MXene-enhanced nanofluids for superior thermal energy storage in concentrated solar power plants
Source abstract
Abstract
The development and optimization of concentrated solar power plants (CSP) plants, which are considered promising sources of renewable and clean energy, have attracted significant attention. Recently, efforts to improve the efficiency of these plants have focused on increasing their operational temperature. However, this approach presents challenges, particularly regarding the corrosion of metallic components due to the higher temperatures of the molten salts used for energy storage. One potential solution to enhance the thermophysical properties of molten salts and mitigate corrosion is the incorporation of nanomaterials as additives. To This study investigates the effect of multilayer Ti₃C₂T x MXenes at concentrations of 0.5, 1, 2, and 3 wt.-% on the thermal properties of nanofluids consisting of solar salt, thus aiming at enhancing the thermophysical performance for high-temperature thermal energy storage applications. This pioneering research explores how the concentration of MXene affects the specific heat capacity (C p), melting temperature (T m), and decomposition temperature (T d) of the nanofluids. Our results verified that adding MXenes to solar salt helps to enhance its thermal properties, particularly the decomposition temperature (T d) to 609.8 °C (compared to 586.2 °C for pure solar salt) and specific heat capacity (C p), enabling better heat storage. These enhancements are attributed to structural and chemical effects induced by multilayer Ti₃C₂T x, as supported by experimental analyses (TGA, DSC, SEM, Raman spectroscopy, and XRD) and computational simulations. This demonstrates the potential of Ti₃C₂T x for advancing high-temperature thermal energy storage systems in CSP plants.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Solar-Powered Water Purification Methods · Phase Change Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Leveraging the trend analysis for modeling of the greenhouse gas emissions associated with coal combustion10.1007/s11356-024-34654-3 ↗
2. Radiation and nanoparticle interaction for enhanced light absorption and heat conversion10.1016/j.molliq.2024.125702 ↗
3. Optically functional bio-based phase change material nanocapsules for highly efficient conversion of sunlight to heat and thermal storage10.1016/j.energy.2024.132290 ↗
4. Innovation in concentrated solar power10.1016/j.solmat.2011.05.020 ↗
5. Heat transfer fluids for concentrating solar power systems – a review10.1016/j.apenergy.2015.01.125 ↗
6. Thermally enhanced nanocomposite phase change material slurry for solar-thermal energy storage10.1016/j.est.2023.110110 ↗
7. 2014 · 52
8. Heat transfer performance comparisons of supercritical carbon dioxide and NaCl-KCl-ZnCl2 eutectic salts for solar s-CO2 Brayton cycle10.1016/j.egypro.2017.12.112 ↗
9. The effect of sigma-phase precipitation at 800°C on the corrosio resistance in sea- water of a high alloyed duplex stainless steel10.1016/0010-938X(94)90176-7 ↗
10. Comparison of corrosion performance of grade 316 and grade 347H stainless steels in molten nitrate salt10.1063/1.4949258 ↗
11. Materials corrosion for thermal energy storage systems in concentrated solar power plants10.1016/j.rser.2018.01.010 ↗
12. A review of eutectic salts as phase change energy storage materials in the context of concentrated solar power10.1016/j.ijheatmasstransfer.2023.123904 ↗
13. Thermo-physical properties and corrosivity improvement of molten salts by use of nanoparticles for concentrated solar power applications: a critical review10.1016/j.molliq.2020.113807 ↗
14. Thermo-physical properties and corrosivity improvement of molten salts by use of nanoparticles for concentrated solar power applications: a critical review10.1016/j.molliq.2020.113807 ↗
15. Nanoparticles as molten salts thermophysical properties enhancer for concentrated solar power: a critical review10.1016/j.est.2021.103280 ↗
16. Experimental investigation of energy storage properties and thermal conductivity of a novel organic phase change material/MXene as A new class of nanocomposites10.1016/j.est.2019.101115 ↗
17. Sensible heat thermal energy storage performance of mono and blended nanofluids in a free convective-radiation inclined system10.1016/j.csite.2023.103562 ↗
18. Effect of Al2O3 nanoparticle dispersion on the specific heat capacity of a eutectic binary nitrate salt for solar power applications10.1016/j.enconman.2017.03.062 ↗
19. Experimental investigation into the thermos-physical properties by dispersing nanoparticles to the nitrates
20. Experimental investigation on stability of thermal performances of solar salt based nanocomposite10.1016/j.renene.2019.07.009 ↗
21. Enhanced heat capacity of binary nitrate eutectic salt-silica nanofluid for solar energy storage10.1016/j.solmat.2018.12.019 ↗
22. Influence of the production method on the thermophysical properties of high temperature molten salt-based nanofluids10.1016/j.molliq.2020.112570 ↗
