Inkjet-printed boron-doped poly-Si/SiOx passivating contacts
Source abstract
Abstract
In this study, we explore the utilization of inkjet printing technology with liquid ink to fabricate boron-doped polycrystalline silicon (poly-Si)/SiOx passivating contacts. The impacts of substrate morphology, baseplate temperature, and surface oxide on the printing performance were investigated to achieve distinct printed patterns. Moreover, a pre-oxidation process at 750 °C for 30 min was conducted as a strategy to prevent dopant spreading from the printed pattern via the gas phase during the high-temperature annealing. Thereafter, the influences of annealing temperature on the formed poly-Si passivating contact quality were studied. By applying optimized process conditions on intrinsic poly-Si(i-poly-Si)/SiOx/p-type crystalline Si (c-Si) substrates, promising surface passivation was achieved with an implied open-circuit voltage (iVoc) of 718 mV and a low contact resistivity (ρc) of 6.1 mΩ cm2 after annealing at 950 °C followed by a hydrogenation treatment. Optical images demonstrate that single-droplet dopant lines with a width of 69 μm could be realized on a mechanically polished substrate by printing with a drop spacing of 40 μm, while the line width expands on rough surfaces or when printing with a reduced drop spacing. Furthermore, high-resolution micro-photoluminescence maps clearly illustrate the localization of the boron-doped regions on polished and planar substrates after annealing. We also realized the formation of localized inkjet-printed phosphorus- and boron-doped poly-Si passivating contacts simultaneously within a single annealing step at 950 °C. These findings underscore the potential of inkjet printing as a promising technique for fabricating localized poly-Si/SiOx passivating contacts in high-efficiency silicon solar cells.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Nanowire Synthesis and Applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. 2023
2. Silicon‐based passivating contacts: the TOPCon route10.1002/pip.3522 ↗
3. 23% efficient p-type crystalline silicon solar cells with hole-selective passivating contacts based on physical vapor deposition of doped silicon films10.1063/1.5037610 ↗
4. SiO2 surface passivation layers–a key technology for silicon solar cells10.1016/j.solmat.2018.04.029 ↗
5. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
6. Firing stability of phosphorus-doped polysilicon passivating contacts: factors affecting the degradation behavior10.1016/j.solmat.2021.111407 ↗
7. Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses10.1038/s41560-021-00805-w ↗
8. Passivation quality control in poly-Si/SiOx/c-Si passivated contact solar cells with 734 mV implied open circuit voltage10.1016/j.solmat.2018.09.013 ↗
9. 2022
10. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
11. TOPCon – technology options for cost efficient industrial manufacturing10.1016/j.solmat.2021.111100 ↗
12. Fundamentals, present status and future perspective of TOPCon solar cells: a comprehensive review
13. Emitter formation with boron diffusion from PECVD deposited boron-doped silicon oxide for high-efficiency TOPCon solar cells10.1016/j.solmat.2022.111713 ↗
14. Industrial TOPCon solar cells realized by a PECVD tube process
15. Recent progress in inkjet-printed solar cells10.1039/C9TA03155C ↗
16. Inkjet technology for crystalline silicon photovoltaics10.1002/adma.201403631 ↗
17. Inkjet printing of phosphorus dopant sources for doping poly-silicon in solar cells with passivating contacts10.1016/j.solmat.2020.110926 ↗
18. TOPCon silicon solar cells with selectively doped PECVD layers realized by inkjet-printing of phosphorus dopant sources10.1109/JPHOTOV.2021.3129073 ↗
19. Development of phosphorus-doped nanoscale poly-Si passivating contacts via inkjet printing for application in silicon solar cells10.1021/acsanm.2c04148 ↗
20. Novel inkjet inks for complete off contact fabrication of silicon solar cell
21. Spribille · 2010
22. Inkjet printed copper source/drain metallization for amorphous silicon thin-film transistors10.1109/55.852958 ↗
23. Martín · 2012
24. Application of the inkjet-honeycomb-texture in silicon solar cell production10.1016/j.egypro.2012.07.081 ↗
25. Pre-annealing for improved LPCVD deposited boron-doped poly-Si hole-selective contacts10.1016/j.solmat.2022.112123 ↗
26. Contactless determination of current-voltage characteristics and minority-carrier lifetimes in semiconductors from quasi-steady-state photoconductance data10.1063/1.117723 ↗
27. Ohmic contacts for GaAs devices10.1016/0038-1101(67)90063-9 ↗
28. Inkjet-printed line morphologies and temperature control of the coffee ring effect10.1021/la7026847 ↗
29. Surface passivation of boron diffused junctions by borosilicate glass and in situ grown silicon dioxide interface layer
30. Formation of emitter by boron spin-on doping from SiO2 nanosphere and properties of the related n-PERT solar cells10.1016/j.solener.2021.07.033 ↗
31. Numerical exploration for structure design and free-energy loss analysis of the high-efficiency polysilicon passivated-contact p-type silicon solar cell10.1016/j.solener.2018.12.044 ↗
32. 26.1%‐efficient POLO‐IBC cells: quantification of electrical and optical loss mechanisms10.1002/pip.3098 ↗