journal article·2024-03Open access

Qualification of laser-weld interconnection of aluminum foil to back-contact silicon solar cells

Barry Hartweg, Kathryn Fisher, Jason Ro, Zachary Holman

Abstract

Laser welding can be used to interconnect high-efficiency back-contact silicon solar cells with low-cost Al foil. This interconnection approach is relatively new and, thus, requires detailed vetting of its reliability before being adopted commercially. In this study, we weld 50-μm-thick Al foil to Sunpower back-contact cells and observe that the laser-weld adhesion, module fill factor, and reliability through thermocycling are all highly correlated to each other. A JMP statistical model built from adhesion data reveals that the statistically significant parameters to improve laser-weld adhesion are the laser pulse energy , pulse density, and pattern. Increasing the laser pulse energy and density improves the foil adhesion to the cell metallization, which is likely because of the improved melting of the Sn capping layer on the Cu electrode of the cells, as identified by cross-sectional microscopy. 94.4% of the modules fabricated using laser welds with a mean adhesion above 0.8 mJ lost less than 5% of their initial maximum power after 200 thermocycles, which is the IEC 61215 criterion for any single accelerated stress test. Additionally, 90.0% of modules fabricated with an as-fabricated module series resistance below 1.9 Ω cm passed thermocycling. Thus, laser-weld adhesion and the as-fabricated module series resistance can be used in the further development of new laser-weld settings and as quality control parameters in the manufacturing of these modules.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Solar cell efficiency tables (Version 60)10.1002/pip.3595 ↗
2. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 2610.1038/nenergy.2017.32 ↗
3. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
4. ZEBRA technology: low cost bifacial IBC solar cells in mass production with efficiency exceeding 23.5
5. Gerritsen · 2018
6. Sickmoeller · 2020
7. "SunPower Maxeon Solar Panels." Maxeon Solar Technologies, Ltd. https://sunpower.maxeon.com/int/solar-panel-products/maxeon-solar-panels (accessed.
8. "Maxeon Gen II Solar Cells." SunPower. https://us.sunpower.com/sites/default/files/sp-gen2-solar-cell-ds-en-a4-160-506760e_0.pdf (accessed.
9. De Jong · 2010
10. Measurement of strains in MWT modules during manufacture10.1016/j.egypro.2012.07.132 ↗
11. Study of compatibility of silicone-based electrically conductive adhesives and conductive backsheets for MWT modules10.1016/j.egypro.2014.08.007 ↗
12. Low cost semi automated assembly unit for small size back contact modules and low cost interconnection approach10.1016/j.egypro.2016.10.085 ↗
13. Development of conductive back-sheet for manufacture of PV modules with back-contact cells
14. Interconnection of busbar-free back contacted solar cells by laser welding10.1002/pip.2514 ↗
15. Laser-welded interconnection of screen-printed Si solar cells10.1016/j.egypro.2014.08.102 ↗
16. FoilMet®-Interconnect: busbarless, electrically conductive adhesive-free, and solder-free aluminum interconnection for modules with shingled solar cells10.1002/pip.3470 ↗
17. Novel foil interconnects for back-contact silicon solar cells
18. Wohlgemuth · 2012
19. 2021
20. Laser Metal Bonding (LMB) - low impact joining of thin aluminum foil to silicon and silicon nitride surfaces10.1016/j.procir.2020.09.109 ↗
21. "JMP Statistical Discovery LLC." https://www.jmp.com/en_us/home.html (accessed. .
22. Aluminum-based mechanical and electrical laser interconnection process for module integration of silicon solar cells10.1109/JPHOTOV.2011.2177072 ↗
23. FoilMet®-connect: upgrading adhesion by the application of laser metal bonding10.1063/5.0126335 ↗