Red and near-infrared absorption enhancement for low bandgap polymer solar cells by combining the optical microcavity and optical spacers
Source abstract
Abstract
Abstract Metal-mirror microcavity (MMC) structure is incorporated into the low bandgap polymer solar cells (LBPSCs) by sandwiching the active layer between the semitransparent Ag electrode and top Ag electrode. Optical simulations demonstrate that significant absorption enhancement can be achieved in the red and near infrared (near-IR) wavelength range due to the large optical electric field confined by the MMC structure. By inserting optical spacers to control the spectral and spatial distribution of the electric field in the LBPSC devices, the MMC structure can improve the total absorbed photons (TAPs) at the red and near-IR spectral range (620–900 nm) by 42.6% and yield an improvement of 14.0% in TAPs across the whole spectrum (400–900 nm) for the device with a 100 nm-thick active layer. For devices with thinner active layer, the improving rate is significantly raised to over 100%. Additionally, it is revealed that the effects of the optical spacers on the electric field distribution vary with their positions in the MMC structure. Finally, the MMC-based devices are optimized by tailoring the electric field distribution in the devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Y. Liang, Z. Xu, J. Xia, S. Tsai, Y. Wu, G. Li, C. Ray, and L. Yu, For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%, Adv. Mater. 22 (2010) E135–E138.10.1002/adma.200903528 ↗
2. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
3. Low band gap polymers for roll-to-roll coated polymer solar cells10.1021/ma1015903 ↗
4. Aqueous processing of low-band-gap polymer solar cells using roll-to-roll methods10.1021/nn200933r ↗
5. Efficient, air-Stable bulk heterojunction polymer solar cells using MoOx as the anode interfacial layer10.1002/adma.201100038 ↗
6. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
7. Recombination-limited photocurrents in low bandgap polymer/fullerene solar cells10.1002/adfm.200801514 ↗
8. Intrinsic absorption of plasmonic structures for organic solar cells10.1016/j.solmat.2010.12.045 ↗
9. Plasmonic-enhanced polymer photovoltaic devices incorporating solution-processable metal nanoparticles10.1063/1.3174914 ↗
10. Titanium suboxide as an optical spacer in polymer solar cells10.1063/1.3159622 ↗
11. An inverted organic solar cell with an ultrathin Ca electron-transporting layer and MoO3 hole-transporting layer10.1063/1.3250176 ↗
12. Investigation of optical spacer layers from solution based precursors for polymer solar cells using X-ray reflectometry10.1016/j.optmat.2008.11.014 ↗
13. Broadband optical absorption enhancement through coherent light trapping in thin-film photovoltaic cells,10.1364/OE.16.005385 ↗
14. Improving optical performance of inverted organic solar cells by microcavity effect10.1063/1.3262967 ↗
15. Enhanced optical field intensity distribution in organic photovoltaic devices using external coatings10.1063/1.2399937 ↗
16. Towards efficient tin-doped indium oxide (ITO)-free inverted organic solar cells using metal cathodes10.1063/1.3059552 ↗
17. Enhancement of the short circuit current in organic photovoltaic devices with microcavity structures10.1063/1.3480612 ↗
18. Improving optical performance of low bandgap polymer solar cells by the two-mode moderate microcavity10.1063/1.3541960 ↗
19. Optical optimization of polyfluorene-fullerene blend photodiodes10.1063/1.1836005 ↗
20. Minimizing optical losses in bulk-heterojunction polymer solar cells10.1007/s00340-006-2542-1 ↗
21. Effects of metal electrode reflection and layer thicknesses on the performance of inverted organic solar cells10.1016/j.solmat.2009.12.017 ↗
22. Design of efficient organic tandem cells: on the interplay between molecular absorption and layer sequence10.1063/1.2825651 ↗
23. Optical constants of conjungated polymer/fullerene based bulk-heterojunction organic solar cells10.1080/713738799 ↗
24. Optical properties of epitaxially grown zinc oxide films on sapphire by pulsed laser deposition10.1063/1.370744 ↗
25. Optical characterization of MoO3 thin films produced by continuous wave CO2 laser-assisted evaporation10.1016/j.tsf.2004.10.027 ↗
26. Palik · 1998
27. Resonant cavity-enhanced (RCE) photodetectors10.1109/3.83412 ↗
28. Resonant cavity enhanced photonic devices10.1063/1.360322 ↗
29. Measurement of the phase shift upon reflection from photonic crystals10.1063/1.1905812 ↗
30. Efficient light harvesting in multiple-device stacked structure for polymer solar cells
31. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
32. High-efficiency polymer tandem solar cells with three-terminal structure10.1002/adma.200902750 ↗
33. Optimizing polymer tandem solar cells10.1002/adma.200902398 ↗
34. Performance improvement of inverted polymer solar cells with different top electrodes by introducing a MoO3 buffer layer