Enhancing the performance of CZTSSe solar cells via an alternate spin-coating process with DMSO and DMF
Source abstract
Abstract
The CZTSSe absorber layer prepared with DMSO exhibits extensive cavities at its bottom, and a prominent double-layer structure is frequently observed within the CZTSSe absorber synthesized using DMF, both of which have a detrimental impact on the device performance. In this paper, an alternate spin-coating process using DMSO and DMF solvent systems is proposed, which eliminates the double-layer structure of CZTSSe and reduces the number of cavities at the bottom of the absorber layer, thereby enhancing its overall quality. This method outperforms the traditional single-solution spin-coating technique by combining the advantages of two solvent systems, allowing for the preparation of an ideal CZTSSe film without disturbing the elemental ratio, ultimately resulting in a single-layer absorber composed of large grains. After three repetitions of an identical alternate spin-coating process, the average grain size of the absorber layer increased from 0.83 to 1.21 μm. This innovative process leads to a reduction in carrier recombination and an improvement in the short-circuit current density, ultimately raising the photoelectric conversion efficiency from 7.40% to 8.88%.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Advanced Semiconductor Detectors and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Passivating SnZn defect and optimizing energy level alignment via organic silicon salt incorporation toward efficient solution-processed CZTSSe solar cells
2. Eliminating multi-layer crystallization of Cu2ZnSn(S,Se)4 absorber by controlling back interface reaction10.1016/j.nanoen.2020.105042 ↗
3. Control of the phase evolution of kesterite by tuning of the selenium partial pressure for solar cells with 13.8% certified efficiency10.1038/s41560-023-01251-6 ↗
4. Influencing mechanism of the selenization temperature and time on the power conversion efficiency of Cu2ZnSn(S,Se)4-based solar cells10.1021/acsami.6b05201 ↗
5. Tailoring the defects and carrier density for beyond 10% efficient CZTSe thin film solar cells10.1016/j.solmat.2016.09.034 ↗
6. Compositional inhomogeneity of multinary semiconductor nanoparticles: a case study of Cu2ZnSnS410.1021/cm502930d ↗
7. N-type surface design for p-type CZTSSe thin film to attain high efficiency10.1002/adma.202104330 ↗
8. P-type quaternary chalcogenides of Cu2ZnSn(S,Se)4 nanocrystals: large-scale synthesis, bandgap engineering and their thermoelectric performances10.1016/j.jallcom.2017.12.204 ↗
9. Solution-based synthesis of kesterite thin film semiconductors
10. DMF-based large-grain spanning Cu2ZnSn(Sx,Se1-x)4 device with a PCE of 11.76%10.1002/advs.202201241 ↗
11. Eliminating cracking morphology of solution-processed CZTSSe absorbers by Sn-rich composition engineering10.1016/j.mssp.2023.107388 ↗
12. Fabrication of Cu2ZnSnS4 solar cells with 5.1% efficiency via thermal decomposition and reaction using a non-toxic sol-gel route10.1039/C3TA13533K ↗
13. A review on pulsed laser deposited CZTS thin films for solar cell applications10.1016/j.jallcom.2014.09.018 ↗
14. Electrodeposited Cu2ZnSnSe4 thin film solar cell with 7% power conversion efficiency10.1002/pip.2332 ↗
15. Growth and device characteristics of CZTSSe thin-film solar cells with 8.03% efficiency10.1021/acs.chemmater.5b01181 ↗
16. Ag incorporation with controlled grain growth enables 12.5% efficient kesterite solar cell with open circuit voltage reached 64.2% Shockley-Queisser limit10.1002/adfm.202101927 ↗
17. Ge bidirectional diffusion to simultaneously engineer back interface and bulk defects in the absorber for efficient CZTSSe solar cells10.1002/adma.202202858 ↗
