journal article·2023-10

Fundamental microscopic studies on the etching behavior of silver pastes on poly-Si/SiOx passivating contacts

Raphael Glatthaar, Beatriz Cela Greven, Tobias Okker, Frank Huster, Giso Hahn, Barbara Terheiden

Publisher page

Abstract

Screen printing of Ag paste is a key process for implementing polycrystalline-silicon/silicon oxide (poly-Si/SiO x ) passivating contacts in industrial solar cells. Thereby, the formation of Ag crystallites on the Si surface is crucial for a low-ohmic contact. Recently, it has been observed that Ag crystallites are predominantly formed within the poly-Si layer and stop at the thermal SiO x, thermal interface, causing a cuboidal shape. To avoid a direct contact of the Ag crystallites with the underlying SiO x, thermal /crystalline-Si (c-Si) interface, a multilayer approach with interlayer SiO x, inter between several poly-Si layers is presented. A stack of three 50 nm poly-Si layers achieves highest cell potential. Further, the metallization process parameters are scanned to check when this cuboidal Ag crystallite shape occurs. While different amorphous-silicon (a-Si) deposition techniques show no changes, there are strong indications that the glass frit etching is responsible for a different etching mechanism causing the breakdown of the SiO x stop.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Passivating contacts and tandem concepts: approaches for the highest silicon-based solar cell efficiencies10.1063/1.5139202 ↗
2. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
3. Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses10.1038/s41560-021-00805-w ↗
4. Screen printable, non-fire-through copper paste applied as busbar metallization for back contact solar cells
5. Printing technologies for silicon solar cell metallization: a comprehensive review10.1002/pip.3674 ↗
6. Investigation of contact formation mechanism and application of copper-based front contact paste for crystalline silicon solar cells10.1016/j.solmat.2023.112213 ↗
7. The formation mechanism for printed silver-contacts for silicon solar cells10.1038/ncomms11143 ↗
8. Role of PbO-based glass frit in Ag thick-film contact formation for crystalline Si solar cells10.1007/s12540-009-0307-1 ↗
9. Schubert · 2006
10. Mechanism for the formation of Ag crystallites in the Ag thick-film contacts of crystalline Si solar cells10.1016/j.solmat.2008.10.021 ↗
11. Attenuation of short‐circuit effect along screen‐printed silver gridlines during the contact firing process of crystalline silicon solar cells10.1002/pip.3603 ↗
12. Hörteis · 2009
13. Contact formation of silver paste and atmospheric pressure chemical vapor deposition (n) poly‐silicon passivating contacts on planar and textured surfaces10.1002/pssa.202200501 ↗
14. Glatthaar · 2023
15. Synergistic efficiency gain analyses for the photovoltaic community: an easy to use SEGA simulation tool for silicon solar cells
16. A free and fast three-dimensional/two-dimensional solar cell simulator featuring conductive boundary and quasi-neutrality approximations10.1109/TED.2012.2231415 ↗
17. Effect of Pb-Te-Si-O glasses on Ag thick-film contact in crystalline silicon solar cells