journal article·2024-01

Ribbons lengthening induced by thermal cycling in PV modules part I: Cell-ribbon mechanical interaction through the solder

Jean-Baptiste Charpentier, Philippe Voarino, Julien Gaume

Publisher page

Abstract

A substantial and problematic ribbon lengthening is sometime observed in PV modules exposed to thermal cycling. In large amplitude thermal cycling, it is systematically observed with standard architectures and materials. To our knowledge, there is no available explanation of this effect in the literature. In the present work, a ribbon lengthening mechanism is derived from a simple three layers model. This mechanism relies on the relative thermal expansion of the copper ribbons with respect to the silicon cell, the elasto-plastic behavior of the ribbons and the temperature dependent visco-plastic behavior of the solder. It neglects the existence of the front/back sheet and the encapsulant. An analytical derivation provides a lengthening criterion which depends on the cycling thermal amplitude. Using the Finite Element Method (FEM), a lengthening rate is predicted. Then, it is measured in single cell strings with different thermal amplitudes by indirect means. Finally, the lengthening rate is also measured in single cell laminated modules using local image correlation. The three layers model predictions are in good agreement with the indirect measurements. Nonetheless, direct measurements results are not consistent with it. From these observations and others, it is inferred that the encapsulant comes into play after the solder failure. Its role is further discussed in the Part II of this work.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Silicon and Solar Cell Technologies · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Use of digital image correlation technique to determine thermomechanical deformations in photovoltaic laminates: Measurements and accuracy10.1016/j.solmat.2010.03.028 ↗
2. Thermal stress and strain of solar cells in photovoltaic modules
3. M. Pander, R. Meier, M. Sander, S. Dietrich, M. Ebert, Lifetime estimation for solar cell interconnectors, in: 28th EU PVSEC, 2013.
4. Enabling the measurement of thermomechanical stress in solar cells and PV modules by confocal micro-Raman spectroscopy10.1016/j.solmat.2019.01.028 ↗
5. Field failure mechanism study of solder interconnection for crystalline silicon photovoltaic module10.1016/j.microrel.2012.06.027 ↗
6. Solder joint failure modes in the conventional crystalline si module10.1016/j.egypro.2014.08.010 ↗
7. Unveiling the failure mechanism of electrical interconnection in thermal-aged PV modules10.1109/TDMR.2019.2956506 ↗
8. Climate specific thermomechanical fatigue of flat plate photovoltaic module solder joints10.1016/j.microrel.2016.03.024 ↗
9. The influence of PV module materials and design on solder joint thermal fatigue durability10.1109/JPHOTOV.2016.2598255 ↗
10. Effect of operating temperature on degradation of solder joints in crystalline silicon photovoltaic modules for improved reliability in hot climates10.1016/j.solener.2018.06.007 ↗
11. Analysis of solder joint degradation and output power drop in silicon photovoltaic modules for reliability improvement10.1016/j.microrel.2021.114399 ↗
12. Thermomechanical reliability assessment of solder joints in a photovoltaic module operated in a hot climate10.1109/TCPMT.2019.2933057 ↗
13. Evaluation of thermo-mechanical damage and fatigue life of solar cell solder interconnections10.1016/j.rcim.2016.12.008 ↗
14. Physics-of-degradation-based life prediction of solder interconnects of long-life solar arrays in low-earth orbit10.1016/j.solener.2022.11.016 ↗
15. A review of mechanical properties of lead-free solders for electronic packaging10.1007/s10853-008-3125-9 ↗
16. State of the art of lead-free solder joint reliability10.1115/1.4048037 ↗
17. Mechanical behaviour and fatigue of copper ribbons used as solar cell interconnectors
18. A critical review of constitutive models for solders in electronic packaging10.1177/1687814017714976 ↗
19. Constitutive relations for tin-based-solder joints
20. Linear viscoelastic characterization of electrically conductive adhesives used as interconnect in photovoltaic modules10.1002/pip.3257 ↗