journal article·2025-09Open access

Experimental characterization of phase change materials for thermal energy storage for solar energy applications in the temperature range between 400 °C and 600 °C

Franklin R. Martínez, Emiliano Borri, Svetlana Ushak, Saranprabhu Mani Kala, Cristina Prieto, Luisa F. Cabeza

Abstract

Concentrating solar power (CSP) plants are seen as a key technology to achieve the needed energy transition since its use together with a thermal energy storage (TES) system ensures electricity dispatchability decreasing CSP plants environmental impact and life cycle costs. Latent TES using phase change materials (PCMs) has risen as a very interesting storage technology for such applications. Nevertheless, the selection of the adequate TES system and PCM, is one of the problems researchers and practitioners face to implement such technology. This paper presents a full characterization of fifteen PCMs suitable to work in the temperature range 400-600 ◦C. Melting temperature, melting enthalpy, degradation temperature, and solid-state thermal conductivity are presented, complemented with corrosion behaviour tests against stainless steel and Alloy 20. Moreover, the findings obtained in the characterization of the selected fifteen PCMs highlight the need of these analyses, as notable differences were observed compared to the available data, particularly in thermal stability and thermal conductivity. Furthermore, the compatibility test reveals that out of the fifteen selected PCMs, only two PCMs (binary mixtures of carbonates) are potentially compatible with stainless-steel 314 and Alloy 20 fibres under environmental conditions (air atmosphere). Finally, the results presented will allow researchers and practitioners to have very detailed data on the characterisation of those PCMs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Solar Energy Systems and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. 2019
2. The economics of concentrating solar power (CSP): Assessing cost competitiveness and deployment potential10.1016/j.rser.2024.114551 ↗
3. Review of commercial thermal energy storage in concentrated solar power plants: steam vs. molten salts10.1016/j.rser.2017.05.084 ↗
4. Key challenges to expanding renewable energy10.1016/j.enpol.2016.05.034 ↗
5. Comparing carbon capture and storage (CCS) with concentrating solar power (CSP): potentials, costs, risks, and barriers10.1016/j.enpol.2012.05.020 ↗
6. Life cycle assessment (LCA) of a concentrating solar power (CSP) plant in tower configuration with and without thermal energy storage (TES)10.3390/su13073672 ↗
7. Simulation analysis of thermal storage for concentrating solar power10.1016/j.applthermaleng.2011.07.025 ↗
8. Thermal energy storage (TES) with phase change materials (PCM) in solar power plants (CSP). Concept and plant performance10.1016/j.apenergy.2019.113646 ↗
9. PLUSS, (n.d.). https://www.pluss.co.in/knowledge-center/technology/phase-change-materials/(accessed December 16, 2024).
10. Numerical analysis on thermal behavior of cascaded thermal storage units using multichannel flat tubes10.1016/j.est.2024.112142 ↗
11. Use of partial load operating conditions for latent thermal energy storage management10.1016/j.apenergy.2018.02.061 ↗
12. Experimental analysis on improving heat storage efficiency of high-temperature packed bed system using spherical capsules filled with MgCl2–KCl–NaCl/Al2O3 nanoparticles composite phase change material10.1016/j.solmat.2024.113106 ↗
13. Techno-economic optimization of a packed-bed for utility-scale energy storage10.1016/j.applthermaleng.2019.02.134 ↗
14. Thermo-economic optimization of an innovative integration of thermal energy storage and supercritical CO2 cycle using artificial intelligence techniques10.1016/j.psep.2024.04.094 ↗
15. Thermal energy storage using phase change materials in high-temperature industrial applications: multi-criteria selection of the adequate material10.3390/ma17081878 ↗
16. RUBITHERM Phase Change Materials, (n.d.).
17. PCM Products Ltd, https://www.pcmproducts.net/, (n.d.).
18. Croda Industrial Specialties, (n.d.). https://doi.org/Www.Crodaindustrialspecialties.Com/En-Gb.
19. Experimental characterization of phase change materials for thermal energy storage in the temperature range between 270 °C and 400 °C10.1016/j.energy.2024.134243 ↗
20. Long term immersion corrosion tests on metal-PCM pairs used for latent heat storage in the 24 to 29°C temperature range10.1002/maco.200403806 ↗
21. National Center for Biotechnology Information. PubChem Compound Summary for CID 9253, Cyclopentane. PubChem, (n.d.). https://pubchem.ncbi.nlm.nih.gov/compound/Cyclopentane (accessed October 28, 2022).
22. Thermal energy storage for direct steam generation concentrating solar power plants: concept and materials selection10.1016/j.est.2024.110618 ↗
23. Gomez
24. High-temperature phase change materials for thermal energy storage10.1016/j.rser.2009.11.011 ↗
25. A review of phase change materials for vehicle component thermal buffering10.1016/j.apenergy.2013.08.026 ↗
26. Thermal energy storage materials and systems for solar energy applications10.1016/j.rser.2016.10.021 ↗
27. Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems10.1016/j.rser.2012.01.020 ↗
28. Latent heat thermal energy storage systems above 450 C
29. High temperature latent heat thermal energy storage: phase change materials, design considerations and performance enhancement techniques10.1016/j.rser.2013.07.028 ↗
30. Garkushin · 1983
31. 2016
32. Technology of latent heat storage for high temperature application: a review10.2355/isijinternational.50.1229 ↗
33. Physical properties data compilations relevant to energy storage. II
34. Assessment of exergy delivery of thermal energy storage systems for CSP plants: cascade PCMs, graphite-PCMs and two-tank sensible heat storage systems
35. The thermal physical properties and stability of the eutectic composition in a Na2CO3–NaCl binary system10.1016/j.tca.2014.07.002 ↗
36. Eutectic Na2CO3–NaCl salt: a new phase change material for high temperature thermal storage10.1016/j.solmat.2016.04.002 ↗
37. Eutectic Na2CO3-NaCl salt: a new phase change material for high temperature thermal storage10.1016/j.solmat.2016.04.002 ↗
38. Computational thermodynamic modeling of hot corrosion of alloys haynes 242 and HastelloyTM N for molten salt service in advanced high temperature reactors
39. 2024
40. 2024
41. 1977
42. Williams