journal article·2014-02

Characteristics of a ZnTiO and ITO cathode-integrated electrodes for inverted organic solar cells

Sin-Bi Kang, Yong-Jin Noh, Seok-In Na, Han-Ki Kim

Publisher page

Abstract

We investigated the characteristics of TiO2 and ZnO co-sputtered ZnTiO (ZTO) buffer layer for use in inverted organic solar cell (IOSCs). The 40 nm-thick ZTO buffer layer deposited on a crystalline ITO cathode showed different device performances depending on the RF and DC powers applied on the TiO2 and ZnO targets, respectively. Compared to IOSCs with a TiO2-rich ZTO buffer layer, the IOSCs with a ZnO-rich ZTO buffer layer showed better performances due to their higher optical transmittances and well-matched work function. At the optimized power ratio of ZnO:TiO2 (70:30%), the ZTO buffer layer exhibited an optical transmittance of 78% at a wavelength of 550 nm. The IOSCs with the optimized ZTO buffer layer exhibited a good cell-performance with a fill factor of 52.05%, a short circuit current of 8.81 mA/cm2, an open circuit voltage of 0.66 V, and a power conversion efficiency of 3.03%, which are comparable to IOSCs containing a conventional sol–gel processed ZnO buffer layer. Furthermore, the microstructure and interface structure for the IOSC with the ZTO buffer layer and ITO cathode-integrated electrode was investigated in detail using high resolution transmission electron microscopy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Advanced materials and processes for polymer solar cells devices10.1039/B913168J ↗
2. Up scaling of polymer solar cell fabrication using full roll-to-roll processing
3. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
4. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
5. Overcoming efficiency challenges in organic solar cells: rational development of conjugated polymers10.1039/c2ee21608f ↗
6. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
7. Organic tandem solar cells: A review10.1039/b817952b ↗
8. Polymer solar cells: recent development and possible routes for improvement in the performance10.1016/j.solmat.2009.10.005 ↗
9. A roll-ro-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
10. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
11. High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1- phenyl-(6,6)C61 blends10.1063/1.2006986 ↗
12. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
13. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
14. Effect of atmospheres on the open-circuit photovoltage of nanoporous TiO2/poly(3-hexylthiophene) heterojunction solar cell10.1016/j.tsf.2004.12.056 ↗
15. Development of air stable polymer solar cells using an inverted gold on top anode structure10.1016/j.tsf.2004.10.018 ↗
16. Efficient electron injection mechanism inorganic light-emitting diodes using an ultrathin layer of low-work-function metals10.1143/JJAP.42.L1535 ↗
17. Highly efficient and stable inverted polymer solar cells integrated with a cross-linked fullerene material as an inter layer10.1021/ja100236b ↗
18. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
19. Highly durable inverted-type organic solar cell using amorphous titanium oxideas electron collection electrode inserted between ITO and organic layer10.1016/j.solmat.2008.06.012 ↗
20. All solution processed tandem polymer solar cells based on thermocleavable materials10.1016/j.solmat.2008.05.005 ↗
21. Hybrid inverted bulk heterojunction solar cells with nano imprinted TiO2 nanopores10.1016/j.solmat.2009.04.014 ↗
22. Inverted bulk-heterojunction organic solar cell using chemical bath deposited titanium oxide as electron collection layer10.1016/j.orgel.2010.04.008 ↗
23. Highly efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact10.1063/1.2402890 ↗
24. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
25. Lengthening the polymer solidification time to improve the performance of polymer/ZnO nanorod hybrid solar cells10.1016/j.solmat.2009.04.016 ↗
26. Indium-free, acid-resistant anatase Nb-doped TiO2 electrodes activated by rapid-thermal annealing for cost-effective organic photovoltaics10.1016/j.solmat.2011.03.021 ↗
27. The role of molybdenum oxide as anode interfacial modification in the improvement of efficiency and stability in organic light-emitting diodes10.1016/j.orgel.2008.07.009 ↗
28. Bulk and interface properties of molybdenum trioxide-doped hole transporting layer in organic light-emitting diodes10.1016/j.orgel.2007.12.001 ↗
29. Highly efficient inverted poly(3-hexylthiophene):methano-fullerene[6,6]-phenylC71-butyric acid methylester bulk heterojunction solar cell with Cs2CO3 and MoO310.1016/j.orgel.2010.11.024 ↗
30. An inverted polymer photovoltaic cell with increased air stability obtained by employing novel hole/electron collecting layers10.1039/b815523b ↗
31. A. Manthiram, Influence of polymer–metal interface on the photovoltaic properties and long-term stability of nc-TiO2-P3HT hybrid solar cells10.1016/j.solmat.2010.01.021 ↗
32. Efficient charge collection with sol–gel derived colloidal ZnO thin film in photovoltaic devices10.1007/s10971-009-2048-5 ↗