Evaluation of an innovative liquid barrier layer in laser-structured screens for enhanced solar cell metallization
Source abstract
Abstract
A strategy to further improve the screen-printing process focuses on reducing silver consumption per cell by minimizing the width of the printed electrical contacts by using laser technology to optimize the screen openings. In recent years, laser-structured screens with a polyimide (PI) barrier layer have gained prominence due to their significantly higher lifetime. In this work, we build upon the state-of-the-art by creating a prototype screen comprising of a new liquid photopolymer barrier layer, combined with conventional PI, resulting in a ‘hybrid barrier layer’. The aim of this work was to laser structure a full grid layout on the prototype and determine whether the hybrid barrier layer offers additional benefits, such as narrower fingers with reduced paste spreading. We successfully lasered a busbarless grid layout comprising of 120 fingers onto the prototype screen. This process was completed in just 10 minutes, and the laser-structured screen openings were tapered. For comparison, we used an industry standard screen coated only with PI as a reference. The average printed contact width of the prototype was approximately 23 μm, comparable to the average 21 μm of the reference. Also, a low wet silver laydown of 9 mg was applied to print the front side cell layout. The core widths of the printed fingers were measured to be 18 μm for the prototype and 16 μm for the reference screen. Both screens exhibited paste spreading of 5 μm. These results proves that the prototype is on par with an industry standard screen coated with PI.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Towards sustainable silicon PV manufacturing at the terawatt level
2. Yuan-Chih Chang, Yuchao Zhang, Li Wang, Sisi Wang, Haoran Wang, "Silver‐lean metallization and hybrid contacts via plating on screen‐printed metal for silicon solar cells manufacturing," Progress in Photovoltaics, Wiley, doi: 10.1002/pip.3799.10.1002/pip.3799 ↗
3. Printing technologies for silicon solar cell metallization: a comprehensive review10.1002/pip.3674 ↗
4. Optimization of fine line screen printing using in-depth screen mesh analysis
5. Markus fischer
6. Brave C&H Supply Co., Solar cell printing. [Online]. Available: https://www.bch.com.tw/en/technology-solar_energy.aspx (accessed: 31.01.23).
7. High efficiency silver-free heterojunction silicon solar cell10.1143/JJAP.51.10NA04 ↗
8. Chien · 2013
9. Khanna · 2013
10. Serenelli · 2014
11. Geissbuhler · IEEE J. Photovoltaics · 2014 · 105510.1109/JPHOTOV.2014.2321663 ↗
12. Geissbühler · 2015
13. Descoeudres · 2015
14. Comparison of innovative metallization approaches for silicon heterojunction solar cells10.1016/j.egypro.2017.09.245 ↗
15. Development of nanoparticle copper screen printing pastes for silicon heterojunction solar cells10.1016/j.solener.2019.07.055 ↗
16. J. Schube, T. Fellmeth, M. Jahn, R. Keding, and S. W. Glunz, "Advanced Metallization with Low Silver Consumption for Silicon Heterojunction Solar Cells," p. 20007, doi: 10.1063/1.5125872.10.1063/1.5125872 ↗
17. Donercark · 2020
18. Effect of humidity on optical and electrical properties of Zr-doped In2O3 and a new structure for transparent electrode of silicon heterojunction solar cell10.1016/j.solener.2019.12.017 ↗
19. Nam · 2021
20. Process challenges of high-performance silicon heterojunction solar cells with copper electrodes10.1016/j.solmat.2022.112057 ↗
21. Andreas Lorenz, Timo Wenzel, Sebastian Pingel, Milad Salimi Sabet, Marc Retzlaff, and Florian Clement, "Towards a Cutting‐edge Metallization Process for Silicon Heterojunction Solar Cells with Very Low Silver Laydown,".
22. Progress on the reduction of silver consumption in metallization of silicon heterojunction solar cells10.1016/j.solmat.2023.112620 ↗
23. Fast screen printing and curing process for silicon heterojunction solar cells10.1063/5.0056429 ↗
24. Progress with screen printed metallization of silicon solar cells - towards 20 μm line width and 20 mg silver laydown for PERC front side contacts10.1016/j.solmat.2022.111804 ↗
25. Laser ablation mechanism of silicon nitride with nanosecond and picosecond lasers10.1016/j.optlastec.2019.105644 ↗
26. The link between Ag‐paste rheology and screen‐printed solar cell metallization10.1002/admt.202000654 ↗