journal article·2024-03Open access

Optimizing solar cell metallization by parallel dispensing

Sophie Pordan, Max Mosig, Florian Heitmann, Melanie Palme, Niklas Heuser, Maximilian Weil, Richard Steffens, Omar Zuaiter, Martin Kuchler, Maximilian Pospischil

Abstract

Dispensing of metal pastes shows impressive performance and promises higher throughput with lower metal laydown than screen printing. Given the market introduction planned for latest 2024, and with the objective to fully automate the metallization process, an in-line visual control and inspection unit is being developed. Utilizing this tool, process time and paste laydown was reduced by another 10 % and 20 % respectively, after optimization within four consecutive cells only. Consequently, recent cell results on industrial precursor SHJ showed an increased efficiency by +0.4 %_"abs“ while having a reduction in paste usage of 40 %, compared to the screen printing reference. In this paper, we outline the path of development with a focus on first results with this new digital tool that has the potential to lift future PV metallization to a completely automated production state with higher performance, yield values and lower downtimes.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Printing technologies for silicon solar cell metallization: a comprehensive review10.1002/pip.3674 ↗
2. Vdma · 2022
3. Design considerations for multi-terawatt scale manufacturing of existing and future photovoltaic technologies: challenges and opportunities related to silver, indium and bismuth consumption10.1039/D1EE01814K ↗
4. Process development for a high-throughput fine line metallization approach based on dispensing technology10.1016/j.egypro.2014.02.001 ↗
5. Dispensing technology on the route to an industrial metallization process10.1016/j.egypro.2015.03.297 ↗
6. Paste rheology correlating with dispensed finger geometry10.1109/JPHOTOV.2013.2278657 ↗
7. M. Pospischil, J. Specht, H. Gentischer et al., “Correlations between finger geometry and dispensing paste rheology,” in 27th European Photovoltaic Solar Energy Conference and Exhibition, pp. 1773–1776. .
8. Applications of parallel dispensing in PV metallization10.1063/1.5125870 ↗
9. “High speed dispensing with novel 6” print head,”10.1016/j.egypro.2016.10.081 ↗
10. Pospischil · 2017
11. 2021
12. Filament stretching during micro-extrusion of silver pastes enables an improved fine-line silicon solar cell metallization10.1038/s41598-022-16249-5 ↗
13. Filament stretching during parallel dispensing – a way to reduce silver consumption in SHJ metallization10.1016/j.solmat.2022.111871 ↗
14. Low-Temperature Ag-Paste screening for silicon heterojunction solar cells and modules
15. Fast screen printing and curing process for silicon heterojunction solar cells10.1063/5.0056429 ↗
16. Pospischil · 2016
17. The link between Ag‐paste rheology and screen‐printed solar cell metallization10.1002/admt.202000654 ↗
18. Analysis of the optical properties of screen-printed and aerosol-printed and plated fingers of silicon solar cells
19. Fine front side metallisation by stretching the dispensed silver paste filament with graphite nanofibres10.1016/j.solmat.2017.05.010 ↗
20. Paste development for an optimized filament stretching effect during parallel dispensing on transparent conductive oxide layers for solar cell metallization10.1002/adem.202300010 ↗
21. Fully automated intermittent parallel dispensing
22. Studying knotless screen patterns for fine-line screen printing of Si-solar cells10.1109/JPHOTOV.2019.2959939 ↗