Enhancing the efficiency of air-processed (Cu, Ag)2ZnSn(S, Se)4 solar cells by regulating the band tail and interface recombination
Source abstract
Abstract
Air-processed kesterite solar cells show excellent prospects for commercial application because they are suitable for large-scale production. This study shows how the power conversion efficiency (PCE) of (Cu, Ag) 2ZnSn(S, Se) 4 solar cells can be improved by adjusting the annealing time during the selenization process at a low temperature of 70 °C. Enhancement of PCE is achieved when the annealing time is 240 s. The primary determinant of enhanced PCE is a reduction in reverse saturation current density (J 0 ) and ideality factor (A). Examination of depth characterization indicated that the decrease in J 0 and A can be ascribed to the inhibition of [2Cu Zn + Sn Zn ] defects cluster, which is mainly accountable for the band tail states, and the suppression of interface recombination.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. 11.4% efficiency kesterite solar cells on transparent electrode
2. Toward high efficient Cu2ZnSn(Sx, Se1-x)4 solar cells: break the limitations of VOC and FF
3. Gradient conduction band energy engineering driven high‐efficiency solution‐processed Cu2ZnSn(S, Se)4/ZnxCd1–xS solar cells
4. Using soda-lime glass transition temperature to enhance the efficiency of Cu2ZnSn(S, Se)4 solar cell10.1016/j.jallcom.2023.171514 ↗
5. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency
6. Solar cell efficiency tables (version 62)10.1002/pip.3726 ↗
7. Device characteristics of an 11.4% CZTSe solar cell fabricated from sputtered precursors10.1002/aenm.201703295 ↗
8. Engineering of interface band bending and defects elimination via a Ag-graded active layer for efficient (Cu, Ag)2ZnSn(S, Se)4 solar cells10.1039/C7EE01405H ↗
9. Ge bidirectional diffusion to simultaneously engineer back interface and bulk defects in the absorber for efficient CZTSSe solar cells
10. Identifying the relationships between subsurface absorber defects and the characteristics of kesterite solar cells10.1002/cey2.336 ↗
11. Engineering solar cell absorbers by exploring the band alignment and defect disparity: the case of Cu- and Ag- based kesterite compounds10.1002/adfm.201502272 ↗
12. Unveiling the selenization reaction mechanisms in ambient air‐processed highly efficient kesterite solar cells10.1002/aenm.202300521 ↗
13. Elemental precursor solution processed (Cu1-xAgx)2ZnSn(S, Se)4 photovoltaic devices with over 10% efficiency10.1021/acsami.7b03944 ↗
14. Ag incorporation with controlled grain growth enables 12.5% efficient kesterite solar cell with open circuit voltage reached 64.2% shockley-queisser limit10.1002/adfm.202101927 ↗
15. Enhancing open-circuit voltage of solution-processed Cu2ZnSn(S, Se)4 solar cells with ag substitution10.1109/JPHOTOV.2017.2675993 ↗
16. Structure, optical and electrical properties of (Cu1-xAgx)2ZnSn(S, Se)4 alloy thin films for photovoltaic application10.1016/j.mssp.2018.03.014 ↗
17. Ambient air-processed Cu2ZnSn(S, Se)4 solar cells with over 12% efficiency10.1016/j.scib.2020.12.030 ↗
18. Control of the phase evolution of kesterite by tuning of the selenium partial pressure for solar cells with 13.8% certified efficiency10.1038/s41560-023-01251-6 ↗
19. Enhancing the efficiency of Cu2ZnSn(S, Se)4 solar cells by variable-temperature sulfoselenization10.1039/D3TC01792C ↗
20. A DMSO/MOE mixed solvent system for improving the morphology and efficiency of kesterite solar cell10.1016/j.solener.2023.04.044 ↗
21. Single-phase evolution path to new record efficiency of kesterite solar cells
