journal article·2023-09

Atomic-layer-deposited BOx/Al2O3 stack for crystalline silicon surface passivation

Xinyu Wang, Kun Gao, Dacheng Xu, Kun Li, Chunfang Xing, Xinliang Lou, Zhaojun Su, Xinbo Yang

Publisher page

Abstract

Surface passivation is a crucial factor in improving the efficiency of c -Si solar cells. In this work, we develop a boron oxide/aluminum oxide stack (BO x/Al 2O 3 ) using the atomic layer deposition technique, and investigate the passivation quality and mechanism on c-Si surfaces. The BO x/Al 2O 3 stacks display excellent surface passivation on c-Si surfaces after annealing, superior to that of Al 2O 3 single layers. With the optimal BO x/Al 2O 3 passivation stack, we obtained a very low dark current density ( J 0) of 7.8 fA/cm 2 (i V oc 725 mV) and 4.7 fA/cm 2 (i V oc 714.6 mV) on industrial n-type (5.3 Ω cm) and p-type (3.0 Ω cm) Cz wafers, respectively. The BO x/Al 2O 3 stack also shows excellent passivation performance on boron-doped p + emitters (110 Ω/sq), achieving a low J 0 of 15.1 fA/cm 2. The enhanced passivation quality of the BO x/Al 2O 3 stack can be attributed to the increased fixed negative charge density after thermal annealing. BO x/Al 2O 3 passivation stacks also can potentially act as an effective p -type dopant source for laser processing, which would be very desirable for high-efficiency c-Si solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (81)

