Corrosion resistance of high nickel alloys in solar salt at 600 °C for up to 4000 h
Source abstract
Abstract
This study focuses on the time dependent performance of the corrosion resistance of IN625, H230 and 740H alloys in the solar salt (60 wt% NaNO 3, 40 wt% KNO 3 , at 600 °C) for up to 4000 h. Alloy IN625 showed the lowest mass change with parabolic oxidation kinetics that tends to stabilize with exposure time. Both 740H and H230 alloys deviated from the parabolic oxidation behavior beyond the 3000 h of exposure. Alloy 740H showed the highest mass loss due to the nonuniform surface oxidation and the high chromium dissolution rate. Internal oxidation was noticed with Alloy H230 due to the high tungsten concentrations.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Solar Thermal and Photovoltaic Systems · Phase Change Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Heat transfer fluids for concentrating solar power systems – a review10.1016/j.apenergy.2015.01.125 ↗
2. Corrosion behavior of high nickel alloys in molten nitrate solar salt
3. Perspectives on selected alloys in contact with eutectic melts for thermal storage: nitrates, carbonates and chlorides10.1016/j.solener.2021.06.069 ↗
4. Comparative review of different influence factors on molten salt corrosion characteristics for thermal energy storage10.1016/j.solmat.2021.111485 ↗
5. Suppression of molten salt corrosion by plasma sprayed Ni3Al coatings10.1007/s42247-021-00334-y ↗
6. Application of double loop electrochemical potentio-kinetic reactivation for characterizing the intergranular corrosion susceptibility of stainless steels and Ni-based alloys in solar nitrate salts used in CSP systems10.1016/j.engfailanal.2021.105717 ↗
7. High-temperature corrosion behaviour of metal alloys in commercial molten salts10.1016/j.solener.2020.03.010 ↗
8. Experimental research of high temperature dynamic corrosion characteristic of stainless steels in nitrate eutectic molten salt10.1016/j.solener.2020.09.034 ↗
9. Molten salt corrosion mechanisms of nitrate based thermal energy storage materials for concentrated solar power plants: a review10.1016/j.solmat.2019.02.012 ↗
10. Molten nitrate salts at 600 and 680°C: thermophysical property changes and corrosion of high-temperature nickel alloys10.1016/j.solener.2014.01.028 ↗
11. Corrosion of alumina‐forming austenitic steel in molten nitrate salts by gravimetric analysis and impedance spectroscopy10.1002/maco.201307422 ↗
12. Molten salt corrosion of stainless steels and low-Cr steel in CSP plants10.1007/s11085-012-9310-x ↗
13. Corrosion behavior of structural materials for potential use in nitrate salts based solar thermal power plants10.1149/2.0501708jes ↗
14. Evaluation of corrosion resistance of A516 Steel in a molten nitrate salt mixture using a pilot plant facility for application in CSP plants10.1016/j.solmat.2016.12.002 ↗
15. High temperature corrosion beneath nitrate melts10.1002/maco.201307076 ↗
16. High-temperature corrosion performance of austenitic stainless steels type AISI 316L and AISI 321H, in molten Solar Salt10.1016/j.solener.2018.11.019 ↗
17. A. Kruizenga, D. Gill, M. LaFord, Materials Corrosion of High Temperature Alloys Immersed in 600 °C Binary Nitrate Salt. Sandia National Laboratories, SAND 2013-2526.10.2172/1088090 ↗
18. A. Kruizenga, D. Gill, M. LaFord, G. McConohy, Corrosion of High Temperature Alloys in Solar Salt at 400, 500 and 680 °C. Sandia National Laboratories, SAND 2013-8256.10.2172/1104752 ↗
19. https://www.specialmetals.com/documents/technical-bulletins/inconel/inconel-alloy-625.pdf.
20. http://haynesintl.com/docs/default-source/pdfs/new-alloy-brochures/high-temperature-alloys/brochures/230-brochure.pdf?sfvrsn=ae7229d4_86.
21. https://www.specialmetals.com/documents/technical-bulletins/inconel/inconel-alloy-740h.pdf.
22. Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens, in G1-032003, ASTM International.
23. High temperature oxidation behavior of aluminized Haynes 23010.1016/j.corsci.2020.108835 ↗
24. A comparison of the microstructure and creep behavior of cold rolled HAYNES 230 alloy and HAYNES 282 alloy10.1016/j.msea.2011.03.019 ↗
25. R. Bradshaw, S. Goods, Corrosion of Alloys and Metals by Molten Nitrates. Sandia National Laboratories, SAND 2000-8727.10.2172/1545803 ↗
26. High-temperature and corrosion behavior of nitrate nitrite molten salt mixtures regarding their application in concentrating solar power plants10.1016/j.egypro.2015.03.071 ↗
27. Corrosion behavior of 45 steel in molten nitrate salts with 3wt% impurities at 773.15K10.1088/1757-899X/394/3/032117 ↗
28. High temperature oxidation of advanced FeCrNi alloy in steam environments using synchrotron methods10.1016/j.apsusc.2017.06.318 ↗
29. Young · 2016 · 261
30. Doğan · 2016 · 1
31. The oxidation of nickel - tungsten alloys10.1016/0010-938X(76)90033-0 ↗
32. Investigation of impurity driven corrosion behavior in molten 2LiF-BeF2 salt10.1016/j.corsci.2020.108823 ↗
33. Aggregation and data analysis of corrosion studies in molten chloride and fluoride salts10.1016/j.jnucmat.2018.07.036 ↗
34. Non-galvanic mass transport in molten fluoride salt isothermal corrosion cells10.1016/j.corsci.2020.108955 ↗
35. Activity gradient driven mass transport in molten fluoride salt medium10.1038/s41529-022-00239-z ↗