journal article·2023-08

Tribological behavior of 316H stainless steel in NaNO3-KNO3 molten salt at elevated temperature

Peiying Shi, Bin Leng, Xiangxi Ye, Shubin Wang, Litao Chang, Xiaoke Li, Xiaoli Li, Hefei Huang

Publisher page

Abstract

The corrosion behaviors of stainless steels in various high-temperature molten salt have been extensively investigated. However, the tribological behavior of the alloys acting as moving parts in the molten salt is rarely reported. In this work, 316H stainless steel was selected to comparatively study its high-temperature tribo-corrosion performance in molten solar salt (60% NaNO 3+40% KNO 3 , wt.). Under the drying sliding condition, the wear rate increases at 500 °C though the friction coefficient decreases compared to that at room temperature. In contrast, compared to the 500 °C dry sliding condition, the wear resistance of 316H at 500 °C in molten nitrate salt is remarkably improved owing to the lubrication effect of the molten salt and the enhanced oxidation tendency on the worn surface.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Molten salts in the light of corrosion mitigation strategies and embedded with nanoparticles to enhance the thermophysical properties for CSP plants10.1016/j.solmat.2020.110768 ↗
2. Heat transfer fluids for concentrating solar power systems–a review10.1016/j.apenergy.2015.01.125 ↗
3. High-temperature corrosion performance of austenitic stainless steels type AISI 316L and AISI 321H, in molten Solar Salt10.1016/j.solener.2018.11.019 ↗
4. Molten salt corrosion mechanisms of nitrate based thermal energy storage materials for concentrated solar power plants: a review10.1016/j.solmat.2019.02.012 ↗
5. Goods · 1994
6. High temperature corrosion in molten solar salt: the role of chloride impurities10.1002/maco.201609300 ↗
7. Material aspects of Solar Salt for sensible heat storage10.1016/j.apenergy.2013.04.072 ↗
8. Corrosion and electrochemical investigations for stainless steels in molten Solar Salt: the influence of chloride impurity10.1016/j.est.2021.102675 ↗
9. High temperature corrosion behavior on molten nitrate salt-based nanofluids for CSP plants10.1016/j.renene.2018.07.018 ↗
10. Experimental research of high temperature dynamic corrosion characteristic of stainless steels in nitrate eutectic molten salt10.1016/j.solener.2020.09.034 ↗
11. Corrosion behavior of stainless and low-chromium steels and IN625 in molten nitrate salts at 600°C10.1016/j.solmat.2015.08.011 ↗
12. Corrosion resistance of high nickel alloys in solar salt at 600 °C for up to 4000 h
13. Effect of thermal aging on corrosion behavior of type 316H stainless steel in molten chloride salt10.1016/j.corsci.2021.109784 ↗
14. Perspectives on selected alloys in contact with eutectic melts for thermal storage: nitrates, carbonates and chlorides10.1016/j.solener.2021.06.069 ↗
15. Development of a high-temperature, long-shafted, molten-salt pump for power tower applications10.1115/1.1464126 ↗
16. Material selection and corrosion studies of candidate bearing materials for use in molten chloride salt
17. Tribo-corrosion of coatings: a review10.1088/0022-3727/40/18/S10 ↗
18. Mapping tribo-corrosion processes in dry and in aqueous conditions: some new directions for the new millennium10.1016/S0301-679X(02)00059-2 ↗
19. The evaluation of tribo-corrosion synergy for WC–Co hardmetals in low stress abrasion10.1016/j.wear.2003.04.001 ↗
20. Tribological behavior of ceramic-alloy bearing contacts in molten salt lubrication for concentrating solar power10.1016/j.solmat.2021.111065 ↗
21. Effects of particle size and concentration of magnesium oxide on the lubricating performance of a chloride molten salt for concentrating solar power10.1021/acssuschemeng.0c09123 ↗
22. Influence of alkaline species on the high temperature lubrication of molten carbonate10.1016/j.triboint.2021.107257 ↗
23. High load capability, sticking scale inhabitation and promising lubrication of sodium carbonate coating for steel/steel contact at high temperature10.1016/j.triboint.2020.106594 ↗
24. Surface morphology in engineering applications: influence of roughness on sliding and wear in dry fretting10.1016/j.triboint.2011.04.020 ↗
25. Influence of surface preparation on roughness parameters, friction and wear10.1016/j.wear.2008.04.017 ↗
