Optimization of rear surface morphology in n-type TOPCon c-Si solar cells
Source abstract
Abstract
Tunnel oxide passivated contact (TOPCon) crystalline silicon (c-Si) solar cells have attracted much attention because of their superior electrical properties such as the lower contact resistivity and better interface passivation at high temperatures. However, the TOPCon c-Si solar cells also have room for further improvement in optical performance, and the embodiment of optical advantages needs to be matched synchronously in electrical aspect. Here, the rear silicon pyramids with different angles have been achieved through solution corrosion to maximize the light absorption in the c-Si substrate. The light absorption for the pyramid angle of less than 30° is better. Compared with the cell samples with rear pyramid for a certain angle, the samples with flat back surface possess better surface passivation, and the contact resistivity can be reduced effectively by increasing the phosphorus doping concentration and adjusting the annealing temperature. Furthermore, the TOPCon c-Si solar cells with flat rear surface covered by 70 nm poly-Si have been demonstrated to increase the conversion efficiency by about 0.15 % vs. the counterpart for poly-Si of 130 nm thickness, and the improvement is mainly due to the increase of J SC and FF by 0.07 mA/cm 2 and 0.72 %, respectively.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Advancements in Semiconductor Devices and Circuit Design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Passivating contacts for crystalline silicon solar cells10.1038/s41560-019-0463-6 ↗
2. Atomic layer-deposited tunnel oxide stabilizes silicon photoanodes for water oxidation10.1038/nmat3047 ↗
3. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
4. Solar cell efficiency tables (version 63)
5. Highlights of mainstream solar cell efficiencies in 202310.1007/s11708-024-0937-5 ↗
6. 2023
7. Application of dual-layer polysilicon deposited by PECVD in n-type TOPCon solar cells10.1016/j.solmat.2023.112519 ↗
8. Laser doping selective emitter with thin borosilicate glass layer for n-type TOPCon c-Si solar cells10.1016/j.solmat.2023.112230 ↗
9. Atmospheric pressure dry etching of polysilicon layers for highly reverse bias-stable TOPCon solar cells10.1002/solr.202100481 ↗
10. Laser-enhanced contact optimization on iTOPCon solar cells10.1002/pip.3598 ↗
11. Texturing of monocrystalline silicon wafers by HF-HCl-H2O2 mixtures: Generation of random inverted pyramids and simulation of light trapping in PERC solar cells10.1016/j.solmat.2016.08.034 ↗
12. Approaching 23% efficient n-type crystalline silicon solar cells with a silicon oxide-based highly transparent passivating contact10.1016/j.nanoen.2022.107319 ↗
13. Efficiency roadmap for evolutionary upgrades of PERC solar cells by TOPCon: Impact of parasitic absorption10.1109/JPHOTOV.2019.2957642 ↗
14. Inkjet printing of phosphorus dopant sources for doping poly-silicon in solar cells with passivating contacts10.1016/j.solmat.2020.110926 ↗
15. Double-sided TOPCon solar cells on textured wafer with ALD SiOx layer10.1016/j.solmat.2019.110357 ↗
16. Optimization of rear surface roughness and metal grid design in industrial bifacial PERC solar cells10.1016/j.solmat.2020.110712 ↗
17. Nanofocusing of mid-infrared energy with tapered transmission lines10.1038/nphoton.2011.33 ↗
18. Design of nanowire optical cavities as efficient photon absorbers10.1021/nn5003776 ↗
19. Tunnel oxide passivating electron contacts as full-area rear emitter of high-efficiency p-type silicon solar cells10.1002/pip.2960 ↗
20. Characterization of laser-doped localized p-n junctions for high efficiency silicon solar cells10.1109/TED.2014.2318714 ↗
21. Effect of surface morphology on screen printed solar cells10.1016/j.cap.2009.05.005 ↗
22. Screen-printable contacts for industrial N-TOPCon crystalline silicon solar cells10.1109/JPHOTOV.2021.3138248 ↗
23. Lithium fluoride based electron contacts for high efficiency n-type crystalline silicon solar cells10.1002/aenm.201600241 ↗
24. Material properties of LPCVD processed n-type polysilicon passivating contacts and its application in PERPoly industrial bifacial solar cells
25. Will SiOx-pinholes for SiOx/poly-Si passivating contact enhance the passivation quality?10.1016/j.solmat.2023.112200 ↗
26. Application of phosphorus-doped polysilicon-based full-area passivating contact on the front textured surface of p-type silicon10.1002/pssr.202000455 ↗
27. Parasitic absorption in polycrystalline Si-layers for carrier-selective front junctions
28. Optical and electrical characterization of poly-Si/SiOx contacts and their implications on solar cell design