journal article·2015-05

Damage-free ultraviolet nanosecond laser ablation for high efficiency back contact solar cell fabrication

Daniel Walter, Andreas Fell, Evan Franklin, Da Wang, Kean Fong, Teng Kho, Klaus Weber, Andrew W. Blakers

Publisher page

Abstract

Selective laser ablation of dielectric films for local contact formation is an attractive process simplification for high efficiency silicon solar cell fabrication. In high efficiency applications, the goal of laser ablation is spatially selective removal of surface dielectric layer(s) with minimal modification to the electronic properties of the substrate, equivalent to the performance benchmark set by photolithography processing. In this work, we present detailed characterisation of direct, 248 nm, nanosecond laser ablation of a Si3N4/SiO2 dielectric stack for rear contact openings in a high efficiency interdigitated back contact solar cell. The efficacy of the ablation process is determined by the influence of the laser irradiation on three properties of the ablated region: pre-existing near surface dopant profiles, recombination activity, and the resistivity of the contact formed through the ablated opening. It is found that sufficient optical attenuation occurs in the Si3N4 layer at 248 nm to perform direct ablation. Despite visual evidence of near surface silicon melt formation, there is no measurable change in dopant distribution. Furthermore, we show that there is no increase in recombination activity beyond that expected for the underlying diffused and unpassivated surface, and contact resistivity below 0.1 mΩ cm2 is achieved for vacuum evaporated aluminium on boron-diffused silicon. Back contact solar cells processed with laser ablated contact openings demonstrate conversion efficiencies equivalent to photolithography processed controls. An independently verified small-area device efficiency of 23.5% with an open-circuit voltage of 696 mV is achieved, a record efficiency for a laser processed crystalline silicon solar cell.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. 22.8% efficient silicon solar cell10.1063/1.101596 ↗
2. Twenty-four percent efficient silicon solar cells with double layer antireflection coatings and reduced resistance loss10.1063/1.114124 ↗
3. Point-contact silicon solar cells10.1109/T-ED.1984.21586 ↗
4. Laser induced defects in laser doped solar cells10.1002/pip.1043 ↗
5. Industrially feasible rear passivation and contacting scheme for high-efficiency n-type solar cells yielding a Voc of 700mV10.1109/TED.2010.2051194 ↗
6. Selective laser ablation of SiNx layers on textured surfaces for low temperature front side metallizations10.1002/pip.856 ↗
7. Towards 20% efficient large-area screen-printed rear-passivated silicon solar cells10.1002/pip.1198 ↗
8. J.R. Horzel, P. Choulat, E. Cornagliotti, T. Janssens, J. John, I. Kuzma Filipek, V. Prajapati, A. Rothschild, R. Russell, S. Singh, Overview on recent improvement for industrially applicable PERL-type Si solar cell processing, in: Proceedings of the 27th European Photovoltaic Solar Energy Conference and Exhibition-EUPVSEC, 2012, pp. 1602–1606.
9. 21.2%-efficient fineline-printed PERC solar cell with 5 busbar front grid10.1002/pssr.201409190 ↗
10. J. Benick, B. Steinhauser, R. Muller, J. Bartsch, M. Kamp, A. Mondon, A. Richter, M. Hermle, S. Glunz, High efficiency n-type PERT and PERL solar cells, in: Proceedings of the 40th IEEE Photovoltaic Specialist Conference (PVSC), 2014, pp. 3637–3640.10.1109/PVSC.2014.6924895 ↗
11. Design, fabrication and characterisation of a 24.4% efficient interdigitated back contact solar cell
12. Bäuerle · 2000
13. Laser induced lifetime degradation in p-type crystalline silicon10.1063/1.4725191 ↗
14. Laser annealing of ion-implanted semiconductors10.1126/science.204.4392.461 ↗
15. The influence of thermal effects and dielectric films on the electronic quality of p+-doped silicon processed by nanosecond laser10.1109/JPHOTOV.2014.2330416 ↗
16. Laser ablation of SiO2 for locally contacted Si solar cells with ultra-short pulses10.1002/pip.758 ↗
17. A. Knorz, M. Aleman, A. Grohe, R. Preu, S.W. Glunz, Laser ablation of antireflection coatings for plated contacts yielding solar cell efficiencies above 20%, in: Proceedings of the 24th European PV Solar Energy Conference and Exhibition, Hamburg, 2009.
18. Increased front surface recombination by rear-side laser processing on thin silicon solar cells10.1109/JPHOTOV.2013.2261573 ↗
19. Enhancement of laser-induced rear surface spallation by pyramid textured structures on silicon wafer solar cells10.1364/OE.20.00A984 ↗
20. Modeling photocurrent action spectra of photovoltaic devices based on organic thin films10.1063/1.370757 ↗
21. A free and fast three-dimensional/two-dimensional solar cell simulator featuring conductive boundary and quasi-neutrality approximations10.1109/TED.2012.2231415 ↗
22. Determination of injection dependent recombination properties of locally processed surface regions10.1016/j.egypro.2013.07.245 ↗
23. The impact of silicon CCD photon spread on quantitative analyses of luminescence images10.1109/JPHOTOV.2013.2287912 ↗
24. Improved diffused-region recombination-current pre-factor analysis10.1016/j.egypro.2014.08.100 ↗
25. D. Kane, R. Swanson, Measurement of the emitter saturation current by a contactless photoconductivity decay method, in: Proceedings of the IEEE Photovoltaic Specialists Conference, vol. 18, 1985, pp. 578–583.
26. Pulsed laser techniques for solar cell processing10.1109/T-ED.1980.19940 ↗
27. Fast simulation code for heating, phase changes and dopant diffusion in silicon laser processing using the alternating direction explicit (ADE) method10.1007/s00339-009-5416-7 ↗
28. Laser doping strategies using SiN:P and SiN:B dielectric layers for profile engineering in high efficiency solar cell10.1016/j.egypro.2012.07.092 ↗
29. Optimised antireflection coatings using silicon nitride on textured silicon surfaces based on measurements and multidimensional modelling10.1016/j.egypro.2012.02.009 ↗
30. Optical properties of intrinsic silicon at 300K10.1002/pip.4670030303 ↗
31. Palik · 1998