23. Novel key parameter for eutectic nitrates based nanofluids selection for concentrating solar power (CSP) system10.1016/j.apenergy.2018.10.114 ↗
24. Rheology of Solar-Salt based nanofluids for concentrated solar power. Influence of the salt purity, nanoparticle concentration, temperature and rheometer geometry10.1016/j.solmat.2017.10.022 ↗
25. One-step synthesis of molten salt nanofluid for thermal energy storage application – a comprehensive analysis on thermophysical property, corrosion behavior, and economic benefit10.1016/j.est.2021.102278 ↗
26. Effect of nanoparticles on heat capacity of nanofluids based on molten salts as PCM for thermal energy storage10.1186/1556-276X-8-448 ↗
27. BN white graphene well-dispersed solar salt nanofluids with significant improved thermal properties for concentrated solar power plants10.1016/j.solmat.2022.111875 ↗
28. Experimental assessment of a novel eutectic binary molten salt-based hexagonal boron nitride nanocomposite as a promising PCM with enhanced specific heat capacity10.37934/arfmts.68.1.7385 ↗
29. Thermal storage properties of molten nitrate salt-based nanofluids with graphene nanoplatelets10.1186/s11671-016-1519-1 ↗
30. Solar salt doped by MWCNTs as a promising high thermal conductivity material for CSP10.1039/C8RA03019G ↗
31. MXene-based phase change materials for solar thermal energy storage10.1016/j.enconman.2022.116432 ↗
32. Thermal and energy performance improvement of hybrid PV/T system by using olein palm oil with MXene as a new class of heat transfer fluid10.1016/j.solmat.2020.110754 ↗
33. Fluorine- and acid-free strategy toward scalable fabrication of two-dimensional MXenes for sodium-ion batteries10.1021/acs.nanolett.3c01201 ↗
34. Two-dimensional nanocrystals produced by exfoliation of Ti 3AlC210.1002/adma.201102306 ↗
35. Rising of MXenes: novel 2D-functionalized nanomaterials as a new milestone in corrosion science - a critical review10.1016/j.cis.2022.102730 ↗
36. Current trends in MXene-based nanomaterials for energy storage and conversion system: a mini review10.3390/catal10050495 ↗
37. Effect of SiO2 nanoparticles on specific heat capacity of low-melting-point eutectic quaternary nitrate salt10.1016/j.solmat.2018.01.014 ↗
38. Experimental study on the effect of SiO2 nanoparticle dispersion on the thermophysical properties of binary nitrate molten salt10.1016/j.solener.2019.03.036 ↗
39. Shape effect of Al2O3 nanoparticles on the thermophysical properties and viscosity of molten salt nanofluids for TES application at CSP plants10.1016/j.applthermaleng.2020.114942 ↗
40. Corrosion aspects of molten nitrate salt-based nanofluids for thermal energy storage applications10.1016/j.solener.2019.07.050 ↗
41. Raman spectroscopy characterization of 2D carbide and carbonitride MXenes10.1021/acs.chemmater.3c01742 ↗
42. Characterization of MXenes at every step, from their precursors to single flakes and assembled films10.1016/j.pmatsci.2020.100757 ↗
43. Impact of CO32− impurities on the thermal performance of Solar Salt in thermal energy storage10.1016/j.est.2024.110886 ↗
44. Thermal stability and microstructure of sodium nitrite in multicomponent molten salts : an experimental analysis10.1016/j.solener.2024.113008 ↗
45. Simulation study of anomalous thermal properties of molten nitrate salt10.1016/j.powtec.2016.11.019 ↗
46. Enhanced thermal energy storage performance of molten salt for the next generation concentrated solar power plants by SiO2 nanoparticles: a molecular dynamics study10.1016/j.apenergy.2022.119555 ↗
47. Effect of nanoparticle dispersion on specific heat capacity of a binary nitrate salt eutectic for concentrated solar power applications10.1016/j.ijthermalsci.2013.02.003 ↗
48. Optimal concentration of alumina nanoparticles in molten hitec salt to maximize its specific heat capacity10.1016/j.ijheatmasstransfer.2013.10.078 ↗
49. Enhancement of specific heat capacity of high-temperature silica-nanofluids synthesized in alkali chloride salt eutectics for solar thermal-energy storage applications10.1016/j.ijheatmasstransfer.2010.11.017 ↗
50. On the relationship between the specific heat enhancement of salt-based nanofluids and the ionic exchange capacity of nanoparticles10.1038/s41598-018-25945-0 ↗
51. Specific heat mechanism of molten salt nanofluids10.1063/1.4868254 ↗
52. Experimental investigation of heat transfer performance of molten HITEC salt flow with alumina nanoparticles10.1016/j.ijheatmasstransfer.2016.11.015 ↗
53. Molten salt thermal conductivity enhancement by mixing nanoparticles10.1016/j.fusengdes.2018.04.121 ↗
54. Investigation on thermal performance of quaternary nitrate-nitrite mixed salt and solar salt under thermal shock condition10.1016/j.renene.2021.05.002 ↗
55. Enhancement of solid-phase thermal conductivity and specific heat of solar salt through addition of MWCNT: new observations and implications for thermal energy storage10.1007/s13204-019-01107-0 ↗
56. Corrosion performance of austenitic stainless steel SS304 in molten nitrate salts and Raman microscopy for stability analysis in thermal energy storage applications10.1016/j.est.2021.103465 ↗