Phosphorus gettering in low-cost cast monocrystalline silicon for heterojunction solar cells
Source abstract
Abstract
Phosphorus gettering using tubular diffusion furnaces was performed on n-type cast monocrystalline silicon wafers to assess its impact on wafer quality and the conversion efficiency of heterojunction solar cells. A comprehensive analysis of temperature, duration, and cooling rate in the diffusion process was conducted. The optimal parameters were identified at a temperature of 850 °C for 30 min, with a cooling rate of 5 °C/min down to 500 °C. This gettering process effectively reduced interstitial iron concentration, improved minority carrier lifetime, and increased the average efficiency of HJT cells by an absolute 0.4 %, with a 1.1 % increase for those made from bottom wafers with high metal concentration.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. A comprehensive evaluation of solar cell technologies, associated loss mechanisms, and efficiency enhancement strategies for photovoltaic cells10.1016/j.egyr.2024.03.007 ↗
2. Historical market projections and the future of silicon solar cells10.1016/j.joule.2023.11.006 ↗
3. Effective impurity gettering by phosphorus- and boron-diffused polysilicon passivating contacts for silicon solar cells10.1016/j.solmat.2017.11.004 ↗
4. Dislocation determination and quality control of industrial cast monocrystalline silicon10.1016/j.solmat.2024.112705 ↗
5. Higher quality mono-like cast silicon with induced grain boundaries10.1016/j.solmat.2015.03.027 ↗
6. Control of dislocation clusters by artificially-introduced micro-twins in cast-mono silicon10.1016/j.jcrysgro.2022.126820 ↗
7. Gettering in silicon photovoltaics: a review
8. Reduction of trapping and recombination in upgraded metallurgical grade silicon: impact of phosphorous diffusion gettering
9. Mechanism of internal gettering of interstitial impurities in Czochralski-grown silicon10.1103/PhysRevLett.64.196 ↗
10. Effects of low-temperature annealing phosphorous gettering process on the electrical properties of multi-crystalline silicon with a low minority carrier lifetime
11. Phosphorous diffusion gettering of n-type CZ silicon wafers for improving the performances of silicon heterojunction solar cells10.1016/j.solmat.2016.05.023 ↗
12. Effects of phosphorus diffusion gettering on minority carrier lifetimes of single-crystalline, multi-crystalline and UMG silicon wafer10.1016/j.cap.2013.09.013 ↗
13. Gettering in multicrystalline silicon wafers with screen-printed emitters10.1002/pip.1099 ↗
14. Engineering metal-impurity nanodefects for low-cost solar cells10.1038/nmat1457 ↗
15. Improved phosphorous gettering of multicrystalline silicon10.1016/j.solmat.2005.05.015 ↗
16. Phosphorus gettering of precipitated Cu in single crystalline silicon based on rapid thermal process10.1016/j.jcrysgro.2010.07.036 ↗
17. Phosphorus diffusion gettering of substitutional metal contaminants at a small-angle grain boundary in n-type silicon: the case of gold10.1016/j.jcrysgro.2013.05.034 ↗
18. Internal gettering of iron in multicrystalline silicon at low temperature10.1063/1.2987521 ↗
19. Iron contamination in silicon technology10.1007/s003390051074 ↗