The effect of damp heat-illumination exposure on CIGS solar cells: A combined XRD and electrical characterization study
Source abstract
Abstract
Unencapsulated CIGS solar cells were simultaneously exposed to damp heat and illumination. In-situ monitoring of their electrical parameters demonstrated a rapid decrease of the efficiency, mainly driven by changes in the series and shunt resistances. The non-degraded and degraded solar cells were studied by SIMS and XRD to investigate the material changes leading to efficiency loss. SIMS showed the migration of sodium and potassium, likely leading to changes in the shunt resistance and output voltage. Extensive XRD measurements showed that molybdenum oxide was formed and that the in-plane stress in the ZnO:Al film increased. The stress increase is most likely due to the incorporation of species like hydroxide in the grain boundaries. These phenomena could lead to the observed increased series resistance in the solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Life prediction for CIGS solar modules part 1: modelling moisture ingress and degradation10.1002/pip.1172 ↗
2. J. Del Cueto, S. Rummel, B., Kroposki, C. Osterwald, A. Anderberg, Stability of CIS/CIGS modules at the outdoor test facility over two decades, in: Proceedings of the 33rd IEEE PVSC, 2008, pp. 1–610.1109/PVSC.2008.4922772 ↗
3. Physical and chemical degradation behavior of sputtered aluminum doped zinc oxide layers, for Cu(In,Ga)Se2 solar cells10.1016/j.tsf.2013.10.149 ↗
4. Failure analysis of Cu(In,Ga)Se2 photovoltaic modules: degradation mechanism of Cu(In,Ga)Se2 solar cells under harsh environmental conditions10.1002/pip.2497 ↗
5. The impact of sodium and potassium on the degradation of CIGS solar cells10.1002/pip.2610 ↗
6. M. Theelen, N. Barreau, H. Steijvers, V. Hans, Z. Vroon, M. Zeman, Degradation of CIGS solar cells due to the migration of alkali elements, in: Proceedings of the 42th IEEE PVSC, 2015, pp. 1–610.1109/PVSC.2015.7355776 ↗
7. Influence of deposition pressure and selenisation on damp heat degradation of the Cu(In,Ga)Se2 back contact molybdenum10.1016/j.surfcoat.2014.05.001 ↗
8. Influence of Mo/MoSe2 microstructure on the damp heat stability of the Cu(In,Ga)Se2 back contact molybdenum10.1016/j.tsf.2016.06.028 ↗
9. Accelerated performance degradation of CIGS solar cell determined by in-situ monitoring
10. Re-investigation of preferential orientation of Cu(In,Ga)Se2 thin films grown by the three-stage process10.1002/pip.1079 ↗
11. Hyperphysics Relative Humidity 〈http://hyperphysics.phy-astr.gsu.edu/hbase/kinetic/relhum.html〉 (accessed 18.11.14)
12. Noyan · 1987 · 117
13. M. Theelen, A. Liakopoulou, F. Daume, V. Hans, H. Steijvers, N. Barreau, M. Tomassini, Z. Vroon, M. Zeman, Temperature Dependency of CIGS Solar Cells on Soda Lime Glass and Polyimide: A Comparison, 2016 (in preparation).
