Novel busbar design for screen-printed front side Al metallization of high-efficiency solar cell
Source abstract
Abstract
The need to reduce the silver consumption for future global PV production requires novel approaches for cell metallization and module integration . A screen-printed aluminum cell metallization on the front side could contribute here, but requires a redesign of the solder pads and busbars. A compromise between shading and resistive losses is needed. We investigate the inclusion of Ag solder pads in high-aspect-ratio Al finger grids on the front side of p-type back junction solar cells featuring passivating polysilicon on oxide (POLO) contacts on the rear side. In order to determine the optimal geometric dimensions of the solder pads, we characterize the resistance at the interface between the Ag solder pads and the Al finger grid in dependence on the size of the overlap between the two paste. A contact resistance of 285 mΩ is determined for 200 μm-narrow Al busbars and small solder pads of 750 μm in length. This would require tens of solder pads per busbar for acceptable power losses below 0.5 % coming along with significant shading. Therefore, a new metallization design is developed. We use narrow Ag busbars with a widened intersection to the Al fingers in order to reduce the contact resistance caused by the Ag–Al alloy. Thereby, the shading losses of the solderable busbars and pads are less than 1.5 %.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Silicon Carbide Semiconductor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Design considerations for multi-terawatt scale manufacturing of existing and future photovoltaic technologies: challenges and opportunities related to silver, indium and bismuth consumption10.1039/D1EE01814K ↗
2. The silver learning curve for photovoltaics and projected silver demand for net‐zero emissions by 2050
3. Photovoltaics at multi-terawatt scale: waiting is not an option10.1126/science.adf6957 ↗
4. Screening carrier selective contact combinations for novel crystalline Si cell structures. 8 pages/35th European photovoltaic solar energy conference and exhibition; 39-46
5. 23.1%-Efficient POLO back junction solar cells. 3 pages/8th world conference on photovoltaic energy conversion; 107-109
6. Approaching 23% with p-type back junction solar cells featuring screen-printed Al front grid and passivating rear contacts. 4 pages/38th European photovoltaic solar energy conference and exhibition; 158-161
7. The composition dependence of internal stress, ultramicrohardness and electrical resistivity of binary alloy films containing silver, aluminium, gold, cobalt, copper, iron or nickel10.1016/0040-6090(85)90299-8 ↗
8. Influence of silver-aluminium alloy at solar cell rear side on series resistance and open circuit voltage10.1016/j.egypro.2016.07.065 ↗
9. Contact resistance and contact resistivity10.1149/1.2404240 ↗
10. Griddler: intelligent computer aided design of complex solar cell metallization patterns
11. Formation of Ag-Al Alloy in context of PERC solar cell metallization10.1016/j.egypro.2017.09.271 ↗
12. In-laminate laser soldering – a gentle method to assemble and interconnect silicon solar cells to modules
13. Solarzelle mit schmalem Verbindungsbereich zwischen Kontaktfinger und Busbar; patent pending by ISFH, submitted for publication 11.4.2023 Deutsches Patent- und Markenamt.