Control of Ag deposition for improvement of specular reflection in Ag deposition-based electrochemical mirror through modulation of electrolysis condition
Source abstract
Abstract
The reflection behavior of an Ag deposition-based reversible electrochemical mirror is determined by the morphology of the electrodeposited Ag. This study demonstrates the control of the morphology of Ag deposits through the modulation of the electrolysis conditions, specifically the applied potential and Ag + ions concentration, without increasing the amount of Ag deposits. By applying a potential with a sufficiently large deposition overpotential for continuous deposition on the electrode surface, the deposited Ag formed a flat surface, resulting in high reflectivity . Considering the concentration dependence of Ag + ions, the diffusion of Ag + ions to the electrode significantly affected the resulting morphology of the deposits. At higher Ag + concentrations, the time for the transition to a diffusion-limited process increased because Ag + ions were close to the working electrode. Therefore, a flat Ag layer was obtained due to the promotion of three-dimensional deposition, including the in-plane growth.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Chalcogenide Semiconductor Thin Films · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Photochromism: memories and SwitchesIntroduction10.1021/cr980068l ↗
2. Photochromism and thermochromism of Schiff bases in the solid state: structural aspects
3. Designed, flexible electrochromic display device with Fe(II)-Based metallo-supramolecular polymer using mechanically etched ITO film10.2494/photopolymer.34.175 ↗
4. Multicolored electrochromisin in polymers: structures and devices10.1021/cm049669l ↗
5. Electrochromism of polyaniline film prepared by electrochemical polymerization10.1021/ma00174a015 ↗
6. Double-sided electrochromic device based on metal-organic frameworks10.1021/acsami.7b13647 ↗
7. Electrochromic tungsten oxide films: review of progress 1993-199810.1016/S0927-0248(99)00088-4 ↗
8. Electrochromic systems and the prospects for devices10.1002/1521-4095(200106)13:11<783::AID-ADMA783>3.0.CO;2-D ↗
9. Nanomaterials-based electrochromics for paper-quality displays10.1002/1521-4095(20020605)14:11<845::AID-ADMA845>3.0.CO;2-8 ↗
10. Metal-oxide films for electrochromic applications: present technology and future directions10.1039/c0jm00604a ↗
11. Electrochromics for smart windows: thin films of tungsten oxide and nickel oxide, and devices based on these10.1039/B612174H ↗
12. Switchable mirrors based on nickel-magnesium films10.1063/1.1371959 ↗
13. A novel organic electrochromic device with hybrid capacitor architecture towards multicolour representation10.1039/C8CP02274G ↗
14. Synthesis of a perylenediimide-viologen dyad (PDI-2V) and its electrochromism in a layer-by-layer self-assembled multilayer film with PEDOT:PSS10.1039/c2jm31407j ↗
15. Viologen-based electrochromic materials and devices10.1039/C9TC00416E ↗
16. Crystalline WO3 nanoparticles for highly improved electrochromic applications10.1002/adma.200501953 ↗
17. Novel prussian white@MnO2-based inorganic electrochromic energy storage devices with integrated flexibility, multicolor, and long life10.1021/acsami.2c12484 ↗
18. Electrochromic properties of porous NiO thin films prepared by a chemical bath deposition10.1016/j.solmat.2008.01.009 ↗
19. Emerging Zn anode-based electrochromic devices10.1002/smsc.202100040 ↗
20. A copper-based reversible electrochemical mirror device with switchability between transparent, blue, and mirror states10.1039/C7TC01070B ↗
21. Bi-based electrochromic cell with mediator for white/black imaging10.1016/j.solmat.2009.05.001 ↗
22. Hybrid dynamic windows using reversible metal electrodeposition and ion insertion10.1038/s41560-019-0332-3 ↗
23. Electrolyte for improved durability of dynamic windows based on reversible metal electrodeposition10.1016/j.joule.2020.05.008 ↗
24. Dynamic windows with neutral color, high contrast, and excellent durability using reversible metal electrodeposition10.1016/j.joule.2017.06.001 ↗
25. An improvement in the coloration properties of Ag deposition-based plasmonic EC devices by precise control of shape and density of deposited Ag nanoparticles10.1039/D0NR05196A ↗
