journal article·2024-07

Study on the process of hydrogen-doped indium oxide for silicon heterojunction solar cell mass production

Yunlai Yuan, Zhe Chen, Hui Peng, Xixiang Xu, Minghao Qu, Shi Yin, Xiaoning Ru, Wangping Wu, Lvzhou Li, Qinqin Wang, Jianning Ding

Publisher page

Abstract

In this work, we conducted a comparative study on water vapor (H 2O) process and hydrogen gas (H 2 ) process to prepare the IMO:H films based on industrialized DC magnetron sputtering system. To dynamically control the residual H 2 O pressure, we installed a set of polycold coil and kept it turned on during the sputtering process. The film characteristics of Hall mobility, carrier density, sheet resistance, and transparency was investigated. The results revealed that the silicon heterojunction (SHJ) solar cell with H 2 process had a higher Hall mobility and greater transparency in the 400–600 nm wavelength range resulting in a lower contact resistivity and a slight increase current density compared to the H 2O process. The median efficiency ( E ff) achieved with the H 2 process improved by 0.09% absolute to 25.43%, mainly because of the increased J sc and FF. And the IMO:H films with H 2 process had a large basal spacing with (400) and (222) crystal planes resulting in maintaining a more stable and reliable structure at temperatures below 200 °C. After the optimization of TCO layer process, we manufactured the industrial-grade SHJ cells with max efficiency ( E ff), V oc, J sc, and fill factor (FF) values as high as 26.27%, 753 mV, 41 mA/cm 2, and 86%, respectively. The IMO:H films with H 2 process can thus be considered more suitable for large-scale production.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Silicon heterojunction solar cells with up to 26.81% efficiency achieved by electrically optimized nanocrystalline-silicon hole contact layers
2. Amorphous silicon solar cell10.1063/1.88617 ↗
3. Carbon-dioxide as annealing atmosphere to retain the electrical properties of indium-tin oxide10.1016/j.matlet.2020.128195 ↗
4. High-mobility hydrogenated indium oxide without introducing water during sputtering10.1016/j.egypro.2016.07.083 ↗
5. Achievement of 25.54% power conversion efficiency by optimization of current losses at the front side of silicon heterojunction solar cells10.1002/pip.3641 ↗
6. Hydrogen-doped In2O3 as high-mobility transparent conductive oxide10.1143/JJAP.46.L685 ↗
7. Study on the hydrogen doped indium oxide for silicon heterojunction solar cell application
8. Effects of water partial pressure on the activated electron beam evaporation process to deposit tin‐doped indium‐oxide films10.1116/1.579409 ↗
9. Study on the growth mechanism of tin-doped indium oxide films deposited by direct current pulse magnetron sputtering10.1016/j.tsf.2013.06.057 ↗
10. Structural and electrical properties of hydrogen-doped In2O3 films fabricated by solid-phase crystallization
11. Zr‐Doped indium oxide (IZRO) transparent electrodes for Perovskite‐based Tandem solar cells10.1002/adfm.201901741 ↗
12. Effect of residual water vapor on the performance of indium tin oxide film and silicon heterojunction solar cell10.1016/j.solener.2020.04.086 ↗
13. Low temperature-pyrosol-deposition of aluminum-doped zinc oxide thin films for transparent conducting contacts10.1016/j.tsf.2015.11.053 ↗
14. Improvement of the optoelectronic properties of tin oxide transparent conductive thin films through lanthanum doping10.1016/j.jallcom.2016.01.104 ↗
15. Effect of microstructures on nanocrystallite nucleation and growth in hydrogenated amorphous indium–tin–oxide films10.1063/1.1528298 ↗
16. Hydrogen doping in indium oxide: an ab initio study10.1103/PhysRevB.80.193202 ↗
17. Development of high efficiency rear-emitter n-type silicon heterojunction solar cells
18. Understanding the role of mobility of ITO films for silicon heterojunction solar cell applications10.1016/j.solmat.2016.08.002 ↗
19. A simple method with analytical model to extract heterojunction solar cell series resistance components and to extract the A-Si:H(i/p) to transparent conductive oxide contact resistivity
20. Hydrogen-doped indium oxide/indium tin oxide bilayers for high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2013.03.024 ↗