journal article·2023-09

Effect of plasma-assisted N2O/Ar oxidation on TOPCon solar cells

Jiabin Huang, Zengchao Zhao, Ming Li, Jun Chen, Xiaorong Zhou, Xinxin Deng, Bin Li, Kailin Shen, Qiuyun Cheng, Xianwu Cai

Publisher page

Abstract

N 2 O/Ar gas mixture are used to deposit ultra-thin silicon oxide (SiO x ) layer by plasma enhanced chemical vapor deposition (PECVD), which is used as the tunneling oxide layer in the TOPCon (tunnel oxide passivated contacts) structure. It is found that the N 2O/Ar flow ratios strongly affect the properties of SiO x layer, such as deposition rate, the resistance of high temperature, passivation quality, etc., thus significantly affect the properties of polysilicon passivated contact structures and the efficiency of TOPCon solar cells. The deposition rate of SiO x layer and contact resistivity of SiO x/poly-Si(n +)/SiNx:H structure decrease with the increases of Ar flow. However, there is an optimal N 2O/Ar flow ratio to obtain the best passivation quality and the champion efficiency. The optimal flow ratio of N 2O/Ar= 5:2 is found, and obtain the optimum thickness of SiO x and uniform polysilicon passivated contact. The highest minority carrier lifetime (τ) of 5751 μs, highest implied open circuit voltage (iV oc) of 741.3 mV, lowest single side recombination saturation current density(J 0) of 4.79 fA/cm 2, contact resistivity(ρ contact) of 2.23 mΩ/cm 2 and champion efficiency of 25.06% are obtained at the flow ratio of N 2O/Ar= 5:2.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Silicon-based passivating contacts: the TOPCon Route
2. Firing-stable PECVD SiOxNy/n-poly-Si surface passivation for silicon solar cells10.1021/acsaem.1c00265 ↗
3. A passivated rear contact for high-efficiency N-type Si solar cellsenabling high Vocs and FF > 82
4. Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses10.1038/s41560-021-00805-w ↗
5. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
6. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
7. N-type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
8. Tunnel oxide passivated contacts formed by ion implantation for applications in silicon solar cells10.1063/1.4936223 ↗
9. Efficient carrier-selective p- and n-contacts for Si solar cells10.1016/j.solmat.2014.05.039 ↗
10. Carrier transport through the ultrathin silicon-oxide layer in tunnel oxide passivated contact (TOPCon) c-Si solar cells10.1016/j.solmat.2018.07.025 ↗
11. Tunnel oxide passivated contacts as an alternative to partial rear contacts10.1016/j.solmat.2014.06.015 ↗
12. monoPoly™ cells: large-area crystalline silicon solar cells with fire-through screen printed contact to doped polysilicon surfaces10.1016/j.solmat.2018.05.059 ↗
13. High-efficiency selective boron emitter formed by wet chemical etch-back for n-type screen-printed Si solar cells10.1063/1.4973626 ↗
14. Nitric acid oxidation of Si to form ultrathin silicon dioxide layers with a low leakage current density10.1063/1.1621720 ↗
15. A strong-oxidizing mixed acid derived high-quality silicon oxide tunneling layer for polysilicon passivated contact silicon solar cell10.1016/j.solmat.2018.09.001 ↗
16. Comparative study of differently grown tunnel oxides for p-type passivating contacts10.1016/j.egypro.2017.09.273 ↗
17. Phosphorus-diffused polysilicon contacts for solar cells10.1016/j.solmat.2015.06.001 ↗
18. Comparison of different types of interfacial oxides on hole-selective p+-poly-Si passivated contacts for high-efficiency c-Si solar cells10.1016/j.solmat.2020.110487 ↗
19. Tunnel oxide passivated carrier-selective contacts based on ultra-thin SiO2 layers grown by photo-oxidation or wet-chemical oxidation in ozonized water
