Regulation to Ag–Al spikes through silver aluminum paste with Al–Si alloy
Source abstract
Abstract
It is known that metallization of Ag–Al pastes to boron doped emitter of N-type solar cells will reduce contact resistance, because Al will promote forming Ag–Al spikes, providing conductive channels. However, deeper Ag–Al spikes will exacerbate metal recombination and deteriorate cell performance, thus requiring regulation. It has been reported that adding Si to Ag–Al pastes could effectively limit the formation of Ag–Al spikes, but it will increase grid line resistance and reduce conductivity. Based on this, we prepared new Ag–Al pastes using Al–Si alloys, which effectively regulated Ag–Al spikes and ensured electrical properties. In addition, we comprehensively compared the contact properties of conventional Ag–Al pastes, Ag–Al pastes with added Si, and Al–Si alloy pastes. The results indicated that conventional Ag–Al pastes have lower contact potential barriers and better contact performance, but Ag–Al spikes are difficult to control. Adding Si to Ag–Al pastes effectively limited the formation of spikes, but it will significantly increase potential barriers and deteriorate electrical performance. By contrast, using Al–Si alloys can not only achieve comprehensive regulation of the size and composition of Ag–Al spikes, but also ensure good electrical performance. This study developed Al–Si alloy pastes with great potential for application, which were of great significance for regulation of Ag–Al spikes and the development of advanced Ag–Al pastes.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. High efficiency n-type Si solar cells on Al2O3-passivated boron emitters10.1063/1.2945287 ↗
2. Structure and transformation of the metastable boron- and oxygen-related defect center in crystalline silicon10.1103/PhysRevB.69.024107 ↗
3. 24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design10.1016/j.solmat.2019.110258 ↗
4. Fundamentals, present status and future perspective of TOPCon solar cells: a comprehensive review
5. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
6. Approaching efficiencies above 25% with both sides-contacted silicon solar cells
7. The formation mechanism for printed silver-contacts for silicon solar cells10.1038/ncomms11143 ↗
8. N-type single-crystalline Si solar cells: front side metallization for solar cells reaching 20% efficiency10.1016/j.solmat.2016.05.027 ↗
9. Review on screen printed metallization on p-type silicon10.1016/j.egypro.2012.05.003 ↗
10. Large area n-type multicrystalline silicon solar cells with B-emitter: efficiencies exceeding 14
11. Development of screenprintable contacts for p+ emitters in bifacial solar cells
12. Screen printable Ag-Al metal pastes for p+ silicon application in solar cells
13. Effects of aluminum in metallization paste on the electrical losses in bifacial N-type crystalline silicon solar cells10.1016/j.egypro.2016.10.086 ↗
14. Metallisation of boron‐doped polysilicon layers by screen printed silver pastes
15. Analysis of ohmic losses due to solder and pressure interconnection and related interface resistances for solar cells10.1016/j.egypro.2015.07.059 ↗
16. Contacting BBr3-based boron emitters with aluminium-free screen-printing paste10.1016/j.egypro.2016.07.103 ↗
17. Structural investigation of printed Ag/Al contacts on silicon and numerical modeling of their contact recombination10.1109/JPHOTOV.2016.2591318 ↗
18. Microstructural characterization and current conduction mechanisms of front-side contact of n-type crystalline Si solar cells with Ag/Al pastes10.1063/1.4921544 ↗
19. Emitter recombination current densities of boron emitters with silver/aluminum pastes
20. Contacting boron emitters on n-type silicon solar cells with aluminum-free silver screen-printing pastes10.1002/pssr.201510443 ↗
21. The electrical losses induced by silver paste in n-type silicon solar cells10.7567/JJAP.56.102302 ↗
22. Role of aluminum in silver paste contact to boron-doped silicon emitters
23. Microscopic origin of the aluminum assisted spiking effects in n-type silicon solar cells10.1016/j.solmat.2014.05.036 ↗
24. Preservation of Si surface structure by Ag/Al contact spots – an explanatory model10.1016/j.egypro.2015.03.286 ↗
25. Towards understanding the characteristics of Ag–Al spiking on boron-doped silicon for solar cells10.1016/j.solmat.2015.11.032 ↗
26. Formation of Ag/Al screen-printing contacts on B emitters10.1109/JPHOTOV.2014.2364117 ↗
27. Contact formation in the silver/aluminum thick film firing process - a phenomenological approach
28. Modeling of contact resistivity of fire-through Ag-Al contacts to boron doped LPCVD polysilicon layers10.1063/5.0126042 ↗
29. Crystalline nature of metal spikes and silicon inclusions in Ag/Al screen-printing metallization10.1109/JPHOTOV.2015.2493363 ↗
30. Current conduction mechanism of front-side contact of N-type crystalline Si solar cells with Ag/Al pastes10.1109/JPHOTOV.2013.2292350 ↗
31. Screen-Printable conductor metallizations for industrial n-TOPCon crystalline silicon solar cells
32. Dose-dependency of contact resistance and sheet resistance of B-implanted emitters for N-type crystalline Si solar cells fabricated using screen-printed fire-through Ag/Al paste metallization process10.1007/s40042-023-00752-7 ↗
33. Impact of boron doping profiles on the specific contact resistance of screen printed Ag–Al contacts on silicon10.1016/j.solmat.2015.04.039 ↗
34. Screen printing metallization of boron emitters10.1002/pip.933 ↗
35. Effect of Al content on the performance of Ag/Al screen printed N-type Si solar cells
36. Basic study on the influence of glass composition and aluminum content on the Ag/Al paste contact formation to boron emitters10.1016/j.egypro.2015.03.284 ↗
37. Low recombination firing-through Al paste for N-type solar cell with boron emitter10.3390/ma14040765 ↗
38. Effects of particle size of aluminum powder in silver/aluminum paste on n-type solar cells10.3934/matersci.2018.4.614 ↗
39. Effect of glass phase and temperature on contact resistance between Ag and Al electrodes10.1088/2053-1591/aaf52b ↗
40. Influence of silver-aluminium alloy at solar cell rear side on series resistance and open circuit voltage10.1016/j.egypro.2016.07.065 ↗
41. Al-induced variation to Ag crystal orientation of Ag–Al pastes during metallization10.1016/j.solmat.2024.112814 ↗
42. Preferred orientation and morphology of twinned crystals by electrocrystallization of silver10.1016/0013-4686(68)80148-3 ↗
43. Insight into interfaces and junction of polycrystalline silicon solar cells by kelvin probe force microscopy10.1016/j.nanoen.2017.04.045 ↗
44. Aluminum-silicon ohmic contact on “shallow” n+p junctions10.1016/0038-1101(80)90011-8 ↗
45. Anomalous temperature dependence of series resistance in Ag/Si and Al/Si Schottky junctions10.1016/S0042-207X(98)00076-1 ↗