High carrier lifetimes in UMG multicrystalline wafers after P- diffusion compatible with high-efficiency cell structures
Source abstract
Abstract
High-quality multicrystalline Upgraded Metallurgical Grade Silicon (UMG-Si) offers significant advantages over conventional polysilicon-based PV technology, associated to lower cost, lower energy budget and lower carbon footprint. The aim of this study is twofold: on the one hand, to ascertain the efficiency potential of solar cells based on this material in terms of carrier lifetime; and on the other hand, to explore, as a result of that, the adoption of high-efficiency cell architectures by establishing an effective rear-side passivation scheme for the implementation of passivated emitter rear contact (PERC) devices. The carrier lifetime and the surface passivation efficacy are investigated for different passivating layer configurations after single and double P-diffusion gettering processes. Layer stacks consisting of Al2O3, SiOxNy and a-SiNx:H capping overlayers have been optimized, on industrial size, saw-damage-etched UMG wafers and results compared to those obtained using reference iodine-ethanol (IE) passivation. Diagnosis based on minority carrier lifetime and implied Voc (iVoc) measurements helped monitor the impact of parameter optimization on wafer quality, particularly after firing processes. Carrier lifetimes over 600 us at 10^15 cm-3 injection level as well as up to 790 us locally have been measured in UMG-Si wafers passivated with IE after a Phosphorus Diffusion Gettering (PDG), demonstrating the suitability of the material for high-efficiency cell architectures. Values higher than 300 us have been obtained with Al2O3-based passivation layers for gettered UMG wafers, with implied Voc values up to 710 mV. These record-breaking lifetimes and iVoc figures obtained with p-type multicrystalline UMG-Si material demonstrate a significant upgrading of its electronic quality by means of industry-scalable technical processes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. 2021
2. Ray · 2020 · 21
3. Solar photovoltaics is ready to power a sustainable future10.1016/j.joule.2021.03.005 ↗
4. 2021
5. Fraunhofer · 2021
6. 2021
7. Bloomberg
8. Upgraded metallurgical grade silicon for solar electricity production: a comparative life cycle assessment10.1016/j.scitotenv.2021.147969 ↗
9. Recombination activity of interstitial iron and other transition metal point defects in p- and n-type crystalline silicon10.1063/1.1812833 ↗
10. Effects of the compensation level on the carrier lifetime of crystalline silicon10.1063/1.2961030 ↗
11. High efficiency UMG silicon solar cells: impact of compensation on cell parameters10.1002/pip.2729 ↗
12. Compensation engineering for silicon solar cells10.1016/j.egypro.2012.02.008 ↗
13. Mass production test of solar cells and modules made of 100% UMG silicon. 20.76% record efficiency10.3390/en12081495 ↗
14. Effect of hydrogen on passivation quality of SiNx/Si-rich SiNx stacked layers deposited by catalytic chemical vapor deposition on c-Si wafers10.1016/j.tsf.2014.10.016 ↗
15. Precipitates and hydrogen passivation at crystal defects in n- and p-type multicrystalline silicon10.1063/1.2800271 ↗
16. Hydrogen passivation of Fe-related deep energy levels at a direct silicon-bonded (1 1 0)/(1 0 0) grain boundary10.1016/j.scriptamat.2010.12.011 ↗
17. UMG silicon for solar PV: from defects engineering to PV module degradation10.1016/j.solener.2021.03.076 ↗
18. A unified mobility model for device simulation—I. Model equations and concentration dependence10.1016/0038-1101(92)90325-7 ↗
19. Towards a unified low-field model for carrier mobilities in crystalline silicon10.1016/j.solmat.2014.05.047 ↗
20. QSS-μPCD measurement of lifetime in silicon wafers: advantages and new applications10.1016/j.egypro.2011.06.113 ↗
21. Novel noncontact approach to monitoring the field-effect passivation of emitters10.1016/j.egypro.2011.06.104 ↗
22. Unified lifetime metrology and photoluminescence imaging of passivation defects for silicon PV10.1016/j.egypro.2013.07.269 ↗
23. Phosphorous diffusion gettering of trapping centers in upgraded metallurgical‐grade solar silicon10.1002/pssr.202100054 ↗
24. Enhanced iron gettering by short, optimized low-temperature annealing after phosphorus emitter diffusion for industrial silicon solar cell processing10.1002/pssc.201000334 ↗
25. Al 2 O 3/SiON stack layers for effective surface passivation and anti-reflection of high efficiency n-type c-Si solar cells10.1088/1361-6641/32/2/025005 ↗
26. Hydrogen induced passivation of Si interfaces by Al2O3 films and SiO2/Al2O3 stacks10.1063/1.3497014 ↗
27. High-performance transparent ultraviolet photodetectors based on inorganic perovskite CsPbCl3 nanocrystals
28. Towards 20% solar cell efficiency using silicon from metallurgical process route10.1016/j.egypro.2014.08.030 ↗
29. Upgrade of an industrial Al-BSF solar cell line into PERC using spatial ALD Al2O3