journal article·2025-04Open access

Environmental influences on thermal performance of direct absorption solar collector filled with nanofluid

Morteza Mohammadi

Abstract

Direct absorption flat solar collectors (DAFSC) have been drawn much attention to many residential heating purposes. It has been shown that thermal efficiency of these thermal devices will be enhanced if appropriate amount of nanoparticles volume concentration is exploited in collector. In the present study, first of all, a determination procedure for finding optimum amount of arbitrary chosen nanoparticles volume fraction utilized in DAFSC was presented by use of general chart of solar-weighted absorption coefficients against optical thickness of nanofluids in which the nanofluids extinction coefficients were predicted by independent Rayleigh scattering approximation model. This is an important step preventing either undesirable larger value of thermal losses from collector or reducing construction cost of nanofluid-based DAFSC due to smaller exploitation of nanoparticle volume concentration which can be considered as a part of novelty of current study. In the next step, an important designing parameter of collector namely overall heat transfer coefficient was predicted by utilization of thermal resistance network of DAFSC from which thermal losses of collector can be computed. Finally, among various environmental parameters affecting thermal performance of collector, it was found that by increasing wind speed from 0.125 to 16.2 m/s, energy and exergy efficiencies of DAFSC were severely reduced up to 30 % and 51 %, respectively. Furthermore, higher ambient air temperature and relative humidity can boost up thermal efficiency of collector up to 14 % while the role of ambient air temperature, solely, at constant value of other affecting parameters was quite minor.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Nanofluid Flow and Heat Transfer · Solar Thermal and Photovoltaic Systems · Heat Transfer Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Global energy consumption in a warming climate10.1007/s10640-017-0198-4 ↗
2. Development of regression models to forecast the CO2 emissions from fossil fuels in the BRICS and MINT countries10.1016/j.energy.2022.125650 ↗
3. Solar energy systems potential for nearly net zero energy residential buildings10.1016/j.solener.2015.03.037 ↗
4. Parabolic trough solar collectors: a sustainable and efficient energy source
5. Direct absorption nanofluid-based solar collectors for low and medium temperatures. A review10.1016/j.energy.2022.124916 ↗
6. Applicability of nanofluids in high flux solar collectors10.1063/1.3571565 ↗
7. Mitigating PV cell cracking in solar photovoltaic thermal collectors with a novel H-pattern absorber design10.1016/j.applthermaleng.2024.122516 ↗
8. Solar steam generation: steam by thermal concentration10.1038/nenergy.2016.133 ↗
9. An experimental investigation of a low temperature Al2O3-H2O nanofluid based direct absorption solar collector10.1016/j.solener.2015.04.041 ↗
10. Experimental investigation of CuO nanofluid-based direct absorption solar collector for residential applications10.1016/j.rser.2015.07.131 ↗
11. A new application of carbon nanotubes nanofluid as working fluid of low-temperature direct absorption solar collector10.1016/j.solmat.2013.11.004 ↗
12. A review on optical properties and application of nanofluids in direct absorption solar collectors (DASCs)10.1016/j.rser.2017.01.015 ↗
13. Absorption characteristics of nanoparticles with sharp edges for a direct-absorption solar collector10.1016/j.renene.2019.05.133 ↗
14. Application of artificial neural network for performance prediction of a nanofluid-based direct absorption solar collector
15. Empirical correlations for heat transfer in a silver nanofluid-based direct absorption solar collector10.1016/j.seta.2018.05.001 ↗
16. Evaluating the optical properties of TiO2 nanofluid for a direct absorption solar collector10.1080/10407782.2014.955344 ↗
17. Experimental investigation of first and second laws in a direct absorption solar collector using hybrid Fe3O4/SiO2 nanofluid10.1007/s10973-018-7624-x ↗
18. An experimental investigation on the effect of Al2O3–H2O nanofluid on the efficiency of flat-plate solar collectors10.1016/j.renene.2011.08.056 ↗
19. Energy and exergy analysis of SiO2/Ag-CuO plasmonic nanofluid on direct absorption parabolic solar collector10.1016/j.renene.2020.09.139 ↗
20. Analyses of exergy efficiency and pumping power for a conventional flat plate solar collector using SWCNTs based nanofluid10.1016/j.enbuild.2014.03.061 ↗
21. A numerical and experimental investigation on the performance of a low-flux direct absorption solar collector (DASC) using graphite, magnetite and silver nanofluids10.1016/j.solener.2016.06.023 ↗
22. Investigation of factors influencing the performance of nanofluid-based direct absorption solar collector using Taguchi method10.1007/s10973-018-7721-x ↗
23. Performance evaluation and parameter optimization of tubular direct absorption solar collector with photothermal nanofluid
24. Comparative assessment of direct absorption solar collector performance in different climates10.1038/s41598-023-48780-4 ↗
25. Nanofluid-based direct absorption solar collector10.1063/1.3429737 ↗
26. Thermo-hydrodynamical optimization of direct absorption solar collector from Stokes to low Reynolds numbers regimes of nanofluid flow
27. Modest · 2013
28. Bohren · 2008
29. Nanofluid optical property characterization: towards efficient direct absorption solar collectors10.1186/1556-276X-6-225 ↗
30. Geometry optimization of a nanofluid-based direct absorption solar collector using response surface methodology10.1016/j.solener.2015.09.007 ↗
31. Hydrodynamic and heat transfer study of dispersed fluids with submicron metallic oxide particles10.1080/08916159808946559 ↗
32. Conceptions for heat transfer correlation of nanofluids10.1016/S0017-9310(99)00369-5 ↗
33. Experimental investigation on thermal conductivity and stability of water-graphite nanofluid10.18186/thermal.1025968 ↗
34. Measurements of nanofluid viscosity and its implications for thermal applications10.1063/1.2356113 ↗
35. Duffie · 2013
36. About the equivalent radiative temperature for clear skies10.1016/0038-092X(84)90247-0 ↗
37. The use of dew-point temperature in humidity calculations10.6028/jres.074C.014 ↗
38. First and second laws analysis of a minichannel-based solar collector using boehmite alumina nanofluids: effects of nanoparticle shape and tube materials10.1016/j.ijheatmasstransfer.2014.07.009 ↗
39. Kalogirou · 2013
40. Bairamvand · 2022
41. Optical properties of edible oils within spectral range from 300 to 2500 nm determined by double optical path length transmission method10.1364/AO.54.003886 ↗
42. Carbon nanotube-based black coatings10.1063/1.5009190 ↗
43. Optical properties of soda lime silica glasses10.1016/0165-1633(85)90052-8 ↗
44. Iqbal · 1983
45. Optical properties of solar-absorbing oxide particles suspended in a molten salt heat transfer fluid10.1016/0038-092X(78)90123-8 ↗
46. Optical properties of liquids for direct absorption solar thermal energy systems10.1016/j.solener.2008.12.009 ↗
47. Mixed convection from an open cavity in a horizontal channel10.1016/j.icheatmasstransfer.2004.10.018 ↗
48. Cengel · 2002
49. Wind heat transfer coefficient in solar collectors in outdoor conditions10.1016/j.solener.2010.03.003 ↗
50. Cengel · 2011