Development of 22.5 % p-type tunnel oxide passivated contact solar cells through efficiency enhancement by replacing local Al-BSF in PERC cells with (p+) poly-Si/SiO2 carrier selective contact
Source abstract
Abstract
Phosphorus doped poly-Si based tunnel oxide passivated contacts ( n-TOPCon) on the rear side of n-type Si have led to significant enhancement in the efficiency of front junction n-type Si solar cells due to their excellent carrier selectivity. However, the adoption of boron (B) doped poly-Si/SiO 2 contacts ( p-TOPCon) remains limited compared to their n-TOPCon counterparts due to their inferior electrical properties. This article presents the understanding and development of high-efficiency, large-area, screen-printed p-TOPCon solar cells on p-type Si by replacing local aluminum back surface field (Al-BSF) in passivated emitter rear contact (PERC) solar cells with the optimized p-TOPCon layer. We have developed a novel process that simultaneously activates the rear p-TOPCon layer and forms the phosphorus oxy-chloride (POCl 3) diffused emitter on the front in a single high-temperature step, eliminating the need for additional masking and separate annealing process. The impact of annealing temperature on the passivation quality of the rear p-TOPCon layer was systematically invessstigated. In addition, through extensive device characterizations and simulations, the rear p + poly thickness, firing conditions, and rear grid design were optimized to balance passivation quality and minimize parasitic light absorption in the p-TOPCon layer. This research demonstrated that p-TOPCon solar cells can achieve a 0.3–0.4 % higher efficiency over the reference PERC solar cells, reaching a peak efficiency of 22.5 %.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Fischer · 2024
2. Q CELLS > 24% silicon solar cells with mass-production processes10.1109/JPHOTOV.2021.3112122 ↗
3. Technology evolution of the photovoltaic industry: learning from history and recent progress10.1002/pip.3626 ↗
4. A roadmap toward 24% efficient PERC solar cells in industrial mass production
5. Rohatgi · 2022
6. 22.61 % efficient fully screen printed PERC solar cell
7. Optimization of phosphorus dopant profile of industrial p-type mono PERC solar cells10.1016/j.solmat.2018.10.002 ↗
8. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
9. Passivating and carrier-selective contacts - basic requirements and implementation
10. Passivating contacts for crystalline silicon solar cells10.1038/s41560-019-0463-6 ↗
11. Q. ANTUM NEO with LECO exceeding 25.5% cell efficiency10.1016/j.solmat.2024.113110 ↗
12. Solar cell efficiency tables (Version 61)10.1002/pip.3646 ↗
13. JinkoSolar: ‘Record’ 25.25% Efficiency For TOPCon Cell." [Online]. Available: https://taiyangnews.info/jinkosolar-record-25-25-efficiency-for-n-type-mono-cell/.
14. The evolution of silicon wafer cleaning technology10.1149/1.2086825 ↗
15. Nitric acid oxidation of Si to form ultrathin silicon dioxide layers with a low leakage current density10.1063/1.1621720 ↗
16. The application of poly-Si/SiOx contacts as passivated top/rear contacts in Si solar cells10.1016/j.solmat.2016.09.015 ↗
17. Opal 2: rapid optical simulation of silicon solar cells
18. Measurement of the emitter saturation current by a contactless photoconductivity decay method
19. Sinton · 1996 · 457
20. A quasi-steady-state open-circuit voltage method for solar cell characterization
21. Schroder · 2015
22. Specific contact resistance measurements on semiconductors10.1088/0022-3735/22/5/010 ↗
23. Fully screen-printed bifacial large area 22.6% N-type Si solar cell with lightly doped ion-implanted boron emitter and tunnel oxide passivated rear contact
24. The concept of skins for silicon solar cell modeling10.1016/j.solmat.2017.05.012 ↗
25. SiO2 surface passivation layers–a key technology for silicon solar cells10.1016/j.solmat.2018.04.029 ↗
26. Thermal annealing effects on tunnel oxide passivated hole contacts for high-efficiency crystalline silicon solar cells
27. Research of annealing and boron doping on SiOx/p+-poly-Si hole-selective passivated contact10.1109/JPHOTOV.2020.3016631 ↗
28. Structural evolution of tunneling oxide passivating contact upon thermal annealing10.1038/s41598-017-13180-y ↗
29. Tunnel oxide passivated carrier-selective contacts based on ultra-thin SiO2 layers10.1016/j.solmat.2015.06.048 ↗
30. Progress with passivation and screen-printed metallization of Boron-doped monoPoly™ layers10.1016/j.solener.2021.11.015 ↗
31. Optimization of in-situ and ex-situ doped p+ passivating contact for high efficiency p-TOPCon solar cell application
32. Development of APCVD BSG and POCl3 codiffusion process for double-side TOPCon solar cell precursor fabrication10.1109/JPHOTOV.2024.3423814 ↗
33. Jones · 2008 · 23
34. Plummer · 2009
35. Impact of firing temperature on fire-through metal contacts to P-doped (n+) and B-doped (p+) poly-Si10.1016/j.solmat.2021.111217 ↗
36. Study of screen printed metallization for polysilicon based passivating contacts10.1016/j.egypro.2017.09.242 ↗
37. Quantitative understanding and implementation of screen printed p+ poly-Si/oxide passivated contact to enhance the efficiency of p-PERC cells
38. Screen printing metallization of boron emitters10.1002/pip.933 ↗
39. Development of screenprintable contacts for p+ emitters in bifacial solar cells
40. Study of screen printed metallization for polysilicon based passivating contacts10.1016/j.egypro.2017.09.242 ↗
41. Parasitic absorption in polycrystalline Si-layers for carrier-selective front junctions10.1016/j.egypro.2016.07.057 ↗
42. Optical properties of phosphorus‐doped polycrystalline silicon layers10.1063/1.328681 ↗
43. Correlation between the open-circuit voltage and recombination loss at metal-silicon interfaces of crystalline silicon solar cells10.1016/j.solmat.2020.110519 ↗