journal article·2026-04Open access

Performance enhancement of single-stage pulsed hybrid reactive magnetron sputtered Cu(In,Ga)Se2 solar cells via sodium pre-deposition treatment

Neha Kumari, Devaraj Ramasamy, Jitendra Kumar, Neslihan Akcay, Pedro Sousa, Nicoleta Nicoara, Pedro Anacleto, Sascha Sadewasser

Abstract

We report the performance enhancement of single-stage grown Cu(In,Ga)Se 2 (CIGS) solar cells using a simple and scalable solution-processed sodium (Na) pre-deposition treatment. Na was incorporated via spin-coating of aqueous NaOH solutions with varying concentrations prior to CIGS growth by pulsed hybrid reactive magnetron sputtering (PHRMS). Morphology analysis revealed smoother surfaces and rounded grain edges with Na addition. Atomic force microscopy confirmed a reduction in surface roughness with Na incorporation. Kelvin probe force microscopy revealed a decrease in work function for Na-treated CIGS, indicating a Fermi level shift toward the conduction band, potentially reducing recombination by suppressing deep-level defects. The highest power conversion efficiency of 14.3 % was achieved for a 0.05 M Na-treated CIGS solar cell, compared to 10.1 % for the reference (untreated) device. At higher Na concentrations (1 M), the efficiency dropped to 10.8 %. These results underscore the effectiveness of controlled Na pre-deposition in enhancing single-stage PHRMS-grown CIGS solar cell performance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Dielectric function of Cu(In,Ga)Se2-based polycrystalline materials10.1063/1.4790174 ↗
2. High-concentration silver alloying and steep back-contact gallium grading enabling copper indium gallium selenide solar cell with 23.6% efficiency10.1038/s41560-024-01472-3 ↗
3. Solar cell efficiency tables (Version 65)10.1002/pip.3867 ↗
4. Tabulated values of the Shockley–queisser limit for single junction solar cells10.1016/j.solener.2016.02.015 ↗
5. Voids and compositional inhomogeneities in Cu(In,Ga)Se2 thin films: evolution during growth and impact on solar cell performance10.1080/14686996.2018.1536679 ↗
6. Na‐diffusion enhanced p‐type conductivity in Cu(In,Ga)Se2: a new mechanism for efficient doping in semiconductors10.1002/aenm.201601191 ↗
7. Sodium doping of solution-processed amine-thiol based CIGS solar cells by thermal evaporation of NaCl10.1002/pip.3408 ↗
8. Enhancement of solution-processed Cu2ZnSnS4 film properties via a facile approach of sodium incorporation10.1016/j.mssp.2022.106660 ↗
9. Na impurity chemistry in photovoltaic CIGS thin films: investigation with x-ray photoelectron spectroscopy10.1116/1.580902 ↗
10. In-line deposited Cu(In,Ga)Se2 solar cells: influence of deposition temperature and Na co-evaporation on carrier collection10.1016/j.tsf.2003.10.107 ↗
11. Efficiency enhancement of Cu(In,Ga)Se2 solar cells due to post-deposition Na incorporation10.1063/1.1646758 ↗
12. Incorporation of alkali metals in chalcogenide solar cells10.1016/j.solmat.2015.06.011 ↗
13. Alkali metal pretreatment for precise Na doping and voc improvement in CIGS thin-film solar cells10.1021/acsami.4c05100 ↗
14. System for manufacturing complete Cu(In,Ga)Se2 solar cells in situ under vacuum10.1016/j.solener.2020.01.073 ↗
15. Effect of cu-in-ga target composition on hybrid-sputtered Cu(In,Ga)Se2 solar cells
16. Raman spectra of the ordered vacancy compounds CuIn3Se5 and CuGa3Se510.1063/1.121893 ↗
17. Raman investigations of Cu(In,Ga)Se2 thin films with various copper contents10.1016/j.tsf.2008.07.011 ↗
18. Investigation of the diffusion behavior of sodium in Cu(In,Ga)Se2 layers10.1063/1.4871457 ↗
19. The Na-Se (Sodium-Selenium) system10.1007/BF02665704 ↗
20. Properties of Cu2ZnSnS4 films obtained by sulfurization under different sulfur-vapor pressures in a sealed ambient10.1016/j.solener.2021.11.028 ↗
21. A thermodynamical approach to the formation reactions of sodium-doped Cu(In,Ga)Se210.1016/j.tsf.2005.11.081 ↗
22. Real‐time XRD investigations during the formation of Cu(IngGa)Se2 thin films10.1002/ppsc.200501003 ↗
23. XPS studies of sodium compound formation and surface segregation in CIGS thin films
24. Deliberate and accidental gas-phase alkali doping of chalcogenide semiconductors: cu(In,Ga)Se210.1038/srep43266 ↗
25. Direct evidence for grain boundary passivation in Cu(In,Ga)Se2 solar cells through alkali-fluoride post-deposition treatments10.1038/s41467-019-11996-y ↗
26. Unveiling the effects of post-deposition treatment with different alkaline elements on the electronic properties of CIGS thin film solar cells10.1039/c4cp00614c ↗