18. Unveiling the selenization reaction mechanisms in ambient air-processed highly efficient kesterite solar cells10.1002/aenm.202300521 ↗
19. Strong interplay between sodium and oxygen in kesterite absorbers: complex formation, incorporation, and tailoring depth distributions10.1002/aenm.201900740 ↗
20. Impact of Na doping on the carrier transport path in polycrystalline flexible Cu2ZnSn(S,Se)4 solar cells
21. Strategic review of secondary phases, defects and defect-complexes in kesterite CZTS-Se solar cells10.1039/C5EE02153G ↗
22. Effects of selenium atmosphere on grain growth for CZTSe absorbers fabricated by selenization of as-sputtered precursors10.1016/j.jallcom.2018.04.311 ↗
23. Influence of the selenization condition on the properties of ambient-air processed CZTSSe thin films and device performance10.1016/j.apsusc.2020.145872 ↗
24. Back contact plasma treatment enables 14.5% efficient solution-processed CuIn(S,Se)2 solar cells10.1002/adfm.202310124 ↗
25. Improvement of Cu2ZnSn(S,Se)4 solar cells by adding N,N-dimethylformamide to the dimethyl sulfoxide-based precursor ink10.1002/cssc.201803009 ↗
26. Promoting carrier collection by DMF/DMSO binary solvent for efficient kesterite solar cells10.1016/j.cej.2022.140596 ↗
27. A DMSO/MOE mixed solvent system for improving the morphology and efficiency of kesterite solar cell10.1016/j.solener.2023.04.044 ↗
28. Kesterite Cu2ZnSnS4 thin film solar cells by a facile DMF-based solution coating process10.1039/C5TC01750E ↗
29. Complexation chemistry in N,N-dimethylformamide-based molecular inks for chalcogenide semiconductors and photovoltaic devices10.1021/jacs.8b09966 ↗
30. Trace chromatographic analysis of dimethyl sulfoxide and related methylated sulfur compounds in natural waters10.1016/S0021-9673(98)00086-7 ↗
31. Improved CZTSSe thin-film morphology and device performance by using DMSO/DMF blended solvent10.1007/s00339-021-04753-w ↗
32. (NH4)2S-induced improvement of interfacial wettability for high-quality heterojunctions to boost the chloride-assembled CZTSSe solar cells10.1063/5.0113110 ↗
33. High-sulfur Cu2ZnSn(S,Se)4 films by sulfurizing as-deposited CZTSe film: the evolutions of phase, crystallinity and S/(S+Se) ratio10.1016/j.jallcom.2016.11.335 ↗
34. The enhancement of CZTSSe solar cell performance through active construction of the double-layer absorber10.1016/j.solmat.2023.112670 ↗
35. Reducing the interfacial defect density of CZTSSe solar cells by Mn substitution10.1039/C7TA09668B ↗
36. Improvement of grain growth and composition distribution of Cu2ZnSn(S,Se)4 by using chloride-based precursor solution10.1016/j.solener.2020.12.067 ↗
37. Composition dependence of structure and optical properties of Cu2ZnSn(S,Se)4 solid solutions: an experimental study10.1016/j.jallcom.2011.08.099 ↗
38. Optical and photovoltaic properties of vacuum-evaporated CZTSe, CAZTSe, and AZTSe thin films: a comparative study10.1007/s10854-021-06529-7 ↗
39. Toward high efficient Cu2ZnSn(Sx,Se1-x)4 solar cells: break the limitations of VOC and FF
40. Photo-induced optical changes in GexAs40Se60-xthin films10.1016/S1002-0071(12)60007-0 ↗
41. Enhancement of power conversion efficiency of Ag-substituted Cu2ZnSn(S,Se)4 solar cells via tuning Cu2+/(Cu++Cu2+) percentage in precursor solution10.1016/j.solmat.2023.112502 ↗
42. Efficiency enhancement of Cu2ZnSn(S,Se)4 solar cells by addition a CuSe intermediate layer between Cu2ZnSn(S,Se)4 and Mo electrode10.1016/j.jallcom.2022.165056 ↗
43. On the origin of band-tails in kesterite10.1016/j.solmat.2017.11.005 ↗
44. 10.24% efficiency of flexible Cu2ZnSn(S,Se)4 solar cells by pre-evaporation selenization technique10.1002/smll.202201347 ↗
45. Highly efficient solution-processed CZTSSe solar cells based on a convenient sodium-incorporated post-treatment method10.1016/j.jechem.2019.03.029 ↗