n/p and p/n InGaAs cells for high density TPV modules
Source abstract
Abstract
Designing TPV modules using smaller area cells contributes to mitigating the series resistance losses caused by the large currents typically handled. However, the areal losses caused by the larger number of interconnections required challenge the design of high compacity modules, which is necessary to maximize the output power density or the TPV efficiency. Here we propose using series connected n/p and p/n cells to minimize the areal losses, attain high compacity modules and facilitate the manufacturing of the interconnections. This approach relies on attaining high performance TPV cells of both polarities. We demonstrate state-of-the-art InGaAs n/p cells, and a matching performance, in terms of JSC and VOC, in p/n cells. We assess the effect of the higher emitter sheet resistance in the p/n design, caused by the low mobility of holes in InGaAs. A minimal TPV efficiency loss is projected by using higher shadowing factors that have a reduced impact on the TPV efficiency thanks to the ability to recycle photons reflected at the front metal. Furthermore, this small loss could be offset, and the overall TPV efficiency significantly improved, by the higher compacity achievable in these modules.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: solar cell performance optimization · Advanced Semiconductor Detectors and Materials · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Ultra high temperature latent heat energy storage and thermophotovoltaic energy conversion10.1016/j.energy.2016.04.048 ↗
2. Thermal energy grid storage using multi-junction photovoltaics10.1039/C8EE02341G ↗
3. Present efficiencies and future opportunities in thermophotovoltaics10.1016/j.joule.2020.06.021 ↗
4. Near-perfect photon utilization in an air-bridge thermophotovoltaic cell10.1038/s41586-020-2717-7 ↗
5. Efficient and scalable GaInAs thermophotovoltaic devices10.1016/j.joule.2022.10.002 ↗
6. Thermophotovoltaic efficiency of 4010.1038/s41586-022-04473-y ↗
7. Algora · 2016
8. Dense array TPV modules with alternating polarity InGaAs cells
9. Novel interconnection method for micro-CPV solar cells
10. Back-contact solar cells: a review10.1002/pip.657 ↗
11. Point-defects assisted Zn-diffusion in AlGaInP/GaInP systems during the MOVPE growth of inverted multijunction solar cells10.1109/JPHOTOV.2020.3043849 ↗
12. Enhanced performance of GaInP/GaAs/Ge solar cells under high concentration through Pd/Ge/Ti/Pd/Al grid metallization10.1002/pip.3149 ↗
13. Low temperature annealed Pd/Ge/Ti metal systems for concentrator inverted metamorphic solar cells10.1063/1.5053506 ↗
14. A 3-D model for concentrator solar cells based on distributed circuit units10.1109/TED.2005.859620 ↗
15. A 32.6% efficient lattice-matched dual-junction solar cell working at 1000 suns10.1063/1.3078817 ↗
16. Recombination lifetime of In0.53Ga0.47As as a function of doping density10.1063/1.121669 ↗
17. Predictions of free-carrier electroabsorption and electrorefraction in Germanium10.1109/JPHOT.2015.2419217 ↗
18. Control of Zn diffusion in InP/InGaAs heterojunction bipolar transistor structures grown by metalorganic vapor phase epitaxy10.1063/1.361830 ↗
19. Zn diffusion behavior at the InGaAsP/InP heterointerface grown using MOCVD10.1016/j.jcrysgro.2006.09.028 ↗
20. Control of Zn diffusion in InP/InAlGaAs-based heterojunction bipolar transistors and light emitting transistors10.1016/j.jcrysgro.2008.07.034 ↗