journal article·2014-08

Soft and flexible Interpenetrating Polymer Networks hosting electroreflective poly(3,4-ethylenedioxythiophene)

Laurent J. Goujon, Pierre-Henri Aubert, Laurent Sauques, Frédéric Vidal, Dominique Teyssié, Claude Chevrot

Publisher page

Abstract

Abstract In this paper, we designed a flexible electroreflective device (ERD) with tunable optical properties in the near and mid infrared spectra. The ERD is made of a poly(3,4-ethylenedioxythiophene) (PEDOT) layer interpenetrated in a soft and flexible nitrile butadiene rubber (NBR)/polyethylene oxide (PEO) interpenetrating polymer network (IPN). The composition, structure and infrared properties of the semi-IPN were optimized according to the polymerization time of the EDOT monomer within the IPN. After the addition of an ionic liquid (IL), namely N-ethylmethylimidazolium bis(trifluoromethanesulfonyl)imide (EMITFSI), assuming the ionic conductivity of the system, the device exhibits middle infrared and tunable optical properties between 2 µm and 20 µm upon electrical switching between −1.5 V and +1.5 V. The modulation of the reflectivity in bands II (3–5 µm) and III (8–12 µm) regions is 26% and 41% respectively. Due to the presence of the soft NBR network, both IPN and ERD reveal improved mechanical properties compare to the single network and the ERD-only based on PEO. For instance, ERDs made with PEO/PEDOT semi-IPN possesses an elongation at break below 10%, for a stress at break lower than 1.4 MPa, while ERDs containing NBR show elongations at break from 45% to 15% for stresses at break from 3 to 8 MPa, depending on the amount of incorporated PEDOT. In parallel, the NBR/PEO/PEDOT devices showed robust and flexible behavior.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. T.A. Skotheim, R.L. Elsenbaumer, J.R. Reynolds, Handbook of Conducting Polymers, 3rd ed., New York, 2007.10.1201/b12346 ↗
2. Color control in pi-conjugated organic polymers for use in electrochromic devices10.1021/cr900129a ↗
3. Flexible electrochromic reflectance device based on tungsten oxide for infrared emissivity control10.1063/1.1430543 ↗
5. Infrared reflectance modulation in tungsten oxide based electrochromic devices10.1016/S0013-4686(01)00374-7 ↗
6. Microporous patterned electrodes for color-matched electrochromic polymer displays10.1021/cm049951s ↗
7. A poly(3,4-alkylenedioxythiophene) electrochromic variable optical attenuator with near-infrared reflectivity tuned independently of the visible region10.1002/adfm.200601145 ↗
8. Far-IR transparency and dynamic infrared signature control with novel conducting polymer systems
9. Wide band electrochromic displays based on thin conducting polymer films10.1016/S0013-4686(01)00392-9 ↗
10. Combined visible and infrared electrochromism using dual polymer devices10.1002/1521-4095(200105)13:9<634::AID-ADMA634>3.0.CO;2-3 ↗
11. Large, switchable electrochromism in the visible through far-infrared in conducting polymer devices10.1002/1616-3028(20020201)12:2<95::AID-ADFM95>3.0.CO;2-N ↗
12. Multicolored electrochromism polymers: structures and devices10.1021/cm049669l ↗
13. 1991
14. Self-supported semi-interpenetrating polymer networks for new design of electrochromic devices10.1016/j.electacta.2007.12.087 ↗
15. Symmetrical electrochromic device from poly(3,4-(2,2-dimethylpropylenedioxy)thiophene)-based semi-interpenetrating polymer network10.1016/j.synthmet.2012.08.006 ↗
16. New prospects in the conception of IR electro-tunable devices: the use of conducting semi-interpenetrating polymer network architecture10.1021/cm100736y ↗
17. Flexible solid polymer electrolytes based on nitrile butadiene rubber/poly(ethylene oxide) interpenetrating polymer networks containing either LiTFSI or EMITFSI10.1021/ma201662h ↗
18. Polyethylene oxide–polytetrahydrofurane–PEDOT conducting interpenetrating polymer networks for high speed actuators10.1088/0964-1726/20/12/124002 ↗
19. Electropolymerization of 3,4-ethylenedioxythiophene within an insulating nitrile butadiene rubber network: application to electroreflective surfaces and devices10.1016/j.solmat.2011.07.004 ↗
20. Indium tin oxide plasma frequency dependence on sheet resistance and surface adlayers determined by reflectance FTIR spectroscopy10.1021/jp026600x ↗
21. Tuning plasma frequency for improved solar control glazing using mesoporous nanostructures
22. Reflectance of conducting poly(3,4-ethylenedioxythiophene)10.1016/S0379-6779(99)00095-8 ↗
23. Evolution of the conducting state of polyaniline from localized to mesoscopic metallic to intrinsic metallic regimes10.1016/0379-6779(94)02438-5 ↗
24. Metallic conductivity of highly doped poly(3,4-ethylenedioxythiophene)10.1016/S0379-6779(98)00758-9 ↗
25. Tezuka · Synth. Met. · 1989 · 30 · 36910.1016/0379-6779(89)90660-7 ↗
26. Tezuka · J. Electroanal. Chem. · 1995 · 385 · 5110.1016/0022-0728(95)04100-3 ↗
27. Tezuka · J. Electroanal. Chem. · 1997 · 425 · 16710.1016/S0022-0728(96)04952-2 ↗
28. Moving front phenomena in the switching of conductive polymers10.1016/S0022-0728(97)00561-5 ↗
29. Influence of the local electric field on ionic transport during redox switching of conducting polymers10.1016/S0301-0104(00)00073-2 ↗
30. Development of a model for charge transport in conjugated polymers10.1021/jp802941m ↗
31. Visualizing ion currents in conjugated polymers10.1002/adma.200400188 ↗
32. X.Z. Wang, E. Smela, B. Shapiro, Understanding ion transport in conjugated polymers, in: Y. BarCohen (Ed.), Smart Structures and Materials 2004: Electroactive Polymer Actuators and Devices, 2004, pp. 146–154.10.1117/12.541546 ↗
33. Electrochemical switching of conducting polymers: a variable resistance transmission line model10.1016/j.jelechem.2006.02.026 ↗
34. Moving redox fronts in conjugated polymers studies from lateral electrochemistry in polythiophenes10.1149/1.1649749 ↗
35. Nucleation and nonstoichiometry in electrochromic conducting polymers10.1002/cphc.200300640 ↗
36. Synthesis and characterization of conducting interpenetrating polymer networks for new actuators10.1016/j.polymer.2005.03.103 ↗
37. Robust solid polymer electrolyte for conducting IPN actuators10.1088/0964-1726/22/10/104005 ↗