Analytical model for photocurrent density in linearly graded band gap Sb2Se3 solar cells
Source abstract
Abstract
This study introduces a model to estimate the photocurrent density in Sb 2Se 3 solar cells with a linearly graded band gap, adaptable for various grading profiles. The model incorporates both carrier generation and recombination processes, along with an effective absorption coefficient, to more accurately compute the photocurrent density. Our results show that band gap grading leads to higher photocurrent densities compared to non-graded cells, offering design flexibility for improved device performance. Specifically, the graded band gap reduces sensitivity to band-gap changes, allowing for enhanced built-in voltage and back surface field effects. We identify an optimal grading strength that maximizes photocurrent density, while excessive grading reduces absorption efficiency. Additionally, longer diffusion lengths contribute to higher photocurrent densities, though recombination in the depletion region has a more pronounced effect than in the absorber. These findings suggest that controlled band gap grading in Sb 2Se 3 solar cells can significantly enhance their efficiency.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Advanced Semiconductor Detectors and Materials · Thermography and Photoacoustic Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Growth and optical properties of nanocrystalline Sb2Se3 thin-films for the application in solar-cells10.1016/j.solener.2020.10.001 ↗
2. The limiting efficiency of band gap graded solar cells10.1016/S0927-0248(98)00108-1 ↗
3. Graded-bandgap pGa1–xAlxAs-nGaAs heterojunction solar cells10.1063/1.322083 ↗
4. Computer simulation and modeling of graded bandgap CuInSe2/CdS based solar cells10.1109/16.485544 ↗
5. Band-gap engineering in CdS/Cu(In,Ga)Se2 solar cells10.1063/1.362533 ↗
6. Band-gap engineering in Cu(In,Ga)Se2 thin films grown from (In,Ga)2Se3 precursors10.1016/0927-0248(95)00122-0 ↗
7. Device modeling and simulation of the performance of Cu(InGa)Se2 solar cells10.1016/S0038-1101(03)00289-2 ↗
8. A new approach to high-efficiency solar cells by band gap grading in Cu(In,Ga)Se2 chalcopyrite semiconductors10.1016/S0927-0248(00)00274-9 ↗
9. High voltage Cu(In,Ga)Se2 devices with Ga-profiling fabricated using co-evaporation
10. Carrier collection in Cu(In,Ga)Se2 solar cells with graded band gaps and transparent ZnO:Al back contacts10.1016/j.solmat.2006.12.014 ↗
11. Investigating the potential of WO3 and WS2 as Cd-free buffer layers in Sb2Se3-Based thin-film solar cells: a numerical study with SCAPS-1D software10.1016/j.solmat.2024.112891 ↗
12. Upper efficiency limit of Sb2Se3 solar cells10.1016/j.joule.2024.05.004 ↗
13. A novel Se-diffused selenization strategy to suppress bulk and interfacial defects in Sb2Se3 thin film solar cell
14. Growth of thin films by selenization of RF sputtered binary precursors10.1016/j.solmat.2018.08.003 ↗
15. A simple model for the photocurrent density of a graded band gap CIGS thin film solar cell10.1016/j.solener.2011.12.022 ↗
16. Effective absorption coefficient for graded band-gap semiconductors and the expected photocurrent density in solar cells10.1016/j.solmat.2008.02.015 ↗
17. Wide bandgap Sb2S3 solar cells
18. The crystal structure, electronic structure and photoelectric properties of a novel solar cells' absorber material Sb2Se3-xSx10.1016/j.jssc.2019.01.004 ↗
19. Analytical versus numerical analysis of back grading in CIGS solar cells, Sol10.1016/j.solmat.2010.10.020 ↗
20. Bandgap grading via sputtering and post-Selenization using SeS2 powder enabling Sb2(S,Se)3 solar cells with 7.1% efficiency10.1016/j.solmat.2023.112464 ↗
21. 5.91%-efficient Sb2Se3 solar cells with a radio-frequency magnetron-sputtered CdS buffer layer10.1016/j.apmt.2019.06.001 ↗
22. How oxygen exposure improves the back contact and performance of antimony selenide solar cells10.1021/acsami.0c14256 ↗
23. Over 7% efficiency of Sb2(S,Se)3 solar cells via V-shaped bandgap engineering
24. Enhancing the efficiency of Sb2(S,Se)3 thin-film solar cells via Li doping in close-spaced sublimation10.1016/j.solener.2024.113117 ↗
25. Variable band-gap semiconductors as the basis of new solar cells, Sol
26. Device modelling and numerical analysis of high-efficiency double absorbers solar cells with diverse transport layer materials10.1016/j.rio.2024.100647 ↗
27. Modeling the current-voltage characteristics of Sb2Se3 thin film solar cells through Sah-Noyce-Shockley recombination model10.1016/j.solmat.2024.112828 ↗
28. Modeling a tandem solar cell based on Sb2S3 and Sb2Se3 absorber layers
29. Graded bandgap modification for highly efficient carrier transport in antimony sulfide-selenide tandem solar cells10.1016/j.solmat.2022.111926 ↗
30. Benchmark investigation of band-gap tunability of monolayer semiconductors under hydrostatic pressure with focus on antimony10.3390/nano10112154 ↗
31. Effect of defect density, bandgap profile, material composition, thickness, and doping density of the absorber layer on the performance of thin film solar cell based on antimony selenosulfide Sb2(Se1-ySy)310.15251/CL.2024.214.305 ↗
32. Electronic, optical properties and band-gap tunability of monolayer antimony under pressure: a first-principle study10.1016/j.vacuum.2022.111484 ↗
33. Band gap and defect engineering for high-performance cadmium-free Sb2(S,Se)3 solar cells and modules