Design of near-ideal and omnidirectional selective solar absorber for high-temperature applications
Source abstract
Abstract
Efficient absorption of solar radiation with minimal thermal losses is required for efficient solar-to-thermal energy conversion. For this purpose, spectrally selective and omnidirectional surfaces are required that have strong, ideally unity, absorption in the solar spectral window for all incident angles and low, ideally zero, emissivity in the spectral range of blackbody radiation at operating temperature. In this article, we propose theoretically and experimentally lithographic free broadband and omnidirectional solar absorber for high-temperature applications made in a dielectric-metal-dielectric-metal fashion. We have used chromium ( Cr), titanium ( Ti ), and tungsten ( W ) as a metal layer in the designed absorber due to their high thermal stability at high temperatures and compared their performance. The power balance equation is used to calculate the steady-state temperature considering free and forced convection conditions. W -based absorber shows >90% absorption in the solar window below cutoff wavelength for blackbody working at 600 K with <10% emissivity in the thermal window. Finally, we fabricate the W -based sample and experimentally measure the temperature rise of 100 K under one sun condition. The designed absorber can be used for several solar-thermal applications including solar-steam to electricity generation, water purification, space heating, and solar-thermal energy storage.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal Radiation and Cooling Technologies · Solar Thermal and Photovoltaic Systems · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
2. Efficiency limits of concentrating spectral-splitting hybrid photovoltaic-thermal ( PV-T ) solar collectors and systems
3. A general methodology to measure the light-to-heat conversion efficiency of solid materials10.1038/s41377-023-01167-6 ↗
4. Multipronged heat-exchanger based on femtosecond laser-nano/microstructured Aluminum for thermoelectric heat scavengers10.1016/j.nanoen.2020.104987 ↗
5. Nano Energy Enhancing thermoelectric output power via radiative cooling with nanoporous alumina10.1016/j.nanoen.2019.104060 ↗
6. Spectral absorption control of femtosecond laser-treated metals and application in solar-thermal devices10.1038/s41377-020-0242-y ↗
7. Metallic nanostructures for light trapping in energy-harvesting devices10.1038/lsa.2014.42 ↗
8. Prototype steam turbine for solar power production10.1155/2020/4589281 ↗
9. Solar thermophotovoltaics: brief review and a new look10.1016/0927-0248(94)90284-4 ↗
10. High-index-contrast photonic structures: a versatile platform for photon manipulation10.1038/s41377-022-01021-1 ↗
11. Superwicking black metal surface for solar-thermal water sanitation10.1364/OPN.31.12.000060 ↗
12. Experimental studies on a ground coupled heat pump with solar thermal collectors for space heating10.1016/j.energy.2011.06.037 ↗
13. A review of solar collectors and thermal energy storage in solar thermal applications10.1016/j.apenergy.2012.11.051 ↗
14. Metal Halide Perovskite for next-generation optoelectronics: progresses and prospects10.1186/s43593-022-00033-z ↗
15. Lead halide perovskite sensitized WSe2 photodiodes with ultrahigh open circuit voltages10.1186/s43593-023-00040-8 ↗
16. A nanophotonic solar thermophotovoltaic device10.1038/nnano.2013.286 ↗
17. Micro- and nanostructured surfaces for selective solar absorption10.1002/adom.201500063 ↗
18. Absorber and emitter for solar thermo- photovoltaic systems to achieve efficiency exceeding the Shockley-Queisser limit10.1364/OE.17.015145 ↗
19. Nanofluid-based optical filter optimization for PV/T systems10.1038/lsa.2012.34 ↗
20. Concentrating solar power10.1021/acs.chemrev.5b00397 ↗
21. High-temperature infrared camouflage with efficient thermal management10.1038/s41377-020-0300-5 ↗
22. Zhang · 2007
23. Silver nanoparticles with an armor layer embedded in the alumina matrix to form nanocermet thin films with sound thermal stability10.1021/am502254s ↗
24. Preventing the degradation of Ag nanoparticles using an ultrathin a-Al 2O3 layer as protective barrier10.1021/jp401421m ↗