Show source-provided references
1. Surface passivation of crystalline silicon solar cells: a review10.1002/1099-159X(200009/10)8:5<473::AID-PIP337>3.0.CO;2-D ↗
2. Fischer
3. The passivated emitter and rear cell (PERC): from conception to mass production10.1016/j.solmat.2015.06.055 ↗
4. Industrial silicon solar cells applying the passivated emitter and rear cell (PERC) concept-a review10.1109/JPHOTOV.2016.2571627 ↗
5. TOPCon – technology options for cost efficient industrial manufacturing10.1016/j.solmat.2021.111100 ↗
6. Polysilicon passivated junctions: the next technology for silicon solar cells10.1016/j.joule.2021.02.013 ↗
7. Silicon‐based passivating contacts: the TOPCon route10.1002/pip.3522 ↗
8. Surface passivation of crystalline silicon solar cells: present and future10.1016/j.solmat.2018.06.047 ↗
9. Carrier population control and surface passivation in solar cells10.1016/j.solmat.2018.04.026 ↗
10. Very low bulk and surface recombination in oxidized silicon wafers10.1088/0268-1242/17/1/306 ↗
11. Recombination at the interface between silicon and stoichiometric plasma silicon nitride10.1088/0268-1242/17/2/314 ↗
12. High-quality surface passivation of silicon solar cells in an industrial-type inline plasma silicon nitride deposition system10.1002/pip.523 ↗
13. Ultralow surface recombination of c-Si substrates passivated by plasma-assisted atomic layer deposited Al2O310.1063/1.2240736 ↗
14. Influence of the deposition temperature on the c-Si surface passivation by Al2O3 films synthesized by ALD and PECVD10.1149/1.3276040 ↗
15. Very low surface recombination velocities on p-type silicon wafers passivated with a dielectric with fixed negative charge10.1016/j.solmat.2006.04.014 ↗
16. Influence of the oxidant on the chemical and field-effect passivation of Si by ALD Al2O310.1149/1.3501970 ↗
17. Surface passivation of c-Si by atmospheric pressure chemical vapor deposition of Al2O310.1063/1.4718596 ↗
18. Excellent silicon surface passivation with 5 angstrom thin ALD Al2O3 layers: influence of different thermal post-deposition treatments10.1002/pssr.201105188 ↗
19. Highly effective electronic passivation of silicon surfaces by atomic layer deposited hafnium oxide10.1063/1.4973988 ↗
20. Passivation properties of atomic-layer-deposited hafnium and aluminum oxides on Si surfaces10.1109/TED.2011.2176943 ↗
21. Light-enhanced surface passivation of TiO2-coated silicon10.1002/pip.1132 ↗
22. Excellent c-Si surface passivation by low-temperature atomic layer deposited titanium oxide10.1063/1.4885096 ↗
23. Titanium oxide: a re-emerging optical and passivating material for silicon solar cells10.1016/j.solmat.2016.05.006 ↗
24. High-performance TiO2 -based electron-selective contacts for crystalline silicon solar cells10.1002/adma.201600926 ↗
25. Ultrathin titanium dioxide nanolayers by atomic layer deposition for surface passivation of crystalline silicon10.1109/JPHOTOV.2016.2545404 ↗
26. Electronic passivation of silicon surfaces by thin films of atomic layer deposited gallium oxide10.1063/1.4890737 ↗
27. Plasma enhanced atomic layer deposition of gallium oxide on crystalline silicon: demonstration of surface passivation and negative interfacial charge10.1002/pssr.201510056 ↗
28. Silicon surface passivation by transparent conductive zinc oxide10.1063/1.5054166 ↗
29. Passivation of c-Si surfaces by ALD tantalum oxide capped with PECVD silicon nitride10.1016/j.solmat.2015.05.032 ↗
30. POx/Al2O3 stacks for c-Si surface passivation: material and interface properties10.1021/acsaelm.1c00516 ↗
31. POx/Al2O3 stacks: highly effective surface passivation of crystalline silicon with a large positive fixed charge10.1063/1.5029460 ↗
32. Investigation of crystalline silicon surface passivation by positively charged POx/Al2O3 stacks10.1016/j.solmat.2018.05.007 ↗
33. POx/Al2O3 stacks for surface passivation of Si and InP10.1016/j.solmat.2022.111911 ↗
34. Nitric acid pretreatment for the passivation of boron emitters for n-type base silicon solar cells10.1063/1.2870202 ↗
35. Excellent passivation of highly doped p-type Si surfaces by the negative-charge-dielectric Al2O310.1063/1.2784168 ↗
36. Surface passivation of boron-diffused p-type silicon surfaces with (1 0 0) and (1 1 1) orientations by ALD Al2O3 layers10.1109/JPHOTOV.2012.2235525 ↗
37. Very low surface recombination velocity of boron doped emitter passivated with plasma-enhanced chemical-vapor-deposited AlOx layers10.1016/j.tsf.2012.08.050 ↗
38. Surface passivation of silicon solar cells using plasma-enhanced chemical-vapour-deposited SiN films and thin thermal SiO2/plasma SiN stacks10.1088/0268-1242/16/3/308 ↗
39. Zero-charge” SiO2/Al2O3 stacks for the simultaneous passivation of n+ and p+ doped silicon surfaces by atomic layer deposition10.1016/j.solmat.2015.07.040 ↗
40. Silicon surface passivation by gallium oxide capped with silicon nitride10.1109/JPHOTOV.2016.2566881 ↗
41. Atomic-layer-deposited Al-doped zinc oxide as a passivating conductive contacting layer for n+-doped surfaces in silicon solar cells10.1016/j.solmat.2021.111386 ↗
42. Temporal and spatial atomic layer deposition of Al-doped zinc oxide as a passivating conductive contact for silicon solar cells10.1016/j.solmat.2022.111869 ↗
