journal article·2025-04

Investigation on the efficiency of evacuated tube collector with heat pipe in different configurations of internal fin mounting

Piotr Olczak, Jan Porzuczek, Małgorzata Olek

Publisher page

Abstract

Evacuated tube collectors with heat pipes (ETCHP) can be used for both standard and high-temperature applications. In both cases, efficiency is crucial. Therefore, a study on the heat transport efficiency of ETCHP with various internal fin configurations was conducted. The research combined computational fluid dynamics (CFD) simulations and experimental measurements to analyze the effectiveness of solar energy absorption. A solar research station with two solar tubes arranged in series was developed for the study. The CFD simulations, conducted using Ansys Fluent software, modeled the heat flow and temperature distribution within the solar tubes. The simulations considered various parameters, including thermal conductivity and heat transfer coefficients, to investigate their impact on heat absorption efficiency. During standard installation of these solar tubes, there is no specific information regarding the orientation of the internal fin relative to the sun., However, tests indicate that the temperature difference between favorable and unfavorable fin orientation can exceed 10 K (for outside temperature 20–25 °C and solar radiation intensity more than 900 W/m2). Additionally, the efficiency difference is approximately 2 percentage points, representing around 10 % of the potential total heat losses in ETCHP.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Heat Transfer and Boiling Studies · Heat Transfer and Optimization · Heat Transfer Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Solar thermal collectors and applications10.1016/j.pecs.2004.02.001 ↗
2. Multiscale modeling and performance analysis of evacuated tube collectors for solar water heaters using diffuse flat reflector10.1016/j.renene.2015.08.013 ↗
3. Próżnia w kolektorze słonecznym zmniejsza straty ciepła na drodze konwekcji i przewodzenia
4. Comparative field performance study of flat plate and heat pipe evacuated tube10.1016/j.energy.2011.03.034 ↗
5. The comparison of solar energy gaining effectiveness between flat plate collectors and evacuated tube collectors with heat pipe: case study10.3390/en13071829 ↗
6. Once upon a time
7. Walker · 2013
8. Examination of the Hungarian electricity industry structure with special regard to renewables10.3390/en16093826 ↗
9. Where does the capacity market money go? Lessons learned from Poland10.1016/j.enpol.2023.113419 ↗
10. Sustainable energy supply management in the mechanical-engineering industry
11. Milian Gómez · 2023 · 187
12. Progress and latest developments of evacuated tube solar collectors
13. Theoretical and experimental investigation of the filled-type evacuated tube solar collector with U tube10.1016/j.solener.2011.04.012 ↗
14. Evacuated tube solar collectors integrated with phase change materials10.1016/j.solener.2015.12.040 ↗
15. Mobilized thermal energy storage (M-TES) system design for cooperation with geothermal energy sources10.1016/j.apenergy.2022.120567 ↗
16. The role of phase change materials for the sustainable energy10.1051/e3sconf/20161000068 ↗
17. Theoretical and experimental study for temperature distribution and flow profile in all water evacuated tube solar collector considering solar radiation boundary condition10.1016/j.solener.2016.12.035 ↗
18. Thermal performance of two evacuated tube solar collectors with flat heat pipes10.1016/j.applthermaleng.2024.122366 ↗
19. CFD analysis of rib roughened solar evacuated tube collector for air heating
20. Applications of nanotechnology in renewable energies—a comprehensive overview and understanding10.1016/j.rser.2014.10.027 ↗
21. Applications of nanotechnology in renewable energies—a comprehensive overview and understanding10.1016/j.rser.2014.10.027 ↗
22. A review of nano fluid role to improve the performance of the heat pipe solar collectors10.1016/j.egypro.2017.03.044 ↗
23. A review on applications and techniques of improving the performance of heat pipe-solar collector systems10.1016/j.solener.2022.03.022 ↗
24. Investigation the performance of an evacuated tube solar collector filled with MWCNT/water nanofluid under the climate conditions of Al-hilla (Iraq)
25. 2016
26. 2016
27. AT-700, 2016.
28. 2016
29. 2018
30. Low-cost and fast synthesis of nanoporous silica cryogels for thermal insulation applications
31. 2016
32. CFD analysis of a heat collector element in a solar parabolic trough collector
33. Computational fluid dynamics (CFD) analysis of air-cooled solar photovoltaic (PV/T) panels10.1016/j.matpr.2023.05.198 ↗
34. The numerical model of the high temperature receiver for concentrated solar radiation10.1016/j.enconman.2016.07.036 ↗
35. 2015
36. 2014
37. 2012
38. 2016
39. Sheet · 2012
40. Wallin · 2012
41. On real energy model of photovoltaic systems: creation and validation10.1016/j.enconman.2024.118810 ↗
42. Development and tests of the novel configuration of the solar chimney with sensible heat storage
43. Possibilities of transition from centralized energy systems to distributed energy sources in large polish cities10.3390/en13226007 ↗
44. Determination of the energy performance of a solar low energy house with regard to aspects of energy efficiency and smartness of the house10.3390/en13123232 ↗
45. Duffie · 2006