journal article·2025-06Open access

Evaluation of parameters to characterize the aging of solar reflector materials

Johannes Wette, Florian Sutter, Ricardo Sánchez-Moreno, Florian Wiesinger, Aránzazu Fernández-García

Abstract

The evaluation of the degradation of solar reflectors for concentrating solar thermal applications is of primary importance for material development and to guarantee the optimal optical quality of the solar field over an extended life time. Standardization of durability tests and their evaluation is very limited nowadays and an important ongoing task contributing to the reliability and feasibility of the technology. In this work, a series of long duration accelerated aging tests were used to test a set of different reflector materials, from commercial to experimental and low-cost materials, and by taking the durations to extreme levels never before conducted, assuring the appearance of considerable degradation. The most common degradation parameters were determined and a thorough evaluation of the tests, the parameters and their determination techniques was performed. The copper-accelerated acetic acid salt spray test was confirmed to be the quickest test to provoke degradation in most materials and this way offers the possibility to compare different candidates. Other tests provoke little degradation for most materials even after long durations. The development of corrosion spots is the first parameter to show differences for the materials. The specular reflectance is more sensitive to show degradation than the hemispherical reflecance. An overview table was created which allows to determine minimum test durations to select, depending on the parameter and test to be evaluated. This serves as an important tool for the planning of future tests and may help with the further standardization of testing and evaluation of the durability of solar reflectors. • CASS test confirmed as the most reliable to provoke degradation and compare reflector materials. • Minor changes in commercial materials even after 6000 h for most standard tests. • Formation of silver corrosion spots is the quickest developing degradation parameter. • Specular reflectance develops quicker than hemispherical reflectance to show differences. • Need for automated techniques to assess the corroded area fraction was detected.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. 2023
2. Ardani · 2021
3. 2021
4. 2023
5. Zhu
6. CSP. guru, A Database of Concentrating Solar Power Plants of the World for Energy Modellers and Analysts. (n.d.). https://csp.guru//(accessed January 15, 2024).
7. Comparative assessment of solar concentrator materials10.1016/S0038-092X(03)00116-6 ↗
8. Construction of an enclosed trough EOR system in south Oman10.1016/j.egypro.2014.03.186 ↗
9. Development of a modular concrete heliostat prototype10.1063/5.0086016 ↗
10. Reflectech mirror film: design flexibility and durability in reflecting solar applications
11. Durability testing of silvered-glass mirrors10.1016/j.egypro.2015.03.110 ↗
12. Lifetime prediction model of reflector materials for concentrating solar thermal energies in corrosive environments10.1016/j.solmat.2021.110996 ↗
13. Acceptance criteria for accelerated aging testing of silvered-glass mirrors for concentrated solar power technologies10.1016/j.solmat.2019.01.008 ↗
14. 2018
15. Assessment of durability and accelerated aging methodology of solar reflectors
16. Sandstorm erosion on solar reflectors: a field study on height and orientation dependence10.1016/j.energy.2020.119351 ↗
17. Cleaning agents and techniques for concentrating solar collectors10.1016/0165-1633(80)90048-9 ↗
18. Soiling and cleaning of polymer film solar reflectors10.3390/en9121006 ↗
19. 2022
20. Compilation of a solar mirror materials database and an analysis of natural and accelerated mirror exposure and degradation10.1115/1.4063079 ↗
21. Influence of gaseous pollutants and their synergistic effects on the aging of reflector materials for concentrating solar thermal technologies10.1016/j.solmat.2019.109955 ↗
22. Accelerated aging tests and characterizations of solar mirrors: comparison of combinations of stress factors on degradation10.1016/j.solmat.2020.110851 ↗
23. Advanced cyclic accelerated aging testing of solar reflector materials10.1063/1.5117670 ↗
24. Fernández-García
25. Indirect method to determine near-normal sun-conic reflectance
26. Proposal of a new parameter for the comprehensive qualification of solar mirrors for CSP applications10.1063/1.4949224 ↗
27. Scattering and specular reflection of solar reflector materials – measurements and method to determine solar weighted specular reflectance10.1016/j.solmat.2019.110191 ↗
28. Advanced measurement techniques to characterize the near-specular reflectance of solar mirrors10.1063/1.5117618 ↗
29. Spectral characterization of specular reflectance of solar mirrors10.1016/j.solmat.2015.10.030 ↗
30. Approximated method for modelling hemispherical reflectance and evaluating near-specular reflectance of CSP mirrors10.1016/j.solener.2013.03.014 ↗
31. Advanced analysis of corroded solar reflectors10.3390/coatings9110749 ↗
32. Degradation types of reflector materials used in concentrating solar thermal systems10.1016/j.rser.2021.110879 ↗
33. Analysis of the effects of outdoor and accelerated ageing on the optical properties of reflector materials for solar energy applications
34. How to accelerate natural weathering of polymeric photovoltaic backsheets – a comparison with standardized artificial aging10.1016/j.solmat.2022.111819 ↗
35. Correlation between solar mirror degradation and colorimetric measurement of protective back layer10.1016/j.egypro.2014.03.179 ↗
36. The assessment of reflector material durability for concentrated solar power based on environment exposure and accelerated aging test
37. Review of accelerated ageing test modelling and its application to solar mirrors10.1016/j.solmat.2018.06.024 ↗
38. Behavior of painted mirrors during exposure tests of Salt spray10.1016/S0169-4332(97)00219-5 ↗
39. Prohesion and outdoors tests on corrosion products developed over painted galvanized steel sheets with and without Cr(VI) species10.1016/j.corsci.2004.06.007 ↗
40. 2022
41. RAISELIFE project extends the lifetime of functional CSP materials10.1063/5.0085763 ↗
42. Parameters and method to evaluate the reflectance properties of reflector materials for concentrating solar power technology technology - official reflectance guideline version 3.1
43. 1992
44. 2003
45. Uncertainty study of reflectance measurements for concentrating solar reflectors10.1109/TIM.2020.2975387 ↗
46. Study of degradation mechanisms of a paint coating during an artificial aging test10.1016/S0141-3910(98)00227-4 ↗
47. Characterization of pitting corrosion in bare and sol–gel coated aluminum 2024-T3 alloy10.1016/S0257-8972(01)01000-3 ↗
48. A review of conventional and innovative- sustainable methods for cleaning reflectors in concentrating solar power plants10.3390/su10113937 ↗
49. Durability studies of solar reflectors: a review10.1016/j.rser.2016.04.060 ↗
50. Effect of long term outdoor exposure on anti-soiling coatings for solar reflectors10.1063/5.0028960 ↗
51. Experimental investigation of the anti-soiling performances of different wettability of transparent coatings: superhydrophilic, hydrophilic, hydrophobic and superhydrophobic coatings10.1016/j.solmat.2021.111053 ↗
52. Sandstorm erosion testing of anti-reflective glass coatings for solar energy applications10.1016/j.solmat.2018.02.018 ↗
53. Enhanced equivalent model algorithm for solar mirrors10.1063/5.0028768 ↗
54. Degradation of concentrating solar thermal reflectors in acid rain atmospheres10.1016/j.solmat.2018.06.032 ↗
55. Accelerated and outdoor/natural exposure testing of coatings10.1016/S0079-6700(00)00030-7 ↗
56. Innovative lifetime testing protocol for high-temperature secondary reflector materials used in concentrated solar thermal energies10.1016/j.solmat.2023.112238 ↗
57. Wette
58. Outdoor exposure approach in a harsh environment toward the study of corrosion aspects of primary solar reflectors10.1016/j.solener.2021.11.013 ↗
59. Ho · 2011 · 8