43. Excellent passivation of n‐type silicon surfaces enabled by pulsed‐flow plasma-enhanced chemical vapor deposition of phosphorus oxide capped by aluminum oxide
44. Effective passivation of p+ and n+ emitters using SiO2/Al2O3/SiNx stacks: surface passivation mechanisms and application to industrial p-PERT bifacial Si solar cells10.1016/j.solmat.2018.07.007 ↗
45. Solid solubilities and thermodynamic properties of aluminum in solid silicon10.1149/1.1588300 ↗
46. Analysis of local aluminum rear contacts of bifacial PERC+ solar cells10.1109/JPHOTOV.2016.2551465 ↗
47. Al-Si contact formation involving back surface field and voids of PERC10.1016/j.solmat.2022.111866 ↗
48. A 22.3% efficient p‐type back junction solar cell with an Al‐printed front‐side grid and a passivating n+‐type polysilicon on oxide contact at the rear side10.1002/solr.202000435 ↗
49. 716 mV open‐circuit voltage with fully screen‐printed p‐type back junction solar cells featuring an aluminum front grid and a passivating polysilicon on oxide contact at the rear side
50. On the chances and challenges of combining electron‐collecting n POLO and hole‐collecting Al‐p+ contacts in highly efficient p‐type c‐Si solar cells
51. Diffusion of phosphorus and boron from atomic layer deposition oxides into silicon10.1002/pssa.201900306 ↗
52. Passivating boron silicate glasses for co-diffused high-efficiency n-type silicon solar cell application10.1063/1.4927667 ↗
53. Self-aligned local contact opening and n+ diffusion by single-step laser doping from POx/Al2O3 passivation stacks10.1016/j.solmat.2020.110717 ↗
54. Fully screen‐printed silicon solar cells with local Al‐p+ and n‐type POLO interdigitated back contacts with a VOC of 716 mV and an efficiency of 2310.1002/pip.3399 ↗
55. Atomic layer deposition of B2O3/SiO2 thin films and their application in an efficient diffusion doping process10.1039/c4tc00648h ↗
56. Measurement of the emitter saturation current by a contactless photoconductivity decay method
57. Electrical characterization of polyfluorene-based metal-insulator-semiconductor diodes10.1557/PROC-0937-M07-08 ↗
58. Atomic layer deposition of localized boron- and hydrogen-doped aluminum oxide using trimethyl borate as a dopant precursor10.1021/acs.chemmater.9b04967 ↗
59. The vibrational spectra of orthoboric acid and its thermal decomposition products10.1016/0022-2860(71)87074-6 ↗
60. P-type doping of silicon suitable for structures with high aspect ratios by using a dopant source of boron oxide grown by atomic layer deposition10.1149/1.3700939 ↗
61. Plasma-assisted atomic layer deposition: basics, opportunities, and challenges
62. Chemical structure of the interface in ultrathin HfO2/Si films10.1063/1.1645984 ↗
63. In situ XPS study of low temperature atomic layer deposition of B2O3 films on Si using BCl3 and H2O precursors
64. High-performance bilayer flexible resistive random access memory based on low-temperature thermal atomic layer deposition10.1186/1556-276X-8-92 ↗
65. Investigation of the initial deposition steps and the interfacial layer of Atomic Layer Deposited (ALD) Al2O3 on Si10.1016/j.apsusc.2019.06.215 ↗
66. Al2O3/SiNx stacks with ozone-based ALD Al2O3 for surface passivation: superior layer stability after firing
67. Silicon surface passivation by hydrogen termination - a comparative-study of preparation methods10.1063/1.343839 ↗
68. Review of advanced hydrogen passivation for high efficient crystalline silicon solar cells10.1016/j.mssp.2018.01.019 ↗
69. Emitter formation with boron diffusion from PECVD deposited boron-doped silicon oxide for high-efficiency TOPCon solar cells10.1016/j.solmat.2022.111713 ↗
70. Advances in the surface passivation of silicon solar cells10.1016/j.egypro.2012.02.004 ↗
71. Comparison of passivation properties of plasma-assisted ALD and APCVD deposited Al2O3 with SiNx capping10.1016/j.solmat.2020.110718 ↗
72. Boron emitter passivation with Al2O3 and Al2O3/SiNx stacks using ALD Al2O310.1109/JPHOTOV.2012.2226145 ↗
73. Controlling the fixed negative charge formation in Si/high-k interfaces
74. Status and prospects of Al2O3-based surface passivation schemes for silicon solar cells
75. Modulation doping of silicon using aluminium-induced acceptor states in silicon dioxide10.1038/srep46703 ↗
76. The negative fixed charge of atomic layer deposited aluminum oxide—a two-dimensional SiO2/AlOx interface effect10.1088/1361-6463/abf675 ↗
77. Investigation on microstructure and its transformation mechanisms of B2O3-SiO2-Al2O3-CaO brazing flux system10.1515/htmp-2020-0021 ↗
78. Structural properties of Al-O monolayers in SiO2 on silicon and the maximization of their negative fixed charge density10.1021/acsami.8b06098 ↗
79. Effective optimization of surface passivation on porous silicon carbide using atomic layer deposited Al2O310.1039/C6RA27281A ↗
80. Dipole formation and electrical properties according to SiO2 layer thickness at an Al2O3/SiO2 interface10.1021/acs.jpcc.1c03730 ↗
81. Controlling the fixed charge and passivation properties of Si(100)/Al2O3 interfaces using ultrathin SiO2 interlayers synthesized by atomic layer deposition10.1063/1.3658246 ↗