22. Phase evolution under pressure10.1038/s41560-023-01261-4 ↗
23. CZTSSe solar cell with an efficiency of 10.19% based on absorbers with homogeneous composition and structure using a novel two-step annealing process10.1016/j.solener.2020.07.016 ↗
24. A high-efficiency (12.5%) kesterite solar cell realized by crystallization growth kinetics control over aqueous solution based Cu2ZnSn(S, Se)410.1039/D1TA09024K ↗
25. Exploring the optimal two-step selenization process to enhance the performance of ionic liquid solution based Cu2ZnSn(S, Se)4 thin film solar cells10.1016/j.jallcom.2022.164740 ↗
26. Enhancement of power conversion efficiency of Ag-substituted Cu2ZnSn(S, Se)4 solar cells via tuning Cu2+/(Cu++Cu2+) percentage in precursor solution10.1016/j.solmat.2023.112502 ↗
27. An efficient Li+-doping strategy to optimize the band alignment of a Cu2ZnSn(S, Se)4/CdS interface by a Se&LiF co-selenization process10.1039/D0TA07268K ↗
28. Ag, Ti dual-cation substitution in Cu2ZnSn(S, Se)4 induced growth promotion and defect suppression for high-efficiency solar cells10.1039/D2TA05909F ↗
29. Insight into the role of air-annealing Cu2ZnSnS4 precursor films in improving the efficiency of Cu2ZnSn(S, Se)4 solar cells10.1016/j.jallcom.2022.167308 ↗
30. Raman scattering analysis of the surface chemistry of kesterites: impact of post-deposition annealing and Cu/Zn reordering on solar cell performance10.1016/j.solmat.2016.07.009 ↗
31. Influence of compositionally induced defects on the vibrational properties of device grade Cu2ZnSnSe4 absorbers for kesterite based solar cells10.1063/1.4913262 ↗
32. Defects and surface electrical property transformation induced by elemental interdiffusion at the pn heterojunction via high-temperature annealing10.1021/acsami.1c00096 ↗
33. Insight into the role of post-annealing in air for high efficient Cu2ZnSn(S, Se)4 solar cells10.1016/j.solmat.2018.03.029 ↗
34. Synergistic effect of Mn on bandgap fluctuations and surface electrical characteristics in Ag-based Cu2ZnSn(S, Se)4 solar cells10.1039/D0TA10103F ↗
35. Understanding defects and band tailing characteristics and their impact on the device performance of Cu2ZnSn(S, Se)4 solar cells10.1039/D2TA00165A ↗
36. On the origin of band-tails in kesterite10.1016/j.solmat.2017.11.005 ↗
37. Improvement of efficiency in kesterite solar cells by intentionally inserting a thin MoS2 layer into the back interface10.1021/acsami.3c18045 ↗
38. Suppressed interface defects by GeSe2 post‐deposition treatment enables high‐efficiency kesterite solar cells
39. Two‐step cooling strategy for synergistic control of CuZn and SnZn defects enabling 12.87% efficiency (Ag, Cu)2ZnSn(S, Se)4 solar cells
40. Analysis of internal quantum efficiency in double-graded bandgap solar cells including sub-bandgap absorption10.1016/j.solmat.2010.10.028 ↗
41. Daniel · 2011
42. Defect engineering in earth-abundant Cu2ZnSn(S, Se)4 photovoltaic materials via Ga3+-doping for over 12% efficient solar cells10.1002/adfm.202010325 ↗
43. Abundance of CuZn + SnZn and 2CuZn + SnZn defect clusters in kesterite solar cells10.1063/1.4768215 ↗
44. Cation substitution in earth-abundant kesterite photovoltaic materials10.1002/advs.201870021 ↗
45. KCN chemical etch for interface engineering in Cu2ZnSnSe4 Solar Cells10.1021/acsami.5b02122 ↗
46. Optimization of CdS buffer layer for high-performance Cu2ZnSnSe4 solar cells and the effects of light soaking: elimination of crossover and red kink10.1002/pip.2589 ↗
47. Cu2ZnSn(SxSe1−x)4 thin film solar cell with high sulfur content (x approximately 0.4) and low VOC deficit prepared using a postsulfurization process10.1016/j.solmat.2017.09.036 ↗