Thermomechanical characterization of brazed SiC assemblies for receivers of CSP plants
Source abstract
Abstract
In order to increase the performance of solar tower power plants, it is necessary to improve the receivers in order to reach higher temperatures or a longer life span. Silicon carbide is a promising material for this purpose, but large parts cannot be made in one piece: a joining process is required. BraSiC® brazing alloys have been developed to produce silicon carbide assemblies that can withstand temperatures of about 1000 °C, but their thermomechanical behavior is poorly understood. The understanding of the failure mechanisms as well as the knowledge of the limits of use of these materials is essential to be able to produce reliable receivers. In this article, two types of BraSiC® braze have been studied: CEA 0 and CEA 1, using the IMPACT test bench, specifically developed to characterize materials under concentrated solar flux. The results show that the CEA 1 braze is more resistant to thermomechanical stresses. Two damage mechanisms of the brazed joints were also identified using acoustic emission.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photovoltaic System Optimization Techniques · Silicon and Solar Cell Technologies · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. IEA · 2021
2. 2022
3. Bojek · 2021
4. Solar thermal power plants
5. A review of studies on central receiver solar thermal power plants10.1016/j.rser.2013.02.017 ↗
6. Theoretical and experimental performance analysis of a fresnel type solar concentrator10.1016/j.renene.2016.09.038 ↗
7. Dish stirling technology: A 100 MW solar power plant using hydrogen for Algeria10.1016/j.ijhydene.2010.12.114 ↗
8. Study on some aspects of stirling engine: A path to solar stirling engines
9. Parabolic-trough solar collectors and their applications10.1016/j.rser.2010.03.012 ↗
10. Solar energy
11. Absorber materials for solar thermal receivers in concentrating solar power (CSP) systems
12. Meucci · 2017
13. M. Bougoin, C. Coatantiec, J. Lavenac, V. Costes, A New Technological Step for Sic Mirrors Preparing OTOS, Tenerife, Canary Islands, Spain, 2017, p. 38.10.1117/12.2304098 ↗
14. Eustathopoulos · 1999
15. Gasse · 1996
16. Rado · 1997
17. F. Moret, P. Sire, A. Gasse, Non-reactive BraSiC® alloys for the brazing of SiC heat exchangers components, in: Proceedings of the International Conference on Brazing, High Temperature Brazing and Diffusion Bonding, 1998.
18. Influence of atmosphere on the wettability of α-SiC by non-reactive Cu-Si alloys10.1007/BF00278110 ↗
19. Wetting and bonding of Ni-Si alloys on silicon carbide10.1016/S1359-6454(98)00374-7 ↗
20. Wetting and adhesion on metal-silicon carbide systems: the effect of surface polarity of SiC
21. HREM of CoSi2/SiC heterophase interface: Facts and artifacts in the interface distance profile measurements10.1016/S0304-3991(00)00023-1 ↗
22. Bonding and wetting in non-reactive metal/SiC systems: weak or strong interfaces10.1016/S0921-5093(99)00274-9 ↗
23. Mechanisms of reactive wetting : the wetting to non-wetting case10.1016/S1359-6462(99)00207-9 ↗
24. Influence of oxygen partial pressure on the wetting of SiC by a co-si alloy10.1016/j.msea.2007.11.090 ↗
25. Survey on wetting of SiC by molten metals10.1016/j.ceramint.2010.01.001 ↗
26. Mechanical properties and failure criterion of silicon-based joints10.1002/9780470944127.ch12 ↗
27. V. Chaumat, G. Roux, Multi-Staged Brazing Using the BraSiC ® Process for the Fabrication of Very Large and / or Complexe SiC Based Components., in: Proceedings of the International Conference on Brazing, High Temperature Brazing and Diffusion Bonding, Aachen, Germany, 2013.
28. Bond failure of a SiC/SiC brazed assembly10.1016/j.mechmat.2012.03.001 ↗
29. C. Leray, A. Ferriere, A. Toutant, G. Olalde, J.-Y. Peroy, P. Chéreau, M. Ferrato, Design and proof of concept of an innovative very high temperature ceramic solar absorber, in: SOLARPACES 2016: International Conference on Concentrating Solar Power and Chemical Energy Systems, Abu Dhabi, United Arab Emirates, 2017, 030032.10.1063/1.4984375 ↗
30. Nguyen · 2011
31. 269. Test geometry and its effect on graphite flexural strengths in four-point bending10.1016/0008-6223(82)90688-1 ↗
32. Effect of boundary conditions on tensile bending strength of glass under four-point bending10.1016/j.conbuildmat.2023.131479 ↗
33. Theory of the tensile test10.1016/0001-6160(67)90211-8 ↗
34. Successes and challenges in non-destructive testing of aircraft composite structures10.1016/j.cja.2019.09.017 ↗
35. 2008
36. IMPACT: A novel device for in-situ thermo-mechanical investigation of materials under concentrated sunlight10.1016/j.solmat.2017.07.002 ↗
37. Damage monitoring and identification in SiC/SiC minicomposites using combined acousto-ultrasonics and acoustic emission10.1016/j.compositesa.2013.10.010 ↗
38. Damage monitoring of carbon fiber reinforced silicon carbide composites under random vibration environment by acoustic emission technology10.1016/j.ceramint.2020.04.218 ↗
39. Unsupervised and supervised classification of AE data collected during fatigue test on CMC at high temperature10.1016/j.compositesa.2011.10.016 ↗
40. Marec · 2009
41. Validation of acoustic emission (AE) crack detection in aerospace grade steel using digital image correlation10.4028/www.scientific.net/AMM.24-25.221 ↗
42. Acoustic emission signatures of fatigue damage in idealized bevel gear spline for localized sensing10.3390/met7070242 ↗
43. Aging of solar absorber materials under highly concentrated solar fluxes10.1016/j.solmat.2014.01.010 ↗
44. Maex · 1995 · vol. 14
45. Relation between amplitude and duration of acoustic emission signals
46. Hsu · 1977
47. Ultrasonic transducers for materials testing and their characterization10.1016/B978-0-12-477914-3.50009-8 ↗
48. Application of wavelet transform in evaluating the kaiser effect of rocks in acoustic emission test10.1016/j.measurement.2022.110887 ↗
49. Acoustic emission for fatigue damage characterization in metal plates10.1016/j.mechrescom.2011.01.011 ↗
50. Detection and evaluation of AE waves due to rock deformation10.1016/S0950-0618(00)00073-8 ↗
51. Clustering methodology for the evaluation of acoustic emission from composites