14. C. Kaufmann, D. Greiner, H. Rodriguez-Alvarez, A. Weber, M. Heinemann, J. Lauche, M. Klaus, C. Genzel, H. Schock, R. Mainz, Co-evaporation of Cu(In,Ga)Se2 at low temperatures: an in-situ x-ray growth analysis, in: Proceedings of the 39th IEEE PVSC, 2013, pp. 3058–306110.1109/PVSC.2013.6745106 ↗
15. Real-time investigations on the formation of Cu(In,Ga)(S,Se)2 while annealing Cu–In–Ga precursors with different sulphur–selenium mixtures10.1016/j.tsf.2012.11.059 ↗
16. High-efficiency Cu(In,Ga)Se2 cells and modules10.1016/j.solmat.2013.05.002 ↗
17. F. Karg, V. Probst, H. Harms, J. Rimmasch, W. Riedl, J. Kotschy, J. Holz, R. Treichler, O. Eibl, A. Mitwalsky, A. Kiendl, Novel rapid-thermal-processing for CIS thin-film solar cells, in: Proceedings of the 23rd IEEE PVSC, 1993, pp. 441–44610.1109/PVSC.1993.347141 ↗
18. Influence of RF power on magnetron sputtered AZO films
19. Structural, electrical, and optical properties of transparent conductive oxide ZnO:Al films prepared by dc magnetron reactive sputtering10.1116/1.1368836 ↗
20. Properties of textured ZnO:Al Films prepared by RF magnetron sputtering for thin film solar cells
21. Influence of thickness and annealing temperature on the electrical, optical and structural properties of AZO thin films10.1016/j.vacuum.2012.02.040 ↗
22. Effects of deposition power and pressure on the crystallinity of Al-doped ZnO thin films at glass substrates by low temperature RF magnetron sputtering
23. Transparent ZnO thin-film transistor fabricated by rf magnetron sputtering10.1063/1.1553997 ↗
24. Structural, electrical and optical properties of aluminum doped zinc oxide films prepared by radio frequency magnetron sputtering10.1063/1.365556 ↗
25. Structural, optical, and electrical properties of (Zn,Al)O films over a wide range of compositions10.1063/1.2357638 ↗
26. Effect of substrate-induced strain on the structural, electrical, and optical properties of polycrystalline ZnO thin films10.1063/1.1769598 ↗
27. Durability of doped zinc oxide/silver/doped zinc oxide low emissivity coatings in humid environment10.1016/j.tsf.2007.06.028 ↗
28. ICDD JCPDS cards 00-042-1120 (body centred cubic molybdenum), 00–062-0710 (tetragonal Cu(In,Ga)Se2), 01-089-1397 (hexagonal ZnO), 00-021-0569 (orthorhombic, MoO3), 00-039-1089 (Na0.9Mo2O4)
29. Review of progress toward 20% efficiency flexible CIGS solar cells and manufacturing issues of solar modules10.1109/JPHOTOV.2012.2226869 ↗
30. The thermal and elastic properties of zinc oxide-based ceramics at high temperatures
31. Internal stress in titanium, nickel, and tantalum films deposited by cylindrical magnetron sputtering10.1116/1.569113 ↗
32. In situ measurement of mechanical stress in polycrystalline zinc-oxide thin films prepared by magnetron sputtering10.1063/1.1288162 ↗
33. Lattice dynamics and hyperfine interactions in ZnO and ZnSe at high external pressures10.1103/PhysRevB.53.11425 ↗
34. Effects of aluminium doping on structural and photoluminescence properties of ZnO nanoparticles10.1016/j.ceramint.2013.08.055 ↗
35. Low temperature synthesis and NOx sensing properties of nanostructured Al-doped ZnO10.1016/j.snb.2007.03.019 ↗
36. Atomic layer deposition of Al-doped ZnO films: effect of grain orientation on conductivity10.1021/cm101227h ↗
37. M. Theelen, Degradation of CIGS Solar Cells. 〈www.cigsdegradation.com〉, Ipskamp Drukkers, 2015, pp. 225–227
38. A comprehensive characterization of the interfaces in Mo/CIS/CdS/ZnO solar cell structures10.1016/0927-0248(95)00107-7 ↗
39. Degradation of ZnO window layers for CIGS by damp-heat exposure10.1117/12.795097 ↗
40. Influence of damp heat on the optical and electrical properties of Al-doped zinc oxide10.1016/j.tsf.2008.10.107 ↗
41. Noyan · 1987 · 117
42. Smithells Metals Reference Book, 5th ed., 1976, pp. 975–980