Novel method for evaluation of stress assisted corrosion through compact tension specimens to assess material compatibility in latent heat thermal energy storage systems
Source abstract
Abstract
The next generation Concentrated Solar Power (CSP) plants integrated with Thermal Energy Storage (TES) offer a promising solution for dispatchability, reliability, and economic concerns associated with renewable energy technologies. However, the expected operational life of up to 30 years proves to be a major challenge due to the impact of high temperatures and corrosive eutectic salts utilised in the latent heat TES systems. Additionally, the system is under varying degrees of stress that can accelerate corrosion mechanisms. Unfortunately, this stress corrosion relationship is often neglected during the material compatibility assessment. This study utilises a novel static immersion testing approach with three designs of modified Compact Tension (CT) specimens manufactured from AISI 316L to investigate the interaction of alloys under stress with various eutectic salts at up to 750 °C for up to 1000 Hours. The results indicate that oxidation is accelerated up to four times and Intergranular Corrosion (IGC) up to two times in the high-stress region of the test samples. Furthermore, the findings suggest that static immersion testing using CT specimens can be regarded as an effective approach to assess the influence of stress on corrosion and conduct a reliable material assessment for latent heat TES systems and CSP plants.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Solar Energy Systems and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Techno-economic assessment of a high-efficiency, low-cost solar-thermal power system with sodium receiver, phase-change material storage, and supercritical CO2 recompression Brayton cycle10.1016/j.solener.2020.01.004 ↗
2. A comprehensive review of thermal energy storage10.3390/su10010191 ↗
3. Design of sensible and latent heat thermal energy storage systems for concentrated solar power plants: thermal performance analysis10.1016/j.renene.2019.11.115 ↗
4. Li · 2021 · 191
5. Molten chloride salts for next generation concentrated solar power plants: mitigation strategies against corrosion of structural materials10.1016/j.solmat.2018.12.020 ↗
6. Thermophysical properties experimentally tested for NaCl-KCl-MgCl2 eutectic molten salt as a next-generation high-temperature heat transfer fluids in concentrated solar power systems10.1115/1.4049253 ↗
7. Materials compatibility for the next generation of Concentrated Solar Power plants10.1016/j.ensm.2018.02.023 ↗
8. Control of welding residual stress for ensuring integrity against fatigue and stress–corrosion cracking10.1016/j.nucengdes.2006.05.006 ↗
9. Combined effects of machining-induced residual stress and external load on SCC initiation and early propagation of 316 stainless steel in high temperature high pressure water10.1016/j.corsci.2021.109644 ↗
10. Effect of material non-homogeneity on the inhomogeneous shearing deformation of a Gent slab subjected to a temperature gradient10.1016/S0020-7462(02)00075-6 ↗
11. Corrosion resistance of iron-chromium-aluminium steel in eutectic molten salts under thermal cycling conditions10.1016/j.corsci.2020.108798 ↗
12. Stress calculations of heat storage tanks10.3390/ma15051647 ↗
13. Review of commercial thermal energy storage in concentrated solar power plants: steam vs. molten salts10.1016/j.rser.2017.05.084 ↗
14. Xu · 2022
15. Alloying effects in high temperature molten salt corrosion10.1016/j.corsci.2021.110003 ↗
16. Corrosion in molten salts
17. Huang · 2018
18. Lai · 2007
19. Introduction
20. Intergranular to intragranular pitting corrosion transition mechanism of sensitized AA5083 at 150 °C10.3390/met10081082 ↗
21. Electrochemical Corrosion Studies in Molten Chloride Salts10.1149/1945-7111/ac735b ↗
22. 3 - testing and evaluation methods for stress corrosion cracking (SCC) in metals
23. Effect of static liquid Galinstan on common metals and non-metals at temperatures up to 200° C10.1139/cjc-2020-0227 ↗
24. Overview of corrosion and protection strategies
25. Influence of graphite-alloy interactions on corrosion of Ni-Mo-Cr alloy in molten fluorides10.1016/j.jnucmat.2018.03.001 ↗
26. High-temperature corrosion behavior of superalloys in molten salts – a review10.1080/10408436.2016.1243090 ↗
