journal article·2024-09Open access

Preparation and thermal properties of latent functional thermal fluid based on size-controllable phase change nanocapsules

Qi Zhang, Chongyang Liu, Xuehong Wu, Xueling Zhang, Jun Song, Yanfang Li, Yiqiu Mao

Abstract

Size-controllable 1-octadecanol@polystyrene phase change nanocapsules (NEPCMs) were prepared using the miniemulsion polymerization and dispersed in deionized water containing multi-walled carbon nanotubes to prepare a latent functional thermal fluid (LFTF). The results demonstrate that the NEPCMs exhibit a typical core-shell structure. The average particle size (55.28–143.8 nm) of the NEPCMs can be regulated by controlling the content of compound emulsifiers . The optimal phase change enthalpy has an excellent heat storage capacity of about 222.7 J/g, the encapsulation efficiency is up to 80.63 %, and the average particle size is about 88.3 nm. The heating/cooling cycles results show that NEPCMs have excellent cycle stability. LFTF containing 10 wt% NEPCMs was considered the optimal choice for its excellent photothermal conversion efficiency (up to 64.91 %), excellent dispersion stability (zeta potential 39.17 mV) and thermal storage capacity (peak specific heat capacity 5.72 J g −1 K −1 ). Under the influence of solar radiation, the temperature rise curve of LFTF exhibited a rapid initial warming rate followed by a plateau period of approximately 76 min upon reaching the melting point of the NEPCMs, whose photothermal conversion efficiency is roughly 2.18 times that of water. The experimental findings demonstrate the potential application of LFTF based on NEPCMs in the solar thermal industry.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Phase Change Materials Research · Advanced Thermoelectric Materials and Devices · Phase-change materials and chalcogenides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. High performance photothermal carbon nanotubes/nanostructured hydrogel for solar electricity production and solar water sterilization
2. Modified mica-supported phase change materials for efficient solar thermal conversion and thermal energy management10.1016/j.applthermaleng.2023.121701 ↗
3. A novel CNT encapsulated phase change material with enhanced thermal conductivity and photo-thermal conversion performance10.1016/j.solmat.2018.04.034 ↗
4. Recent progress on concentrating direct absorption solar collector using nanofluids10.1007/s10973-018-7964-6 ↗
5. Photo-thermal conversion characteristics of carbon black-ethylene glycol nanofluids for applications in direct absorption solar collectors10.1016/j.applthermaleng.2019.114402 ↗
6. High temperature and long-term stability of carbon nanotube nanofluids for direct absorption solar thermal collectors10.1016/j.solener.2014.03.013 ↗
7. An investigation of thermal stability of carbon nanofluids for solar thermal applications10.1016/j.solmat.2016.07.032 ↗
8. Preparation of graphite nanoparticles-modified phase change microcapsules and their dispersed slurry for direct absorption solar collectors10.1016/j.solmat.2016.09.020 ↗
9. Review on the preparation and performance of paraffin-based phase change microcapsules for heat storage
10. Review on micro/nano phase change materials for solar thermal applications10.1016/j.renene.2019.03.088 ↗
11. Heat transfer performance by forced convection of microencapsulated phase change material-latent functional thermal fluid flowing in a mini-channels heat sink10.1016/j.applthermaleng.2022.119158 ↗
12. Photo-thermal performance evaluation on MWCNTs-dispersed microencapsulated PCM slurries for direct absorption solar collectors10.1016/j.est.2019.100793 ↗
13. Experimental study on photovoltaic/thermal system performance based on microencapsulated phase change material slurry
14. Experimental study of jet impingement heat transfer with microencapsulated phase change material slurry10.1016/j.applthermaleng.2021.116588 ↗
15. Thermal performance enhancement methods of phase change materials for thermal energy storage systems – a review
16. Size controlled lauric acid/silicon dioxide nanocapsules for thermal energy storage10.1016/j.solmat.2018.11.019 ↗
17. Thermally-enhanced nanoencapsulated phase change materials for latent functionally thermal fluid10.1016/j.ijthermalsci.2020.106619 ↗
18. Effect of surfactant on functionalized multi-walled carbon nano tubes enhanced salt hydrate phase change material10.1016/j.est.2022.105654 ↗
19. Polypyrrole coated carbon nanotube aerogel composite phase change materials with enhanced thermal conductivity, high solar-/electro- thermal energy conversion and storage10.1016/j.jcis.2022.09.103 ↗
20. Effect of carbon nanotube and microencapsulated phase change material utilization on the thermal energy storage performance in UV cured (photoinitiated) unsaturated polyester composites10.1016/j.est.2023.106780 ↗
21. Enhancing solar photothermal conversion and energy storage with titanium carbide (Ti3C2) MXene nanosheets in phase-change microcapsules10.1016/j.jcis.2023.07.114 ↗
22. Thermo-optical performance of bare laser-synthesized TiN nanofluids for direct absorption solar collector applications
23. Preparation and characteristics optimization of octadecanoic acid/octadecanol/expanded graphite based composite phase change materials for energy storage10.1016/j.est.2022.105598 ↗
24. Synthesis and thermal properties of 1-octadecanol/nano-TiO2/carbon nanofiber composite phase change materials for thermal energy storage10.1016/j.matchemphys.2021.125041 ↗
25. Ultrasonic synthesis and characterization of polystyrene/n-dotriacontane composite nanoencapsulated phase change material for thermal energy storage10.1016/j.apenergy.2014.06.056 ↗
26. Micro/nano-encapsulated n-heptadecane with polystyrene shell for latent heat thermal energy storage10.1016/j.solmat.2014.03.023 ↗
27. Development and characterization of smart double-layer nanofiber mats based on potato starch-turnip peel anthocyanins and guar gum-cinnamaldehyde10.1016/j.foodchem.2023.137462 ↗
28. Adsorption of Cu2+ by UV aged polystyrene in aqueous solution10.1016/j.ecoenv.2022.113292 ↗
29. Preparation of reduced graphene oxide modified magnetic phase change microcapsules and their application in direct absorption solar collector10.1016/j.solmat.2020.110695 ↗