journal article·2023-06Open access

Poly-Si passivating contacts prepared via phosphorus spin-on-doping: A comparison between different silicon deposition methods

Jesús Ibarra Michel, Di Yan, Sieu Pheng Phang, Tian Zheng, Brett C. Johnson, Jie Yang, Xinyu Zhang, Wenhao Chen, Yimao Wan, Thien Truong, Josua Stuckelberger, Yida Pan, Daniel Macdonald, James Bullock

Abstract

Polycrystalline silicon-based (poly-Si) passivating contacts are a promising technology for the next generation of high-efficiency crystalline silicon solar cells. Ex-situ doping via spin-on-dopant solutions is a potential method to fabricate patterned poly-Si contacts, like those used in interdigitated back contact architectures. This study compares the performance of phosphorous doped poly-Si passivating contacts fabricated from different industry-compatible intrinsic silicon films and a spin-on-dopant process. We explore the influence of the grain size on the electrical quality of the poly-Si films and find a correlation between larger grain size and lower contact recombination and resistivity. The best results are achieved with low-pressure chemical vapor deposited poly-Si films, reaching an implied open circuit voltage iVoc of 730 mV, followed by plasma-enhanced chemical vapor deposited films with an iVoc of 700 mV. Both films also produced low contact resistivities of <50 mΩ-cm2. For the case of physical vapor deposition (sputtered) poly-Si films, which are found to have the smallest crystalline features, a low iVoc of 625 mV was measured, attributed to a low active dopant concentration within the poly-Si film. This study informs researchers looking to use spin-on-dopants in terms of the poly-Si layer deposition method and the optimal temperature profiles for the process.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Polysilicon passivated junctions: the next technology for silicon solar cells?10.1016/j.joule.2021.02.013 ↗
2. Solution-doped polysilicon passivating contacts for silicon solar cells10.1021/acsami.0c22127 ↗
3. Phosphorus-doped polycrystalline silicon passivating contacts via spin-on doping
4. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
5. Silicon doping from phosphorus spin‐on dopant sources in proximity rapid thermal diffusion10.1063/1.355855 ↗
6. Advantages of ion-implantation for solar cells
7. Effect of high-temperature annealing on ion-implanted silicon solar cells10.1155/2012/921908 ↗
8. High efficiency N-type silicon solar cells with passivating contacts based on PECVD silicon films doped by phosphorus diffusion10.1016/j.solmat.2019.01.005 ↗
9. Diaz Leon · 2021
10. Influences of deposition and crystallization kinetics on the properties of silicon films deposited by low-pressure chemical vapour deposition from silane and disilane10.1016/j.tsf.2010.07.037 ↗
11. Dopant segregation in polycrystalline silicon10.1063/1.327582 ↗
12. Grain boundary segregation in silicon heavily doped with phosphorus and arsenic10.1051/jphyscol:1982125 ↗
13. Grain boundary diffusion of phosphorus in polycrystalline silicon10.1116/1.571713 ↗
14. Scanning transmission electron microscope microanalytical study of phosphorus segregation at grain boundaries in thin‐film silicon10.1063/1.93368 ↗
15. Passivation of paramagnetic Si‐SiO2 interface states with molecular hydrogen10.1063/1.100620 ↗
16. Passivation and depassivation of silicon dangling bonds at the Si/SiO 2 interface by atomic hydrogen10.1063/1.110758 ↗
17. Passivation of P b 0 and P b 1 interface defects in thermal (100) Si/SiO 2 with molecular hydrogen10.1063/1.116308 ↗
18. Contactless determination of current–voltage characteristics and minority‐carrier lifetimes in semiconductors from quasi‐steady‐state photoconductance data10.1063/1.117723 ↗
19. Ohmic contacts for GaAs devices10.1016/0038-1101(67)90063-9 ↗
20. Inaccuracies in contact resistivity from the cox–strack method: a review10.1016/j.solmat.2022.111909 ↗
21. Spreading resistance modeling for contact resistivity extraction in ohmic multilayer structures with circular electrodes10.1109/TED.2021.3117187 ↗
22. The scherrer formula for X-ray particle size determination10.1103/PhysRev.56.978 ↗
23. Numerical simulation of carrier-selective electron contacts featuring tunnel oxides10.1109/JPHOTOV.2015.2455346 ↗
24. Role of polysilicon in poly-Si/SiOx passivating contacts for high-efficiency silicon solar cells10.1039/C9RA03560E ↗
25. Polysilicon passivating contacts for silicon solar cells: interface passivation and carrier transport mechanism10.1021/acsaem.8b02149 ↗
26. Nasebandt, L.; Min, B.; Hollemann, C.; Hübner, S.; Dippell, T.; Peibst, R.; Brendel, R. Sputtered Phosphorus-Doped Poly-Si on Oxide Contacts for Screen-Printed Si Solar Cells. Solar RRL n/a (n/a). https://doi.org/10.1002/solr.202200409.10.1002/solr.202200409 ↗
27. Properties of furnace crystallized polysilicon films prepared by r.f. Sputtering10.1016/S0040-6090(96)08861-X ↗
28. Voutsas, T.; Nishiki, H.; Atkinson, M.; Hartzell, J.; Nakata, Y. Sputtering Technology of Si Films for Low-Temperature Poly-Si TFTs.
29. Linke · 2019
30. 23% efficient P-type crystalline silicon solar cells with hole-selective passivating contacts based on physical vapor deposition of doped silicon films10.1063/1.5037610 ↗
31. Phosphorus diffusion in polycrystalline silicon10.1063/1.333166 ↗
32. Morphology, microstructure, and doping behaviour: a comparison between different deposition methods for poly-Si/SiOx passivating contacts10.1002/pip.3411 ↗
33. Thermal-induced normal grain growth mechanism in LPCVD polysilicon film10.1016/j.mssp.2004.10.003 ↗
34. Growth and physical properties of LPCVD polycrystalline silicon films10.1149/1.2115672 ↗
35. Separating the two polarities of the POLO contacts of an 26.1%-efficient IBC solar cell10.1038/s41598-019-57310-0 ↗