Ultra-thin silicon oxide tunnel layer passivated contacts for screen-printed n-type industry solar cells
Source abstract
Abstract
Effects of the ultra-thin silicon oxide (SiO x ) on tunnel oxide passivated contact solar cells (TOPCon) are investigated in this paper. The experiment is fabricated to study the TOPCon electrical performance with different SiO x thickness and the champion efficiency is achieved by the TOPCon with a 1.5 nm SiO x layer, with V oc 698.93 mV, J sc 40.14 mA/cm 2, FF 81.03 and efficiency 22.73 %. For futher understanding, EDNA2 and AFORS-HET are used to simulate the relationship between the SiO x thickness, rear SRV and the doping concentration in n + layer. It indicates that the total J 0 at the SiO x-(c-Si) interface (J 0, interface ) can be affected by the phosphorus concentration at the SiO x -(c-Si) interface. Besides, due to the variation of SRV or P-doped concentration, different recombination mechanisms, including auger recombination and surface recombination, will dominant the total J 0, interface. In addition, the sensitivity of TOPCon solar cells electrical performance to SiO x thickness can be affected by rear SRV, and the sensitivity of TOPCon solar cells electrical performance to rear SRV can be affected by SiOx thickness.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. On the limiting efficiency for silicon heterojunction solar cells
2. ITRPV, International Technology Roadmap for Photovoltaic (ITRPV), 14th Edition.
3. Ultra-thin atomic layer deposited aluminium oxide tunnel layer passivated hole-selective contacts for silicon solar cells10.1016/j.solmat.2018.11.011 ↗
4. 16%-efficiency p-type TOPCon solar cell with ALD-Al2O3/MoOx/Ag as a hole-selective passivating contact10.1016/j.solener.2022.10.019 ↗
5. A strong-oxidizing mixed acid derived high-quality silicon oxide tunneling layer for polysilicon passivated contact silicon solar cell10.1016/j.solmat.2018.09.001 ↗
6. Polycrystalline silicon passivated tunneling contacts for high efficiency silicon solar cells10.1557/jmr.2016.77 ↗
7. Tunnel oxide passivated carrier-selective contacts based on ultra-thin SiO2 layers10.1016/j.solmat.2015.06.048 ↗
8. Excellent surface passivation of p-type TOPCon enabled by ozone-gas oxidation with a single-sided saturation current density of ∼ 4.5 fA/cm210.1016/j.solener.2023.05.028 ↗
9. Effect of plasma-assisted N2O/Ar oxidation on TOPCon solar cells
10. Passivation property of ultrathin SiOx:H/a-Si:H stack layers for solar cell applications10.1016/j.solmat.2018.05.004 ↗
11. Double-sided TOPCon solar cells on textured wafer with ALD SiOx layer
12. High-resolution structural investigation of passivated interfaces of silicon solar cells10.1016/j.solmat.2015.06.051 ↗
13. Influence of SiOx film thickness on electrical performance and efficiency of TOPCon solar cells
14. Role of polysilicon in poly-Si/SiOx passivating contacts for high-efficiency silicon solar cells10.1039/C9RA03560E ↗
15. J. Stuckelberger, G. Nogay, PhilippeWyss, recombination analysis of phosphorus-doped nanostructured silicon oxide passivating electron contacts for silicon solar cells, IEEE J. Photovoltaics, 8.10.1109/JPHOTOV.2017.2779871 ↗
16. 24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design
17. Optimization of activated phosphorus concentration in recrystallized polysilicon layers for the n-TOPCon solar cell application
18. Contactless determination of current–voltage characteristics and minority‐carrier lifetimes in semiconductors from quasi‐steady‐state photoconductance data10.1063/1.117723 ↗
19. Kane · 1985 · 578
20. Effect of silicon oxide thickness on polysilicon based passivated contacts for high-efficiency crystalline silicon solar cells10.1016/j.solmat.2018.05.011 ↗
21. Theoretical exploration towards high-efficiency tunnel oxide passivated carrier-selective contacts (TOPCon) solar cells10.1016/j.solener.2017.07.014 ↗
22. High efficiency n-type silicon solar cells with passivating contacts based on PECVD silicon films doped by phosphorus diffusion10.1016/j.solmat.2019.01.005 ↗
23. Stangl · 2006 · 1350
24. R.S. A. Froitzheim, L. Elstner, M. Kriegel, W. Fuhs, AFORS-HET: A COMPUTER-PROGRAM FOR THE SIMULATION OF HETEROJUNCTION SOLAR CELLS TO BE DISTRIBUTED FOR PUBLIC USE, in.
25. Computational analysis of a high-efficiency tunnel oxide passivated contact (TOPCon) solar cell with a low-work-function electron-selective-collection layer10.1016/j.solener.2018.06.008 ↗