26. A localized surface plasmon resonance-based multicolor electrochromic device with electrochemically size-controlled silver nanoparticles10.1002/adma.201205214 ↗
27. Multicolor electrochromism showing three primary color states (cyan-magenta-yellow) based on size- and shape-controlled silver nanoparticles10.1021/cm5039039 ↗
28. Electrochemical optical-modulation device with reversible transformation between transparent, mirror, and black
29. Chromatic characterization of novel multicolor reflective display with electrochemically size-controlled silver nanoparticles10.1002/jsid.191 ↗
30. Chromatic control of multicolor electrochromic device with localized surface plasmon resonance of silver nanoparticles by voltage-step method10.1016/j.solmat.2015.07.034 ↗
31. Coloration mechanisms of Ag deposition-based multicolor electrochromic device investigated by morphology of Ag deposit and its optical properties10.1002/jsid.451 ↗
32. The effect of a polymer capping agent on electrodeposited silver nanoparticles in a silver deposition-based electrochromic device10.1039/D3CP06281C ↗
33. Analysis for coloration mechanism of reversible silver deposition-based electrochromic device by in situ observation of plasmonic nanoparticles with dark-field microscopy10.1016/j.solmat.2022.112119 ↗
34. Theory and design principles of the reversible electroplating light modulator10.1149/1.2425204 ↗
35. Silver electrodeposition from room temperature ionic liquid electrolytes10.1149/08504.0121ecst ↗
36. Reversible electrochromic system based on aqueous solution containing silver10.1016/S0013-4686(01)00401-7 ↗
37. Compensative electrochromic device utilizing electro-deposited plasmonic silver nanoparticles and manganese oxide to achieve retention of chromatic color10.5796/electrochemistry.22-00006 ↗
38. Bistable silver electrodeposition-based EC device with a Prussian blue counter electrode to maintain the mirror state without power supply10.1016/j.solmat.2019.110247 ↗
39. Bistable black electrochromic windows based on the reversible metal electrodeposition of Bi and Cu10.1021/acsenergylett.7b01072 ↗
40. Understanding and improving mechanical stability in electrodeposited Cu and Bi for dynamic windows based on reversible metal electrodeposition10.1002/aenm.202202843 ↗
41. Degradation analysis of electrochromic switchable mirror glass based on Mg-Ni thin film at constant temperature and relative humidity10.1143/JJAP.50.105801 ↗
42. Fabrication of solid electrolyte Ta 2 O 5 thin film by reactive dc magnetron sputtering suitable for electrochromic all-solid-state switchable mirror glass10.2109/jcersj2.119.76 ↗
43. Electrochromic switchable mirror glass fabricated using adhesive electrolyte layer10.1063/1.4772938 ↗
44. Si incorporated diamond-like carbon film-coated electrochromic switchable mirror glass for high environmental durability10.1016/j.ceramint.2013.03.096 ↗
45. Switchable mirror glass with a Mg-Zr-Ni ternary alloy thin film10.1016/j.solmat.2013.07.016 ↗
46. Improved durability of electrochromic switchable mirror with surface coating in environment10.1016/j.vacuum.2012.08.003 ↗
47. Specular reflectivity from pyramidal surface morphologies10.1016/S0921-4526(03)00281-3 ↗
48. Effect of plating temperature on Sn surface morphology10.1016/j.matlet.2010.04.036 ↗
49. Electrochemical preparation of silver and gold nanoparticles: characterization by confocal and surface enhanced Raman microscopy10.1016/j.susc.2004.02.042 ↗
50. Preparation of silver nanoparticles on ITO surfaces by a double-pulse method10.1016/S0022-0728(00)00301-6 ↗
51. Double-pulse technique as an electrochemical tool for controlling the preparation of metallic nanoparticles10.1016/S0013-4686(02)00683-7 ↗
52. The structure of evaporated metal films and their optical properties10.1364/JOSA.40.000203 ↗
53. Planar diffusion to macro disc electrodes—what electrode size is required for the Cottrell and Randles-Sevcik equations to apply quantitatively?10.1007/s10008-014-2664-z ↗
54. Diffusion to fractal surfaces-II. Verification of theory10.1016/0013-4686(89)87082-3 ↗
55. Electrodeposition of vertically aligned silver nanoplate arrays on indium tin oxide substrates10.1021/acs.jpcc.5b05109 ↗