25. Ultra-broad flat band light absorber based on multisized slow-wave hyperbolic metamaterial thin-films
26. Contactless steam generation and superheating under one sun illumination10.1038/s41467-018-07494-2 ↗
27. 1-D metal-dielectric-metal grating structure as an ultra-narrowband perfect plasmonic absorber in the visible and its application in glucose detection10.1007/s11468-020-01161-3 ↗
28. Near-infrared and short-wavelength infrared photodiodes based on dye–perovskite composites10.1002/adfm.201702485 ↗
29. Ultrabroadband light absorption by a sawtooth anisotropic metamaterial slab10.1021/nl204118h ↗
30. High performance broadband absorber in the visible band by engineered dispersion and geometry of a metal-dielectric-metal stack10.1063/1.4771994 ↗
31. A design of selective solar absorber for high temperature applications10.1016/j.solener.2018.04.052 ↗
32. Broadband perfect absorber based on one ultrathin layer of refractory metal10.1364/OL.40.002592 ↗
33. Ultrabroadband strong light absorption based on thin multilayered metamaterials10.1002/lpor.201400157 ↗
34. Ultrathin resonant-cavity-enhanced solar cells with amorphous germanium absorbers10.1002/adom.201400386 ↗
35. All ceramic-based metal-free ultra-broadband perfect absorber10.1007/s11468-019-00976-z ↗
36. Plasmonic black gold by adiabatic nanofocusing and absorption of light in ultra-sharp convex grooves10.1038/ncomms1976 ↗
37. Ultra-broadband metamaterial absorbers from long to very long infrared regime10.1038/s41377-021-00577-8 ↗
38. Semiconductor-based multilayer selective solar absorber for unconcentrated solar thermal energy conversion10.1038/s41598-017-05235-x ↗
39. On-chip ultrasensitive and rapid hydrogen sensing based on plasmon-induced hot electron–molecule interaction10.1038/s41377-023-01123-4 ↗
40. Angle-selective perfect absorption with two-dimensional materials
41. Tungsten black absorber for solar light with wide angular operation range10.1063/1.2936997 ↗
42. Perfect metamaterial absorber10.1103/PhysRevLett.100.207402 ↗
43. Lithography-free large-area metamaterials for stable thermophotovoltaic energy conversion10.1002/adom.201500727 ↗
44. Multilayer tungsten-alumina-based broadband light absorbers for high-temperature applications10.1364/OME.6.002704 ↗
45. Ultra-narrow-band light dissipation by a stack of lamellar silver and alumina
46. Phase change material-based nano-cavity as an ef fi cient optical modulator10.1088/1361-6528/abcb7a ↗
47. Phase change material based hot electron photodetection10.1039/D0NR06456D ↗
48. Cengel · 2004 · vol. 4 · 874
49. Spectrally selective NbAlN/NbAlON/Si3N4 tandem absorber for high-temperature solar applications10.1016/j.solmat.2007.11.004 ↗
50. Nano-Cr-film-based solar selective absorber with high photo-thermal conversion efficiency and good thermal stability10.1364/OE.20.028953 ↗
51. Spectral properties and thermal stability of CrN/CrON/Al2O3 spectrally selective coating10.1016/j.tsf.2016.06.055 ↗
52. Growth and characterization of spectrally selective Cr2O3/Cr/Cr2O3 multilayered solar absorber by e-beam evaporation10.1016/j.jallcom.2017.11.036 ↗
53. Large-scale nanophotonic solar selective absorbers for high-effi ciency solar thermal energy conversion10.1002/adma.201501686 ↗
54. Simulation of two-dimensional Mo photonic crystal surface for high-temperature solar-selective absorber10.1002/pssa.200925573 ↗
55. Design of wide-angle selective absorbers/emitters with dielectric filled metallic photonic crystals for energy applications10.1364/OE.22.00A144 ↗
56. Enhanced thermal stability of W-Ni-Al 2 O 3 cermet-based spectrally selective solar absorbers with tungsten infrared refl ectors
57. Tandem absorber for high temperature solar selective applications
58. Structured graphene metamaterial selective absorbers for high efficiency and omnidirectional solar thermal energy conversion
59. Metamaterial-based integrated plasmonic absorber/emitter for solar thermo-photovoltaic systems10.1088/2040-8978/14/2/024005 ↗
60. Color-preserving passive radiative cooling for an actively temperature-regulated enclosure10.1038/s41377-022-00810-y ↗