journal article·2010-03

Azide-induced crosslinking of electrolytes and its application in solid-state dye-sensitized solar cells

Joo Hwan Koh, Jong Kwan Koh, Nam-Gyu Park, Jong Hak Kim

Publisher page

Abstract

Abstract Poly(ethylene glycol) containing terminal azide groups, i.e. PEG-N 3 , was synthesized by reacting poly(ethylene glycol diglycidyl ether) (PEGDGE) with NaN 3 , as confirmed by 1 H NMR and FT-IR spectroscopy. The resultant PEG-N 3 was complexed with LiI or ionic liquid (1-methyl-3-propylimidazolium iodide, MPII) and then crosslinked under UV irradiation to enhance the mechanical properties of the electrolytes. The ionic conductivity of electrolytes with MPII reached 1.6×10 −5 S/cm at 25 °C, which is ten-fold higher than that of electrolytes with LI (1.5×10 −6 S/cm), due to different chain mobility. A worm-like morphology of the TiO 2 nanoporous layer was observed in the FE-SEM micrographs, which resulted from the interfacial contact between the TiO 2 nanoparticles and the electrolytes. Dye-sensitized solar cells (DSSCs) employing electrolytes with MPII and LiI exhibited an energy conversion efficiency at 100 mW/cm 2 of 1.6% and 0.8%, respectively. Solar cell performances were further improved by up to 4.2% with careful optimization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Advanced Nanomaterials in Catalysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Crystal structures of poly(ethylene oxide)3:LiBF4 and (diglyme)n:LiBF4 (n=1,2)10.1021/cm048310u ↗
2. Influence of the phosphoric acid-doping level in a polybenzimidazole membrane on the cell performance of high-temperature proton exchange membrane fuel cells10.1016/j.jpowsour.2008.12.115 ↗
3. Revelation of facilitated olefin transport through silver-polymer complex membranes using anion complexation10.1021/ma0340210 ↗
4. Influence of doped anions on poly(3,4-ethylenedioxythiophene) as hole conductors for iodine-free solid-state dye-sensitized solar cells10.1021/ja075704o ↗
5. Electron transport analysis for improvement of solid-state dye-sensitized solar cells using poly(3,4-ethylenedioxythiophene) as hole conductors10.1021/jp064439a ↗
6. Quasi-solid dye sensitised solar cells filled with phase-separated chemically cross-linked ionic gels10.1039/b302793g ↗
7. The role of gel electrolyte composition in the kinetics and performance of dye-sensitized solar cells10.1016/j.electacta.2008.05.009 ↗
8. Dye-sensitized solar cells based on TiO2 nanotubes and a solid-state electrolyte10.1016/j.jphotochem.2007.01.023 ↗
9. Enhancement of photocurrent generation and open circuit voltage in dye-sensitized solar cells using Li+ trapping species in the gel electrolyte10.1039/b717278h ↗
10. Ionic conductance of gel electrolyte using a polyurethane matrix for rechargeable lithium batteries10.1016/j.electacta.2004.01.128 ↗
11. Polymeric gel electrolytes using a network matrix with carbonyl groups for rechargeable lithium batteries10.1016/S0167-2738(02)00295-3 ↗
12. Investigating the effect of miscibility on the ionic conductivity of LiClO4/PEO/PCL ternary blends10.1021/ma0488156 ↗
13. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
14. Solar energy conversion by dye-sensitized photovoltaic cells10.1021/ic0508371 ↗
15. SeCN−/(SeCN)3− Based Ionic Liquid Electrolyte for High-Efficiency Dye-Sensitized Nanocrystalline Solar Cells10.1021/ja048472r ↗
16. The application of room temperature molten salt with low viscosity to the electrolyte for dye-sensitized solar cell10.1246/cl.2001.26 ↗
17. Solid-state dye-sensitized solar cell with p-type NiO as a hole collector10.1016/j.solmat.2004.05.010 ↗
18. Latent gel electrolyte precursors for quasi-solid dye sensitized solar cells: the comparison of nano-particle cross-linkers with polymer cross-linkers10.1016/j.jphotochem.2005.07.010 ↗
19. Quasi-solid-state dye-sensitized solar cells: Pt and PEDOT:PSS counter electrodes applied to gel electrolyte assemblies10.1016/j.jphotochem.2006.11.008 ↗
20. Quasi-solid-state dye-sensitized solar cells with cyanoacrylate as electrolyte matrix10.1016/j.solmat.2007.03.002 ↗
21. Optimizations of large area quasi-solid-state dye-sensitized solar cells10.1016/j.solmat.2006.02.012 ↗
22. Solid-state dye-sensitized solar cell: improved performance and stability using a plasticized polymer electrolyte10.1016/j.jphotochem.2005.11.028 ↗
24. Measurements of photocurrent and voltage in dye-sensitized solar cells: application for highly viscous electrolyte systems10.1021/la051257j ↗
25. Supramolecular electrolytes for use in highly efficient dye-sensitized solar cells10.1002/adma.200306664 ↗
26. Dye-sensitized nanocrystalline solar cells based on composite polymer electrolytes containing fumed silica nanoparticles10.1039/b405215c ↗
27. Oligomer approaches for solid-state dye-sensitized solar cells employing polymer electrolytes10.1021/jp067621k ↗
28. Azides: their preparation and synthetic uses10.1021/cr00084a001 ↗
29. Efficient metal salt catalyzed azidolysis of epoxides with sodium azide in acetonitrile10.1016/S0040-4039(00)97921-8 ↗
30. Graft copolymers by a combination of ATRP and two different consecutive click reactions10.1021/ma070705m ↗
31. Proton conducting poly(vinylidene fluoride-co-chlorotrifluoroethylene) graft copolymer electrolyte membranes10.1016/j.memsci.2008.01.015 ↗
32. Covalent immobilization of chitosan/heparin complex with a photosensitive hetero-bifunctional crosslinking reagent on PLA surface10.1016/S0142-9612(02)00215-6 ↗
33. “PolyMOB”–lithium salt complexes: from salt-in-polymer to polymer-in-salt electrolytes10.1016/S0013-4686(03)00183-X ↗
34. Characterization of poly(vinylidene fluoride–hexafluoropropylene) (PVdF–HFP) electrolytes complexed with different lithium salts10.1016/j.eurpolymj.2004.09.001 ↗
35. Li-ion conduction of plasticized PVA solid polymer electrolytes complexed with various lithium salts10.1016/j.ssi.2004.01.020 ↗