2514/2.6760 ↗
4. Variable thermal emittance radiator using metal-insulator phase transition in La1−xSrxMnO310.1143/JJAP.41.7263 ↗
5. Temperature-dependent infrared properties of Ca doped (La,Sr)MnO3 compositions with potential thermal control application10.1016/j.applthermaleng.2012.07.046 ↗
6. The thermochromic properties of La1−xSrxMnO3 compounds10.1016/j.solmat.2008.05.001 ↗
7. Development of spectral selective multilayer film for a variable emittance device and its radiation properties measurements10.1023/A:1024044417708 ↗
8. Computational design of solar reflection and far-infrared transmission films for a variable emittance device10.1364/AO.42.001360 ↗
9. Tailoring the solar absorptivity of thermochromic material La0.7Ca0.2Sr0.1MnO310.1016/j.jqsrt.2011.08.007 ↗
10. Radiative properties of thermochromic material with solar reflection films10.1016/j.solmat.2013.01.018 ↗
11. Degradation of thermal radiative properties of variable emissivity device based on manganese oxides in simulated space environment10.1016/j.ijthermalsci.2013.04.002 ↗
12. Narrow band thermal radiation with low directivity by resonant modes inside tungsten microcavities10.1143/JJAP.43.5253 ↗
13. Influence of grain size on magnetic and transport properties of polycrystalline La0.8Sr0.2MnO3 manganites10.1016/j.jallcom.2006.10.078 ↗
14. Tuning of colossal magnetoresistance via grain size change in La0.67Ca0.33MnO310.1063/1.371303 ↗
15. Spatial and temporal coherence of thermal radiation in asymmetric Fabry–Perot resonance cavities10.1016/j.ijheatmasstransfer.2009.01.042 ↗
16. High-temperature resistive surface grating for spectral control of thermal radiation10.1063/1.1560867 ↗
17. Thickness dependence of surface plasmon polariton dispersion in transparent conducting oxide films at 1.55μm10.1364/OL.34.000839 ↗
18. Broadband light absorption enhancement in thin-film silicon solar cells10.1021/nl904057p ↗
19. Semiconductor thin films combined with metallic grating for selective improvement of thermal radiative absorption/emission10.1115/1.3056599 ↗
20. Photonic crystal vertical-cavity surface-emitting lasers with true photonic bandgap10.1364/OL.35.000829 ↗
21. Investigation on emissive properties of peroskite-type oxide lsmo with grating surface10.1007/s11431-010-4202-2 ↗
22. Investigation on the coupling effect of thermochromism and microstructure on spectral properties of structured surfaces10.1016/j.apsusc.2012.04.015 ↗
23. Perovskite-type oxide films combined with gratings for reduction of material consumption and improvement of thermochromism property10.1016/j.jqsrt.2011.07.012 ↗
24. An overview of micro/nanoscaled thermal radiation and its applications10.1016/j.photonics.2014.02.003 ↗
25. Stable implementation of the rigorous coupled-wave analysis for surface-relief gratings10.1364/JOSAA.12.001077 ↗
26. Spectral features of an omnidirectional narrowband emitter10.1115/1.4006156 ↗
27. Siegel · 1992
28. Relevancy of phase separation between electrical and thermal properties in La0.8Sr0.2MnO3 thin films10.1016/j.physb.2011.02.048 ↗
29. Thermal emittance changes at the charge ordering transition of Sm0.35Ca0.65MnO310.1063/1.2999372 ↗
30. Thermochromic effect at room temperature of Sm0.5Ca0.5MnO3 thin films10.1063/1.4722264 ↗
31. Frequency shifts of the internal phonon modes in La0.7Ca0.3MnO310.1103/PhysRevLett.77.1877 ↗
32. Optical study of electronic structure in perovskite-type RMO3 (R=La,Y; M=Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu)10.1143/JPSJ.64.2488 ↗
33. Thermal radiation from two-dimensionally confined modes in microcavities10.1063/1.1397759 ↗
34. Measurement and modeling of the emittance of silicon wafers with anisotropic roughness10.1007/s10765-007-0192-0 ↗
35. Influence of microroughness on emissivity10.1063/1.1776634 ↗
36. Interaction between the d-shells in the transition metals. II. Ferromagnetic compounds of manganese with perovskite structure10.1103/PhysRev.82.403 ↗