20. 24.4% industrial tunnel oxide passivated contact solar cells with ozone-gas oxidation Nano SiOx and tube PECVD prepared in-situ doped polysilicon10.1016/j.solmat.2022.111803 ↗
21. Double-sided TOPCon solar cells on textured wafer with ALD SiOx layer
22. Material combination of Tunnel-SiO2 with a (sub-) Monolayer of ALD-AlOx on silicon offering a highly passivating hole selective contact10.1016/j.solmat.2020.110654 ↗
23. Nanoscale SiOx tunnel oxide deposition techniques and their infuence on cell parameters of TOPCon solar cells10.1007/s42341-021-00356-7 ↗
24. Tunnel oxide deposition techniques and their parametric influence on nano-scaled SiOx layer of TOPCon solar cell: a review10.3390/en15155753 ↗
25. Ultrathin silicon oxide prepared by in-line plasma-assisted N2O oxidation (PANO) and the application for n-type polysilicon passivated contact10.1016/j.solmat.2019.110389 ↗
26. Ultrathin SiO2 films on Si formed by N2O-plasma oxidation technique10.1016/0169-4332(94)90284-4 ↗
27. Passivation properties of tunnel oxide layer in passivated contact silicon solar cells10.1016/j.apsusc.2017.02.195 ↗
28. An industrially viable TOPCon structure with both ultra-thin SiOx and n+ -poly-Si processed by PECVD for p-type c-Si solar cells10.1016/j.solmat.2019.109926 ↗
29. Ar/N2O remote plasma-assisted oxidation of Si(100): plasma chemistry, growth kinetics, and interfacial reactions10.1116/1.591467 ↗
30. Lucovsky · 1990 · vol. 87
31. Constant current N2O plasma anodization of silicon10.1149/1.1837765 ↗
32. Electrical characterization of metal-oxide-semiconductor capacitors with anodic and plasma-nitrided oxides10.1116/1.582250 ↗
33. Oxynitridation of silicon by remote-plasma excited nitrogen and oxygen10.1063/1.116537 ↗
34. Nitrogen-atom incorporation at Si-SiO2 interfaces by a low-temperature(300°C), pre-deposition, remote-plasma oxidation using N2O10.1116/1.579749 ↗
35. Plasma-enhanced CVD of high quality insulating films10.1016/0169-4332(89)90415-7 ↗
36. Formation of thin film dielectrics by remote plasma-enhanced chemical-vapor deposition (remote PECVD)10.1016/0169-4332(89)90418-2 ↗
37. Chemistry of SiO2 plasma deposition10.1149/1.2221586 ↗
38. Remote plasma-enhanced chemical vapor deposition of SiO2 using Ar/N2O and SiH410.1149/1.1838898 ↗
39. Goleb · 1975
40. Studies of atomic oxygen in O2+CF4 rf discharges by twophoton laser induced fluorescence and optical emission spectroscopy10.1063/1.450339 ↗
41. O-atoms yields from microwave discharges in N2O/Ar mixtures10.1021/j100274a024 ↗
42. Diagnostics and modeling of N2O RF glow discharges10.1149/1.2096409 ↗
43. Modes and the alpha-gamma transition in rf capacitive discharges in N2O at different rf frequencies10.1063/1.2364135 ↗
44. Studying dopant diffusion from poly-Si passivating contacts10.1016/j.solmat.2019.109978 ↗
45. Deposition and characterization of SiON films using HMDS for photonics applications10.1088/0268-1242/22/2/008 ↗
46. Silicon nitride/silicon oxide interlayers for solar cell passivating contacts based on PECVD amorphous silicon10.1002/pssr.201510325 ↗
47. Influence of SiOx film thickness on electrical performance and efficiency of TOPCon solar cells10.1016/j.solmat.2020.110423 ↗
48. Study on the cleaning process of n+-poly-Si wraparound removal of TOPCon solar cells10.1016/j.solener.2020.09.028 ↗
49. Effective gettering of in-situ phosphorus-doped polysilicon passivating contact prepared using plasma-enhanced chemical-vapor deposition technique10.1016/j.solmat.2019.110256 ↗
50. Improved silicon oxide/polysilicon passivated contacts for high efficiency solar cells via optimized tunnel layer annealing10.1016/j.solmat.2020.110720 ↗