High-performance laminated NiO film striking a balance between the color-changing capability and cycling stability and its real application in bistable display
Source abstract
Abstract
Electrochromic (EC) technology is highly desirable in energy-conserving bistable displays as it can dynamically modulate color changes under small voltages and maintain the changed color after the power is cut off. For its practical application, low cost, easy fabrication and good durability are crucial. The shoulder-by-shoulder EC structure is talented in achieving low cost and easy fabrication because the counter electrode and its corresponding conductive layer were not necessary in it. Moreover, the EC material determines the stability against light radiation and long-term use. Herein, crystalline NiO films were selected owing to their gifted structure stability in crystalline state, and were fabricated through the sputtering process at a high deposition rate of 50 nm/min. The NiO film was further optimized to a laminated structure with the room-temperature-deposited NiO at the top and the 100 °C-deposited NiO at the bottom adjacent to ITO substrates as the adhesive layer. A high optical modulation rate of 59 % and excellent cycling stability with only 6 % degradation over 3000 cycles were achieved. Bistable price tags were then designed using the high-performance laminated NiO film and shoulder-by-shoulder EC structure. Thus fabricated EC material will significantly advance the applications of EC technology in various intelligent display scenarios.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Conducting polymers and applications · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Electronic transport in amorphous HxWO310.1103/PhysRevLett.39.232 ↗
2. Electrochromics for smart windows: oxide-based thin films and devices10.1016/j.tsf.2013.10.033 ↗
3. A new design of an electrochromic energy storage device with high capacity, long cycle lifetime and multicolor display10.1039/D0TA04824K ↗
4. Properties, requirements and possibilities of smart windows for dynamic daylight and solar energy control in buildings: a state-of-the-art review10.1016/j.solmat.2009.08.021 ↗
5. Bio-inspired ultra-high energy efficiency bistable electronic billboard and reader10.1038/s41467-019-09556-5 ↗
6. Direct observation of conducting filaments in tungsten oxide based transparent resistive switching memory10.1021/acsami.6b08154 ↗
7. WO3-based electrochromic distributed bragg reflector: toward electrically tunable microcavity luminescent device10.1002/adom.201700791 ↗
8. Rational design of oxygen-deficiency-controlled tungsten oxide electrochromic films with exceptional memory effect10.1021/acsami.0c06786 ↗
9. Voltage-tunable dual image of electrostatic force-assisted dispensing printed, tungsten trioxide-based electrochromicdevices with a symmetric configuration10.1021/acsami.9b21254 ↗
10. Triboelectric-optical responsive cholesteric liquid crystals for self-powered smart window, E-paper display and optical switch10.1016/j.scib.2021.05.016 ↗
11. Electrically responsive photonic crystals with bistable states for low-power electrophoretic color displays10.1038/s41467-022-34745-0 ↗
12. Electrochromic organic and polymeric materials for display applications10.1016/j.displa.2005.03.003 ↗
13. Development and manufacture of polymer-based electrochromic devices10.1002/adfm.201403765 ↗
14. A multicolour bistable electronic shelf label based on intramolecular proton-coupled electron transfer10.1038/s41563-019-0471-8 ↗
15. Dynamic metal-ligand interaction of synergistic polymers for bistable see-through electrochromic devices
16. A strategy of stabilization via active energy-exchange for bistable electrochromic displays10.31635/ccschem.021.202101180 ↗
17. Bistable elastic electrochromic ionic gels for energy-saving displays10.1021/acsami.1c05768 ↗
18. Energy saving electrochromic windows from bistable low-HOMO level conjugated polymers10.1039/C5EE03160E ↗
19. Current status of some electrochromic materials and devices: a brief review10.1088/1361-6463/ac10d6 ↗
20. Structure evolution of electrochromic devices from ‘face-to-face’ to ‘shoulder-by-shoulder’10.1039/D0TC01132K ↗
21. Greatly simplified all-solid-state camera shielding device of mobile phone based on the shoulder-by-shoulder electrochromic technology10.1021/acsaelm.1c00223 ↗
22. Flexible electrochromic device on polycarbonate substrate with PEDOT:PSS and color-neutral TiO2 as ion storage layer10.3390/polym15091982 ↗
23. Electrochromism of non-stoichiometric NiO thin film: as single layer and in full device10.1007/s00339-016-9923-z ↗
24. Improved electrochromic devices with an inorganic solid electrolyte protective layer10.1016/j.solmat.2005.04.033 ↗
25. Electrochromic properties of organic-inorganic composite materials10.1016/j.jallcom.2017.05.222 ↗
26. Unveiling mechanical degradation for a monolithic electrochromic device: glass/ITO/WO3/LiClO4 (PEO)/TiO2/ITO/glass
27. Efficient electrochromic efficiency and stability of amorphous/crystalline tungsten oxide film10.1016/j.jallcom.2022.167405 ↗
28. Preparation of WO3 films with controllable crystallinity for improved near-infrared electrochromic performances10.1021/acssuschemeng.0c03141 ↗
29. The influence of crystallinity on the electrochromic properties and durability of NiO thin films10.1016/j.surfin.2016.12.004 ↗
30. Hierarchical SnO2@ NiO core/shell nanoflake arrays as energy-saving electrochromic materials10.1039/C4TC02204A ↗
31. Face-centered cubic p-type NiO films room-temperature prepared via direct-current reactive magnetron sputtering-Influence of sputtering power on microstructure, optical and electrical behaviors
32. Influence of annealing temperature of WO3 in photoelectrochemical conversion and energy storage for water splitting10.1021/am401112q ↗
33. Eliminating degradation and uncovering ion-trapping dynamics in electrochromicWO3 thin films10.1038/nmat4368 ↗
34. Prominent electrochromism achieved using aluminum ion insertion/extraction in amorphous WO3 films10.1021/acs.jpcc.8b05692 ↗
35. Z. Zhang, H. Mo, R. Li, X. Zhou, Z. Lin, J. Zhang, X. Tang, Y. Zhan and J. Luo, The counterbalancing role of oxygen vacancy between the electrochromic properties and the trapping effect passivization for amorphous tungsten oxide films, Small Sci., https://doi.org/10.1002/smsc.202300219..
36. The growth, properties and application of reactively sputtered nickel oxide thin films in all thin film electrochromic devices10.1016/j.mseb.2021.115196 ↗
37. Elucidating dual-defect mechanism in rhenium disulfide nanosheets with multi-dimensional ion transport channels for ultrafast sodium storage10.1016/j.nanoen.2020.105189 ↗
38. Electron transport and electrochromic properties of sol-gel WO3 thin films: effect of crystallinity10.1016/j.tsf.2018.03.011 ↗
39. Faradaic and/or capacitive: which contribution for electrochromism in NiO thin films cycled in various electrolytes10.1016/j.solmat.2019.110114 ↗
40. Large coloration efficiency and fast response NiO electrochromic thin film electrode based on NiO nanocrystals
41. Surface amending effect of N-doped carbon-embedded NiO films for multirole electrochromic energy-storage devices10.1016/j.apsusc.2020.147902 ↗
42. Fast-switching quasi-solid state electrochromic full device based on mesoporous WO3 and NiO thin films
43. Electrochromic properties and performance of NiOx films and their corresponding all-thin-film flexible devices prepared by reactive DC magnetron sputtering10.1016/j.apsusc.2016.04.154 ↗