26. Effect of atmosphere, temperature and carbide size on the sliding friction of self-mated HVOF WC–CoCr contacts10.1016/j.triboint.2016.04.032 ↗
27. Microstructural characterisation of subsurface deformation and the degradation of Stellite 6 induced by self-mated sliding contact in a simulated PWR environment10.1016/j.triboint.2021.106899 ↗
28. Lead-bismuth liquid metal: lubrication behaviors10.1016/j.wear.2019.04.027 ↗
29. Friction and wear behavior of CrN coating on 316L stainless steel in liquid sodium at elevated temperature10.1016/j.triboint.2019.106079 ↗
30. Temperature-mediated tribological characteristics of 40CrNiMoA steel and Inconel 718 alloy during sliding against Si3N4 counterparts10.1007/s40544-020-0455-3 ↗
31. High temperature tribology and wear of selective laser melted (SLM) 316L stainless steel
32. The effect of vacancy generation on plastic deformation10.1016/0036-9748(80)90295-1 ↗
33. Application of the Q-n-P-treatment for increasing the wear resistance of low-alloy steel with 0.75% C, mater
34. Chan · 2020
35. Effect of Li metal addition on corrosion control of Hastelloy N and stainless steel 316H in molten LiF-NaF-KF10.1016/j.jnucmat.2021.153098 ↗
36. Raman microspectroscopy of some iron oxides and oxyhydroxides10.1002/(SICI)1097-4555(199711)28:11<873::AID-JRS177>3.0.CO;2-B ↗
37. Chromium oxides mixtures in PLD films investigated by Raman spectroscopy
38. Raman spectra of CrO2 and MoO2 single Crystals10.1016/0038-1098(72)90247-5 ↗
39. Facile synthesis of large area pebble-like β-NaFeO2 perovskite for simultaneous sensing of dopamine, uric acid, xanthine and hypoxanthine in human blood10.1016/j.msec.2020.110631 ↗
40. One-step solid-state reaction synthesis of β-NaFeO2 nanopebble as high capacity cathode material for sodium ion batteries10.1016/j.matlet.2020.127739 ↗
41. Effects of sodium nitrate and heat treatment atmosphere on the synthesis of α–NaFeO2 layered oxide10.1016/j.matchemphys.2020.122948 ↗
42. Raman spectroscopic studies of mixed crystals of NaNO3–KNO3 quenched from different temperatures: evidence for limited solid solutions in the system10.1002/(SICI)1097-4555(199906)30:6<441::AID-JRS393>3.0.CO;2-X ↗
43. High-temperature corrosion behaviour of metal alloys in commercial molten salts10.1016/j.solener.2020.03.010 ↗
44. Corrosion of stainless steels and carbon steel by molten mixtures of commercial nitrate salts10.1361/10599490417542 ↗
45. Microstructure and tribological behavior of a novel atmospheric plasma sprayed AlCoCrFeNi high entropy alloy matrix self-lubricating composite coatings10.1016/j.triboint.2020.106470 ↗
46. Wear properties on AA2014/Al2O3/TiB2 hybrid metal matrix composites
47. Study on serrated chip formation and tool wear of cermet tools for milling stainless steel 3Cr13Cu10.1007/s00170-014-6476-1 ↗
48. Dry machinability of nickel-based weld-hardfacing layers for hot tooling10.1016/j.ijmachtools.2006.12.007 ↗
49. Investigation of serrated chip morphology change regular in the burning of titanium alloys10.1007/s00170-016-8662-9 ↗
50. Shear band formation and wear mechanism of titanium alloy powder metallurgy material prepared by HIP using Ti-6Al-4V pre-alloy powder10.1007/s00170-017-1008-4 ↗
51. Influence of cutting parameters and tool wear on the surface integrity of cobalt-based stellite 6 alloy when machined under a dry cutting environment10.1007/s11665-016-2438-0 ↗
52. Effect of QPQ on the fretting wear behavior of TP316H steel at varying temperatures in liquid sodium10.1016/j.jnucmat.2022.153583 ↗
53. Dry sliding wear behavior of AM60B magnesium alloy10.1016/j.wear.2012.11.039 ↗
54. Tribo-induced surface structure of Nickel-based superalloy at elevated temperature10.1016/j.apsusc.2021.151290 ↗
55. A new strong pearlitic multi-principal element alloy to withstand wear at elevated temperatures10.1016/j.actamat.2022.117700 ↗
56. Superior wear resistance in a TaMoNb compositionally complex alloy film via in-situ formation of the amorphous-crystalline nanocomposite layer and gradient nanostructure10.1016/j.actamat.2022.118503 ↗
57. Achieving exceptional wear resistance in a compositionally complex alloy via tuning the interfacial structure and chemistry10.1016/j.actamat.2020.02.039 ↗