27. Pitting corrosion mechanism of Cl−- and S2−-induced by oxide inclusions in Fe-based amorphous metallic coatings10.1016/j.surfcoat.2020.125449 ↗
28. Oxidation and hot corrosion of metals and alloys
29. Talbot · 2018
30. Breakdown and evolution of the protective oxide scales of AISI 304 and AISI 316 stainless steels under high-temperature oxidation10.1155/2011/824676 ↗
31. Corrosion mechanisms in chloride and carbonate salts
32. A comparative study on the high temperature corrosion of TP347H stainless steel, C22 alloy and laser-cladding C22 coating in molten chloride salts10.1016/j.corsci.2014.03.012 ↗
33. Intergranular corrosion susceptibility in supermartensitic stainless steel weldments10.1016/j.corsci.2009.06.009 ↗
34. Intergranular corrosion of Ti-stabilized 11 wt% Cr ferritic stainless steel for automotive exhaust systems10.1016/j.corsci.2009.07.008 ↗
35. SKPFM measured Volta potential correlated with strain localisation in microstructure to understand corrosion susceptibility of cold-rolled grade 2205 duplex stainless steel10.1016/j.corsci.2015.06.035 ↗
36. Emergence of micro-galvanic corrosion in plastically deformed austenitic stainless steels10.1016/j.matdes.2021.109614 ↗
37. Effect of SO42− on the corrosion of 316L stainless steel in molten FLiNaK salt10.1016/j.corsci.2018.08.057 ↗
38. Intergranular corrosion/cracking of weldable 13% Cr steel at elevated temperature
39. Effects of ageing conditions on the precipitates evolution, chromium depletion and intergranular corrosion susceptibility of AISI 316L: experimental and modeling results10.1016/j.msea.2003.12.017 ↗
40. Microstructure and intergranular corrosion of the austenitic stainless steel 1.497010.1016/j.jnucmat.2006.06.010 ↗
41. Damage mechanism in austenitic steel during high temperature cyclic loading with dwells10.1016/j.ijfatigue.2018.02.017 ↗
42. Thermal cycling induced stress–assisted sigma phase formation in super duplex stainless steel10.1016/j.matdes.2019.108003 ↗
43. Diffusion processes as possible mechanisms for Cr depletion at SCC crack tip
44. The effect of residual stress on the preferential intergranular oxidation of alloy 60010.1016/j.corsci.2016.05.022 ↗
45. Effect of deformation-induced phase transformation on AISI 316 stainless steel corrosion resistance10.1016/j.engfailanal.2017.05.031 ↗
46. International · 2021
47. Residual stress driven creep cracking in AISI Type 316 stainless steel10.1016/j.actamat.2008.03.045 ↗
48. Size and geometry effects in notched compact tension specimens10.1016/j.ijpvp.2017.05.012 ↗
49. 2014
50. Fatigue of structural adhesives under stress concentrations: notch effect on fatigue strength, crack initiation and damage evolution10.1016/j.ijfatigue.2020.105824 ↗
51. Stress assisted oxidative failure of Inconel 601 for thermal energy storage10.1016/j.solmat.2016.10.008 ↗
52. Corrosion mechanism of SS316L exposed to NaCl/Na2CO3 molten salt in air and argon environments10.1016/j.corsci.2021.109966 ↗
53. Corrosion testing under inert atmosphere with stainless steel crucibles10.1063/1.5117719 ↗
54. High-temperature corrosion behaviour of metal alloys in commercial molten salts10.1016/j.solener.2020.03.010 ↗
55. Estimating the sample mean and standard deviation from the sample size, median, range and/or interquartile range10.1186/1471-2288-14-135 ↗
56. Gillard · 2020
57. The correlation between effective renal plasma flow (ERPF) and glomerular filtration rate (GFR) with renal scintigraphy 99mTc-DTPA study
58. Relationship between the parting limit for de-alloying and a particular geometric high-density site percolation threshold10.1080/14786430903025708 ↗
59. A review of liquid metal embrittlement: cracking open the disparate mechanisms10.1007/s11661-021-06256-y ↗
60. Influences of Mo on stress corrosion cracking susceptibility of newly developed FeCrMnNiNC-based lean austenitic stainless steels10.1016/j.matchar.2016.08.006 ↗
61. High-temperature corrosion performance of austenitic stainless steels type AISI 316L and AISI 321H, in molten Solar Salt10.1016/j.solener.2018.11.019 ↗
62. Corrosion of high temperature alloys in solar salt at 400, 500, and 680ÀC
63. Experimental evaluation of the thermal degradation of solar salt under different gas covers10.1016/j.est.2023.108412 ↗
64. Stabilization of Solar Salt at 650° C–Thermodynamics and practical implications for thermal energy storage systems10.1016/j.solmat.2023.112411 ↗